| Issue |
MATEC Web of Conferences
Volume 159, 2018
The 2nd International Joint Conference on Advanced Engineering and Technology (IJCAET 2017) and International Symposium on Advanced Mechanical and Power Engineering (ISAMPE 2017)
|
|
|---|---|---|
| Article Number | 02064 | |
| Number of page(s) | 6 | |
| Section | Manufacturing | |
| DOI | https://doi.org/10.1051/matecconf/201815902064 | |
| Published online | 30 March 2018 | |
An innovative method to produce drop-in fuel by alkaline earth-transition metals basic soap decarboxylation
1
Department of Chemical Engineering, Institut Teknologi Bandung, Bandung 40132, Indonesia
2
Department of Agriculture Product Technology, Universitas Kristen Artha Wacana, Kupang 85000, Indonesia
* Corresponding author: godliefneonufa@gmail.com
Decarboxylation of metal soap is an emerging method to produce drop-in fuels as an alternative to the expensive hydrotreatment process. In this study, the Mg-Fe basic soap produced from palm kernel fatty acid had been successfully decarboxylated into jet-fuel type biohydrocarbons. The Mg-Fe basic soap with ratio of 8:2 mol was decarboxylated for 5 hours at atmospheric pressure and temperature varied up to 370°C; it produced a liquid product whose yield was around 60 %-weight. The resulting hydrocarbon product was a complex mixture consisted of normal paraffins in the range of carbon chain length C8 – C17, iso-and cyclo-paraffins, and various olefin products.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.