MATEC Web of Conferences
Volume 159, 2018The 2nd International Joint Conference on Advanced Engineering and Technology (IJCAET 2017) and International Symposium on Advanced Mechanical and Power Engineering (ISAMPE 2017)
|Number of page(s)||5|
|Published online||30 March 2018|
Characterization chip formation of commercial steel materials at low speed cylindrical grinding processes
Diponegoro University, Department of Mechanical Engineering, 50275, Jl. Prof Soedharto, Tembalang, Semarang, Indonesia
* Corresponding author: firstname.lastname@example.org
Cylindrical grinding is the process of metal removal using multiple cutting point. The objective of the study is to investigate the chip characteristics (shape and width) and surface roughness materials. The materials are AISI 1020, AISI 1045, AISI 1090, AISI D2, and AISI 4340 with a grinding wheels WA46K8V. The research is using cylindrical grinding processes at low-speed workpiece 100 rpm, depth of cut 0.5 mm, in dry condition. Result of research is comparing characteristic chip with variable feet rate 120 mm/min, 420 mm/min, 1300 mm/min. The result is to show the increasing feedrate lead, the growth of chip width and high surface roughness value. On materials AISI 1020, AISI 1045, AISI 1090, and AISI 4340 show that chips width is related to hardness value.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.