Open Access
| Issue |
MATEC Web of Conferences
Volume 159, 2018
The 2nd International Joint Conference on Advanced Engineering and Technology (IJCAET 2017) and International Symposium on Advanced Mechanical and Power Engineering (ISAMPE 2017)
|
|
|---|---|---|
| Article Number | 02027 | |
| Number of page(s) | 6 | |
| Section | Manufacturing | |
| DOI | https://doi.org/10.1051/matecconf/201815902027 | |
| Published online | 30 March 2018 | |
- F. Berndta, A..van Bennekom, Pump shaft failures - a compendium of case studies, Engineering Failure Analysis 8,135 –144. (2001) [Google Scholar]
- ASM Metals Handbook. Failure analysis and prevention, vol. 11. 9th ed. pp. 463. (1985) [Google Scholar]
- Peterson RE. S.ress concentration factors. New York: Wiley. (1974) [Google Scholar]
- ASM Metals Handbook. Mechanical testing, vol. 8. 9th ed. 364. (1985) [Google Scholar]
- Yang ZG, Gong Y, Yuan JZ. Failure analysis of leakage on titanium tubes within heat exchangers in a nuclear power plant. Part I: electrochemical corrosion. Mater Corros; 63(1):7–17. (2012) [CrossRef] [Google Scholar]
- Gong ZG, Yang JZ. Failure analysis of leakage on titanium tubes within heat exchangers in a nuclear power plant. Part II: mechanical degradation. Mater Corros;63(1):18–28. (2012) [Google Scholar]
- Gong Y, Yang C, Yao C, Yang ZG. Acidic/caustic alternating corrosion on carbon steel pipes in heat exchanger of ethylene plant. Mater Corros;62(10):967–78. (2010) [CrossRef] [Google Scholar]
- Gong Y, Yang ZG. Corrosion evaluation of one dry desulfurization equipment-circulating fluidized bed boiler. Mater Des;32(1):671–81. (2011) [CrossRef] [Google Scholar]
- Gong Y, Cao J, Ji LN, Yang C, Yao C, Yang ZG. Assessment of creep rupture properties for dissimilar steels welded joints between T92 and HR3C. Fatigue Fract Eng Mater Struct;34(2):83–96. (2011) [CrossRef] [Google Scholar]
- Gong Y, Yang ZG, Yang FY. Heat strength evaluation and microstructures observation of the welded joints of one China-made T91 steel. J Mater Eng Perform;21(7):1313–9. (2012) [CrossRef] [Google Scholar]
- Chen Fei-Jun, Yao Chen, Yang Zhen-Guo. Failure analysis on abnormal wall thinning of heat-transfer titanium tubes of condensers in nuclear power plant Part I: corrosion and wear. Eng Fail Anal;37:29–41. (2014) [CrossRef] [Google Scholar]
- Chen Fei-Jun, Yao Chen, Yang Zhen-Guo. Failure analysis on abnormal wall thinning of heat-transfer titanium tubes of condensers in nuclear power plant Part II: erosion and cavitation corrosion. Eng Fail Anal;37:42–52. (2014) [CrossRef] [Google Scholar]
- Gong Yi, Yang Zhen-Guo, Meng Xin-Hao.(2013) Failure analysis of one peculiar’Yin-Yang’ corrosion morphology on heat exchanger tubes in purified. terephthalic acid (PTA) dryer. Eng Fail Anal;31:203–10. [CrossRef] [Google Scholar]
- Iacoviello F, Boniardi M, La Vecchia GM. Fatigue crack propagation in austeno– ferritic duplex stainless steel 22 Cr 5 Ni. Int J Fatigue;21:957–63. (1999) [CrossRef] [Google Scholar]
- Sieurin H, Sandstrom R. Fracture toughness of a welded duplex stainless steel. Eng Fract Mech;73:377–90. (2006) [CrossRef] [Google Scholar]
- Sieurin H, Sandstrom R. Sigma phase precipitation in duplex stainless steel 2205. Mater Sci Eng A;444(1-2):271–6. (2007) [CrossRef] [Google Scholar]
- Lo I-Hsuang, Tsai Wen-Ta. Effect of selective dissolution on fatigue crack initiation in 2205 duplex stainless steel. Corros Sci;49(4):1847–61. (2007) [CrossRef] [Google Scholar]
- Balbi M, Avalos M, El Bartali A, Alvarez-Armas I. Microcrack growth and fatigue behavior of a duplex stainless steel. Int J Fatigue;31(11-12):2006–13. (2009) [CrossRef] [Google Scholar]
- Sahu JK, Krupp U, Christ HJ. Fatigue crack initiation behavior in embrittled austenitic–ferritic stainless steel. Int J Fatigue 2012;45:8–14. [CrossRef] [Google Scholar]
- Chiu PK, Weng KL, Wang SH, Yang JR, Huang YS, Fang Jason. Low-cycle fatigue-induced martensitic transformation in SAF 2205 duplex stainless steel. Mater Sci Eng A;398(1-2):349–59. (2005) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.