MATEC Web of Conferences
Volume 159, 2018The 2nd International Joint Conference on Advanced Engineering and Technology (IJCAET 2017) and International Symposium on Advanced Mechanical and Power Engineering (ISAMPE 2017)
|Number of page(s)||6|
|Published online||30 March 2018|
The Comparison of Bond Strength between Geopolymer Concrete and OPC Concrete for Plain Reinforcing Bars
Dept. Of Civil Engineering, Diponegoro University, Indonesia
2 Master Program in Civil Engineering, Diponegoro University, Indonesia
3 Dept. Of Civil Engineering, Gajah Mada University, Indonesia
* Corresponding author : email@example.com
This paper describes the research on bond behavior of plain reinforcing bars in geopolymer and normal concrete. The geopolymer concrete in this research was made of class F fly ash taken from Tanjung Jati Electric Steam Power Plant (PLTU) with Sodium Hydroxide (NaOH) and Sodium Silicate (Na2SiO3) as alkaline activator, added in the mixture. The effect of bar size was studied by varying the bar diameter in range 10 mm to 19 mm. Each bar was casted in the center of concrete blocks made of geopolymer as well as normal concrete. Pull-out tests were carried out to the specimens that have reached 28 days of age. The test results show that the bond behavior of geopolymer concrete differs substantially from normal concrete, where geopolymer concrete has a higher bond strength when compared to normal concrete with identical concrete strengths.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.