MATEC Web of Conferences
Volume 159, 2018The 2nd International Joint Conference on Advanced Engineering and Technology (IJCAET 2017) and International Symposium on Advanced Mechanical and Power Engineering (ISAMPE 2017)
|Number of page(s)||6|
|Published online||30 March 2018|
Design and Construction of Spud Housing for Floating Dock
Department of Naval Architecture, Institut Teknologi Sepuluh Nopember, 60111, Surabaya, Indonesia
A floating dock is a type of pontoon for dry docking ships, possessing floodable buoyancy chambers. The Floating docks have more advantages than the other type of ship docking for maintenance. The purpose of the research study is to design and calculate of spud housing construction for floating dock. The spud housing is used to keep of floating dock in the safe condition. Mild steel material is used to construction of spud housing with yield point 235 x 106 N/m2. Design calculations were done by finite element analysis (FEA). The minimum stress is 1042.36 N/m2 and minimum deflection is 0.447 mm. The maximum stress is 0.142 x 109 N/m2 and maximum deflection is 4.019 mm. The maximum stress is not more than yield point of material.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.