EDPS Account

Volume 144 (2018)

Free Access to the whole issue

MATEC Web of Conferences

Volume 144 (2018)

International Conference on Research in Mechanical Engineering Sciences (RiMES 2017)

Manipal, Karnataka, India, December 21-23, 2017
P.B. Raghuvir and T.M. Mathew (Eds.)

Export the citation of the selected articles Export
Select all

Open Access

Statement of Peer review

Published online: 09 January 2018

PDF (47.8 KB)

Open Access

Preface 00001

Dr. G. S. Vijay, Dr. M. C. Gowrishanker and Prof. Y. Nayak. Suhas

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814400001

Machine Design

Open Access

Computational study on the effect of a conical spring on handling of buses at low speed 01001

Aravind Rajagopalan and Hariharan Sankara Subramanian

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814401001

Open Access

Theoretical analysis of steady state operating forces in control valves 01002

Hubballi Basavaraj and Sondur Vilas

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814401002

Open Access

Evaluation of brake parameters in copper discs of various thicknesses and speeds using Neodymium – Iron – Boron Magnets 01003

G. L. Anantha Krishna and K. M. Sathish Kumar

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814401003

Open Access

Conceptual design of planetary gearbox system for constant generator speed in hydro power plant 01004

Bhargav, M. A. Parameshwaran, S. Sivaraj and Nithin Venkataram

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814401004

Open Access

Numerical simulation of time-invariant error and its effect on planetary gearbox dynamics 01005

Nithin Venkataram, Rahul M. Cadambi and Arun R. Rao

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814401005

Open Access

Analysis of various parameters affecting weir design and fabrication of Weirs: An Overview 01006

B. Rao Vanishree and R. Manjula

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814401006

Open Access

Experimental investigation of torsional vibration isolation using Magneto Rheological Elastomer 01007

K Praveen Shenoy, Abhishek Kumar Singh, K Sai Aditya Raman and K. V. Gangadharan

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814401007

Open Access

Solid Modelling Interaction with Sensors for Virtual Reality Welding 01008

V. G. Bharath and Rajashekar Patil

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814401008

Open Access

Comparative structural vibration analysis of machinery and GFRP with Al7075 01009

K. Vinoth Kumar, T. G. Loganathan, A. Bharath, B. Shyam Sundar and K. K. Abishek

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814401009

Open Access

Finite element simulation of low velocity impact loading on a sandwich composite 01010

M. Vishwas, Sharnappa Joladarashi and Satyabodh M. Kulkarni

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814401010

Open Access

A Mathematical Model to Estimate the Position of Mobile Robot by Sensing Caster Wheel Motion 01011

Jnana H. Amarendra, Robins Mathew and Somashekhar S. Hiremath

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814401011

Open Access

Modified bug-1 algorithm based strategy for obstacle avoidance in multi robot system 01012

Jom J. Kandathil, Robins Mathew and Somashekhar S. Hiremath

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814401012

Open Access

Foraging behavior analysis of swarm robotics system 01013

E. Sakthivelmurugan, G. Senthilkumar, K. G. Prithiviraj and K. R. Tinu Devraj

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814401013

Open Access

Design and Analysis of Split Fixture for Gear Hobbing Machine 01014

Prajwal Shenoy, Naik Nithesh, Manjunath Shettar, Debarghya and Wasim Abbas

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814401014

Open Access

Power loss analysis in altered tooth-sum spur gearing 01015

H. K. Sachidananda, K. Raghunandana and B. Shivamurthy

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814401015

Open Access

Rational designing of the internal water supply system in reconstructed residential buildings of mass standard series 01016

Evgeny Orlov

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814401016

Open Access

Automated software for hydraulic simulation of pipeline operation 01017

Roman Hurgin

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814401017

Open Access

A new approach to hydraulic calculations of free-flow drainage systems 01018

Elena Kitaytseva

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814401018

Open Access

Determination of the cavity mode in the water 01019

Pavel Vikulin and Vera Vikulina

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814401019

Open Access

Hemodynamics of Idealized Carotid Artery 01020

Chaitanya Puritipati, Varun Keri and Nitesh Kumar

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814401020

Open Access

Vibration based condition monitoring of rotating machinery 01021

Goutam Senapaty and U. Sathish Rao

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814401021

Open Access

Topological and fractal aspects of the main hydraulic parameters 01022

Anton Lyapin and Valery Lyapin

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814401022

Open Access

Wastewater diffusive dilution and sedimentation of the fine contaminated particles for nonuniform flow in open channels 01023

Anton Lyapin and Valery Lyapin

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814401023

Open Access

Haemodynamic study of Flow in concentric and eccentric stenosed carotid Artery 01024

S. M. Abdul Khader, Raghuvir Pai, Ganesh Kamath, Mohammed Zuber and V. R. K. Rao

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814401024

Materials Science and Engineering

Open Access

Fabrication of samarium strontium aluminate ceramic and deposition of thermal barrier coatings by air plasma spray process 02001

T Baskaran and Shashi Bhushan Arya

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814402001

Open Access

Experimental Studies on SiC and Rice Husk Ash Reinforced Al Alloy Composite 02002

Y. M. Shivaprakash, Anunoy Sarkar, Sunit Jha, Muktesh Singh and Shachin Bangera

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814402002

Open Access

Effect of retrogression and re-ageing heat treatment on microstructure and microhardness of aluminium 7010 alloy 02003

M. S. Nandana, K. Udaya Bhat and C. M. Manjunatha

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814402003

Open Access

A study of influence of material properties on magnetic flux density induced in magneto rheological damper through finite element analysis 02004

T. M. Gurubasavaraju, Kumar Hemantha and Mahalingam Arun

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814402004

Open Access

Effect of SiC Nano powder on Multiaxial Woven and Chopped Randomly Oriented Flax/Sisal Fiber Reinforced composites 02005

Ganesh R. Kalagi, Rajashekar Patil, Sunil Kumar Shetty and Madhukara Nayak

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814402005

Open Access

Study on Electrical Properties of PALF Reinforced Bisphenol-A Composite 02006

B. Vinod and L. J. Sudev

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814402006

Open Access

Mechanical characterization of precipitation hardened Al7075-grey cast iron powder reinforced metal matrix composites 02007

Jamaluddin Hindi, Kini Achuta and Murthy Amar

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814402007

Open Access

Study on Spheroidization and Related Heat Treatments of Medium Carbon Alloy Steels 02008

S. R. Harisha, Sathyashankara Sharma, U. Achutha Kini and M. C. Gowri Shankar

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814402008

Open Access

Experimental and numerical investigation of mode II failure behavior evaluation using three point bend, end notched flexure test 02009

R. Nikhil, S. Shivakumar, Kallol Anupama and Shettar Manjunath

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814402009

Open Access

Sliding wear studies of microwave clad versus unclad surface of stainless steel 304 02010

M. K. Akshata, Ajit M. Hebbale and M. S. Srinath

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814402010

Open Access

Influence of post curing on GFRP hybrid composite 02011

Vithal Rao Chavan, K. R. Dinesh, K. Veeresh, Veerabhadrappa Algur and Manjunath Shettar

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814402011

Open Access

Study on fracture behaviour of Hybrid Aluminium Composite 02012

D. B. Niranjan, G. S. Shiva Shankar and Latha B. Shankar

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814402012

Open Access

Microstructure and wear behavior of austempered high carbon high silicon steel 02013

Palaksha Acharya, Ajit Kumar and Ravishankar Bhat

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814402013

Open Access

Mechanical Characterization and Finite Element Analysis of Jute-Epoxy Composite 02014

Rajole Sangamesh, Naveen Kumar, K. S. Ravishankar and S. M. Kulkarni

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814402014

Open Access

Investigation of tensile properties of RTV Silicone based Isotropic Magnetorheological Elastomers. 02015

Bhaktha Sandesh, Hegde Sriharsha, U. Rao Sathish and Gandhi Nikhil

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814402015

Open Access

Case study on water based cellulose couplant in contact type ultrasonic testing 02016

B. Shivamurthy, Krishnamurthy and H. K. Sachidanada

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814402016

Open Access

Hydraulic characteristics of internal protective coatings used for rehabilitation of pipelines of water supply and sanitation systems 02017

Vladimir Orlov

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814402017

Open Access

Sedimentation of suspended solids in ultrasound field 02018

Vera Vikulina and Pavel Vikulin

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814402018

Open Access

A Study on Tensile and Shear behaviour of Untreated and Cryogenically Treated Al-SiC and Al-Gr Metal Matrix Composite 02019

K. N. Arunkumar, G. B. Krishnappa and Mohammed Salman Pasha

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814402019

Open Access

A Study on Hardness and Wear behaviour of Untreated and Cryogenically Treated Al-SiC and Al-Gr Metal Matrix Composite 02020

G. B. Krishnappa, K. N. Arunkumar and Mohammed Salman Pasha

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814402020

Open Access

A Review on Removal of Heavy Metal Ions from Waste Water using Natural/ Modified Bentonite 02021

Prathiksha P. Prabhu and Balakrishna Prabhu

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814402021

Open Access

A Review on Adsorption of Cationic Dyes using Activated Carbon 02022

Nikita Chrishel Corda and M. Srinivas Kini

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814402022

Open Access

Current Status of Methods Used In Degradation of Polymers: A Review 02023

Aishwarya Kulkarni and Harshini Dasari

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814402023

Open Access

Influence of Sawdust Bio-filler on the Tensile, Flexural, and Impact Properties of Mangifera Indica Leaf Stalk Fibre Reinforced Polyester Composites 02024

Srinivas Shenoy Heckadka, Suhas Yeshwant Nayak, P. V. Gouthaman, Abhishek Talwar, V. A. Ravishankar, Linto George Thomas and Ankur Mathur

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814402024

Open Access

Tensile and Flexural Properties of Chopped Strand E-glass Fibre Mat Reinforced CNSL-Epoxy Composites. 02025

Suhas Yeshwant Nayak, Srinivas Shenoy Heckadka, Linto George Thomas and Anil Baby

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814402025

Open Access

Hygrothermal Studies on GFRP Composites: A Review 02026

Manjunath Shettar, Aakarshit Chaudhary, Zaid Hussain, U. Achutha Kini and Sathyashankara Sharma

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814402026

Open Access

Influence of plasma modification on mechanical and thermal properties of Polypropylene/ Nano-Calcium Silicate Composites 02027

G Ajeesh., Aditya Raman, Adarsh Parameswaran, Sundhara Pandiyan, S. Parvathy and Philip George

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814402027

Manufacturing Engineering

Open Access

Machinability study of Al-TiC metal matrix composite 03001

P. N. Siddappa, B. P. Shivakumar, K. B. Yogesha, M. Mruthunjaya and M. B. Hanamantraygouda

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814403001

Open Access

Friction stir welding of Aluminium matrix composites – A Review 03002

Prabhu Subramanya, Murthy Amar, Shettigar Arun, Herbert Mervin and Rao Shrikantha

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814403002

Open Access

Performance improvement studies for cutting tools with perforated surface in turning of titanium alloy 03003

Rao Charitha, Rao Shrikantha and Herbert Mervin

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814403003

Open Access

Cryogenic Deflashing for Rubber Products 03004

M. Abhilash, G. V. Naveen Prakash and S. Kasthurirengan

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814403004

Open Access

Optimize the Rolling Process Parameters for Material AA1100 using Metal Forming Simulation 03005

T. S. Hemanth, Y. Arunkumar and M. S. Srinath.

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814403005

Open Access

Surface roughness optimization in machining of AZ31 magnesium alloy using ABC algorithm 03006

Abhijith, Pai Srinivasa, D’Mello Grynal and Hebbar Gautama

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814403006

Open Access

Study of mould hardness for alpha set type resin bonded moulding sand system using Taguchi approach for metal casting applications 03007

Deshpande Anand, Gharge Aishwarya, Deshpande Pratik, Patil Pratik, Vaidya Tejashree and Chate Ganesh

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814403007

Open Access

Vision system in quality control automation 03008

Ravi Kiran, H. J. Amarendra and Shashank Lingappa

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814403008

Open Access

The effect of Process Parameters on Material Removal Rate in Drilling of Al 6061-SiC composite 03009

D. Deepak and B. Rajendra

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814403009

Thermal Sciences

Open Access

Effect of variable thermal conductivity on entropy generation in a plate with internal energy generation 04001

T. K. Favas and G. Jilani

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814404001

Open Access

Design and Simulation of a Vapour Compression Refrigeration System Using Phase Change Material 04002

Raju Siddharth, Korody Jagannath, P. Kini Giridhar and K. Kedlaya Vishnumurthy

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814404002

Open Access

Thermoacoustic Refrigerator for High Temperature Gradient 04003

Abhishek Mishra, Ankur Kumar Choudhary, Taniya Tomar and Jagannath Korody

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814404003

Open Access

Performance analysis of PV panel under varying surface temperature 04004

Tripathi Abhishek Kumar, Ch. S. N Murthy and Aruna Mangalpady

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814404004

Open Access

Performance Testing of Diesel Engine using Cardanol-Kerosene oil blend 04005

Ravindra, M Aruna and Vardhan Harsha

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814404005

Open Access

Development of Powerhouse Using Fresnel lens 04006

Nawar Saif Al-Dohani, S. Nayak Nagaraj, A. Anarghya and V. N. Abhishek

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814404006

Open Access

Performance computation of window air conditioner with very low GWP near azeotropic refrigerant mixtures as a drop in Substitutes to R22 04007

Shaik Sharmas Vali, Talanki Puttaranga Setty and Ashok Babu

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814404007

Open Access

Effect of Various External Shading Devices on Windows for Minimum Heat Gain and Adequate Day lighting into Buildings of Hot and Dry Climatic Zone in India 04008

Gorantla Kirankumar, Shaik Saboor, Putta Ranga Talanki Setty and Ashok Babu

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814404008

Open Access

Analytical computation of thermodynamic performance parameters of actual vapour compression refrigeration system with R22, R32, R134a, R152a, R290 and R1270 04009

Shaik Sharmas Vali, Talanki Puttaranga Setty and Ashok Babu

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814404009

Open Access

Experimental and numerical investigation of heat dissipation from an electronic component in a closed enclosure 04010

Bobin Saji George, M. Ajmal, S. R. Deepu, M. Aswin, D. Ribin and J. Akhil

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814404010

Open Access

Solar assisted liquid desiccant cooling using clay based membranes 04011

S. Shanmuga Priya, Sneha Reddy, Priyadarshini Balachandar and Sanober Wadhwania

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814404011

Open Access

Numerical Analysis of Heat transfer Enhancement in a double pipe heat exchanger with a holed twisted tape 04012

Akarsh Kumar, Ujjawal Sureka and Shiva Kumar

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814404012

Open Access

Principles of energy saving in water supply and sewage systems 04013

Nikolay Makisha and Tatiana Kazimirova

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814404013

Open Access

Information modeling of windows with the account of thermophysical characteristics 04014

Elena Ignatova

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814404014

Open Access

Augmentation of Effective Thermal Gain of Solar Air Heater using a Novel Turbulator Design- A CFD Study 04015

Animesh Dhagat and M. S. Manjunath

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814404015

Open Access

Production of biogas at wastewater treatment plants and its further application 04016

Nikolay Makisha and Daria Semenova

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814404016

Open Access

Effect of bio-ethanol on the performance and emission of a biodiesel fueled compression ignition engine 04017

Shrivathsa Nelly Bhat, Shreyas Shenoy and P. Dinesha

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814404017

Open Access

Vortex dynamics and elliptical structure wake interaction in the proximity of wall using 2-D RANS simulation 04018

H. S. Arunkumar, Chidanand Mangrulkar and Trushar Gohil

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814404018

Open Access

Combined Natural Convection and Surface Radiation Inside Vented Triangular Enclosure - An Experimental Study 04019

Rahul Raj, K. C. Pradyumna, B. R. Rakshith, R. B. Nithin and S. R. Karthik

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814404019

Open Access

Lithium-Ion Battery Management System: A Lifecycle Evaluation Model for the Use in the Development of Electric Vehicles 04020

Ayush Sisodia and Jonathan Monteiro

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814404020

Open Access

Energy-saving measures in buildings considered as monuments of history and architecture 04021

Alexey Kochev, Mikhail Sokolov, Elena Kocheva, Anna Malysheva and Anna Moskaeva

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814404021

Open Access

Ways of heat losses reduction in the structural elements of unique buildings 04022

Alexey Kochev, Kirill Lushin, Mikhail Sokolov, Elena Kocheva and Marina Kocheva

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814404022

Open Access

Fabrication and performance analysis of concentrated hybrid photovoltaic system 04023

Krishna Murthy, Ajay Daniel, Lanvin Concessao, Habbie Alex Roy and A. Ganesha

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814404023

Engineering Management

Open Access

Reliability Assessment and Study of Quality Control Tools on Intermixer and Dump Mill of a Tyre Manufacturing Industry 05001

M. Prashanth Pai, C. G. Ramachandra, T. R. Srinivas and M. J. Raghavendra

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814405001

Open Access

Success of manufacturing industries – Role of Six Sigma 05002

N. Venkatesh and C. Sumangala

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814405002

Open Access

Study of a supply chain system with the presence of bullwhip effect 05003

Ayush Shrivastava, Raghavendra Kamath, Himanshu Sharma and Ajitesh Gogoi

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814405003

Open Access

Implementation of total productive maintenance (TPM) to increase overall equipment efficiency of an hotel industry 05004

B. Manjunatha, T. R. Srinivas and C. G. Ramachandra

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814405004

Open Access

A Study on Lean Manufacturing Practice Carried Out for Axle Housing Plant 05005

J. P. Rishi, Abhishek, T. R. Srinivas and C. G. Ramachandra

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814405005

Open Access

Evaluation of Manufacturing Process Performance by CONWIP Hybridization of Pull Controlled Production Systems 05006

O. Srikanth, A. V. Sita Rama Raju and B. V. Ramana Murty

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814405006

Open Access

Solutions for the disposal of industrial and rain wastewater of transport enterprises in Moscow 05007

Galina Varyushina

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814405007

Open Access

Environmental situation of Baikal Lake 05008

Varvara Shmalko and Elena Gogina

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814405008

Open Access

Root cause analysis of rough conical seat grinding problem in fuel pump cylinder head by Shainin methodology 05009

Sanket Shankar Kadam, N. M. Virupakshappa and U. Achutha Kini

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814405009

Open Access

Influence of Farmer demographics and Supply Chain Issues on Organized Retailer Performance 05010

Aruna Prabhu, B. Giridhar Kamath, A. Karthik and Kushagra Sinha

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814405010

Open Access

The Effect of Lean Techniques on Elimination of Waste in Composite Panel Production Using Paired t-test 05011

Pavan Hiremath, S. Narayanan and Manjunath Shettar

Published online: 09 January 2018

DOI: https://doi.org/10.1051/matecconf/201814405011