Power loss analysis in altered tooth-sum spur gearing

H. K. Sachidananda; K. Raghunandana; B. Shivamurthy

doi:10.1051/matecconf/201814401015

All issues

Volume 144 (2018)

MATEC Web Conf., 144 (2018) 01015

References

Open Access

Issue		MATEC Web Conf. Volume 144, 2018 International Conference on Research in Mechanical Engineering Sciences (RiMES 2017)


Article Number		01015
Number of page(s)		15
Section		Machine Design
DOI		https://doi.org/10.1051/matecconf/201814401015
Published online		09 January 2018

Fakher, Chaari., Manel, ben, Romdhane., Walid, baccar., Taher, fakhfakh., and Mohamed, haddar., Windage power loss in spur gear sets, Wseas transactions on applied and theoretical mechanics, 7(2), 159-168, (2010). [Google Scholar]
Satya, Seetharaman., and Ahmet, Kahraman., A windage power loss model for spur gears, Tribology transactions, Society of tribology and lubrication engineers, Taylor and Francis, 54(4), 473-484, (2010). [Google Scholar]
Wang, B., Lu, Z., J, Chen, X. B., Wang, P., Luo, W., and Xu, h., Modelling and analysis of dynamic efficiency of manual transmission/reducer, Intl. J. of Auto. Tech. 16(3), 417-426, (2015). [CrossRef] [Google Scholar]
James, Kuria., and John, Kihiu., Prediction of overall efficiency in multistage gear train, World academy of science, Engg and Tech, 5(2), 50-56, (2011). [Google Scholar]
Chakrit, yenti., surin, phongsupasamit., and chanat, ratanasumawong., Analytical and experimental investigation of parameters affecting sliding loss in a spur gear pair, Engg J. 17(1), 79-93, (2013). [Google Scholar]
Franco, Concli., and Carlo, Gorla., Analysis of the oil squeezing power losses of a spur gear pair by mean of CFD simulations. Proceedings of the 11th biennial conference on engineering systems design and analysis, ESDA2012, July 2-4, Nantes, France, 1-8, (2012). [Google Scholar]
Miguel, Pleguezuelos., Jose, I, Pedrero., and Miryam, B, Sanchez., Analytical expressions of the efficiency of standard and high contact ratio involute spur gears, Mathematical problems in engineering, Hindawi Publishing Corporation, 1-14, (2013). [Google Scholar]
Chang, l., yeau-ren, jeng., and pay-yau, huan., Modeling and analysis of the meshing losses of involute spur gears in high speed and high load conditions, J. of Tribo., ASME, 135(1), 1-11, (2013). [CrossRef] [Google Scholar]
Vijay, Kumar, Karma., and Ram, Kumar., Comparison between experimental and theoretical investigation of power losses of single stage gear system, Engg, Indian J. of research, 2(8), 107-110, (2013). [Google Scholar]
Chaari, F., Kantchev, G., and Haddar, M., Modelling the mechanical efficiency of a spur gear system, proceedings of the ICE-Engineering and computational mechanics, 163(2), 83-90, (2010). [Google Scholar]
Abdelilah, Lasr., Lahcen, Belfal., Brahim, Najji., and Bernard, Mushirabwoba., Pressure estimation of the trapped and squeezed oil between teeth spaces of spur gears, Applied mathematical sciences, 8(107), 5317-5328 (2014). [CrossRef] [Google Scholar]
Fernandes, C, M, C, G., Marques, P, M, T., Martins, R, C., and Seabra, J, H, O., (2015). Influence of gear loss factor on the power loss prediction, Mechanical sciences, 6 (2015), 81-88 (2015). [CrossRef] [Google Scholar]
Luis, Magalhaes., Ramiro, martins., Cristiano, Locateli., and Jorge, Seabra., (2010). Influence of tooth profile and oil formulation on gear power loss, Tri. Intl, 43(10), 1861-1871. [CrossRef] [Google Scholar]
Petra, Heingartner., and David, Mba., Determining power losses in helical gear mesh, Gear technology, 33-37, (2005). [Google Scholar]
Anderson, N, E., and S, H,Loewenthal., Spur gear system efficiency at part and full load, Technical report 79-46, NASA technical paper 1622 (1980). [Google Scholar]
Hutchings, I. M., Tribology: friction and wear of engineering materials, Ed. Butterworth-Heinemann, oxford, 58-76, (1992). [Google Scholar]
Krishnakumari, A., Elaya, perumal, A., and Panda, R. C., Prediction for condition monitoring of wear and film thickness in a gear box, Engg. Mechanics, 19(6), 393-405, (2012). [Google Scholar]
Muraro, M. A., Koda, F., Reisdorfer, Jr, U., and silva, C. H. D., The influence of contact stress distribution and specific film thickness on the wear of spur gears during pitting tests. J. of Brazilian soc. of mech. sciences and Engg, 34(2), 135-144, (2012). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.

[1] Fakher, Chaari., Manel, ben, Romdhane., Walid, baccar., Taher, fakhfakh., and Mohamed, haddar., Windage power loss in spur gear sets, Wseas transactions on applied and theoretical mechanics, 7(2), 159-168, (2010). [Google Scholar]

[2] Satya, Seetharaman., and Ahmet, Kahraman., A windage power loss model for spur gears, Tribology transactions, Society of tribology and lubrication engineers, Taylor and Francis, 54(4), 473-484, (2010). [Google Scholar]

[3] Wang, B., Lu, Z., J, Chen, X. B., Wang, P., Luo, W., and Xu, h., Modelling and analysis of dynamic efficiency of manual transmission/reducer, Intl. J. of Auto. Tech. 16(3), 417-426, (2015). [CrossRef] [Google Scholar]

[4] James, Kuria., and John, Kihiu., Prediction of overall efficiency in multistage gear train, World academy of science, Engg and Tech, 5(2), 50-56, (2011). [Google Scholar]

[5] Chakrit, yenti., surin, phongsupasamit., and chanat, ratanasumawong., Analytical and experimental investigation of parameters affecting sliding loss in a spur gear pair, Engg J. 17(1), 79-93, (2013). [Google Scholar]

[6] Franco, Concli., and Carlo, Gorla., Analysis of the oil squeezing power losses of a spur gear pair by mean of CFD simulations. Proceedings of the 11th biennial conference on engineering systems design and analysis, ESDA2012, July 2-4, Nantes, France, 1-8, (2012). [Google Scholar]

[7] Miguel, Pleguezuelos., Jose, I, Pedrero., and Miryam, B, Sanchez., Analytical expressions of the efficiency of standard and high contact ratio involute spur gears, Mathematical problems in engineering, Hindawi Publishing Corporation, 1-14, (2013). [Google Scholar]

[8] Chang, l., yeau-ren, jeng., and pay-yau, huan., Modeling and analysis of the meshing losses of involute spur gears in high speed and high load conditions, J. of Tribo., ASME, 135(1), 1-11, (2013). [CrossRef] [Google Scholar]

[9] Vijay, Kumar, Karma., and Ram, Kumar., Comparison between experimental and theoretical investigation of power losses of single stage gear system, Engg, Indian J. of research, 2(8), 107-110, (2013). [Google Scholar]

[10] Chaari, F., Kantchev, G., and Haddar, M., Modelling the mechanical efficiency of a spur gear system, proceedings of the ICE-Engineering and computational mechanics, 163(2), 83-90, (2010). [Google Scholar]

[11] Abdelilah, Lasr., Lahcen, Belfal., Brahim, Najji., and Bernard, Mushirabwoba., Pressure estimation of the trapped and squeezed oil between teeth spaces of spur gears, Applied mathematical sciences, 8(107), 5317-5328 (2014). [CrossRef] [Google Scholar]

[12] Fernandes, C, M, C, G., Marques, P, M, T., Martins, R, C., and Seabra, J, H, O., (2015). Influence of gear loss factor on the power loss prediction, Mechanical sciences, 6 (2015), 81-88 (2015). [CrossRef] [Google Scholar]

[13] Luis, Magalhaes., Ramiro, martins., Cristiano, Locateli., and Jorge, Seabra., (2010). Influence of tooth profile and oil formulation on gear power loss, Tri. Intl, 43(10), 1861-1871. [CrossRef] [Google Scholar]

[14] Petra, Heingartner., and David, Mba., Determining power losses in helical gear mesh, Gear technology, 33-37, (2005). [Google Scholar]

[15] Anderson, N, E., and S, H,Loewenthal., Spur gear system efficiency at part and full load, Technical report 79-46, NASA technical paper 1622 (1980). [Google Scholar]

[16] Hutchings, I. M., Tribology: friction and wear of engineering materials, Ed. Butterworth-Heinemann, oxford, 58-76, (1992). [Google Scholar]

[17] Krishnakumari, A., Elaya, perumal, A., and Panda, R. C., Prediction for condition monitoring of wear and film thickness in a gear box, Engg. Mechanics, 19(6), 393-405, (2012). [Google Scholar]

[18] Muraro, M. A., Koda, F., Reisdorfer, Jr, U., and silva, C. H. D., The influence of contact stress distribution and specific film thickness on the wear of spur gears during pitting tests. J. of Brazilian soc. of mech. sciences and Engg, 34(2), 135-144, (2012). [CrossRef] [Google Scholar]