| Issue |
MATEC Web Conf.
Volume 144, 2018
International Conference on Research in Mechanical Engineering Sciences (RiMES 2017)
|
|
|---|---|---|
| Article Number | 03009 | |
| Number of page(s) | 8 | |
| Section | Manufacturing Engineering | |
| DOI | https://doi.org/10.1051/matecconf/201814403009 | |
| Published online | 09 January 2018 | |
The effect of Process Parameters on Material Removal Rate in Drilling of Al 6061-SiC composite
1
Department of Mechanical and Manufacturing Engineering, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal – Karnataka - 576104, INDIA
2
Centre for Applied Sciences, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal – Karnataka - 576104, INDIA
* Corresponding author: raj.beedu@manipal.edu
This study investigates the effect of process parameters such as diameter of drill, cutting velocity, feed rate and coolant supply on material removal rate while drilling of Al-SiC composite. Sample specimens are prepared by stir-casting method and experiments are designed using Taguchi’s L9 orthogonal array. Response data is analysed using S/N ratio and significant process parameters are identified using Analysis of Variance (ANOVA). Study shows that drill diameter, followed by feed rate are found to be the most significant factors which influence MRR.
Key words: Taguchi method / ANOVA / S/N ratio / Al6061-SiC
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.