Open Access
Issue
MATEC Web Conf.
Volume 144, 2018
International Conference on Research in Mechanical Engineering Sciences (RiMES 2017)
Article Number 02025
Number of page(s) 8
Section Materials Science and Engineering
DOI https://doi.org/10.1051/matecconf/201814402025
Published online 09 January 2018
  1. Suresha, B., Chandramohan, G. and Renukappa, N. M., “Mechanical and tribological properties of glass–epoxy composites with and without graphite particulate filler”. J APPL POLYM SCI, 103(4), pp.2472-2480. (2007) [CrossRef] [Google Scholar]
  2. Mallick, P. K., “Fiber-reinforced composites: materials, manufacturing, and design”. CRC press. (2007) [Google Scholar]
  3. Dadfar, M. R. and Ghadami, F., “Effect of rubber modification on fracture toughness properties of glass reinforced hot cured epoxy composites”. Mater. Des, 47, pp.16-20. (2013) [CrossRef] [Google Scholar]
  4. Sathishkumar, T. P., Satheeshkumar, S. and Naveen, J., 2014. “Glass fiber-reinforced polymer composites–a review”. J REINF PLAST COMP, 33(13), pp.1258-1275.(2013) [CrossRef] [Google Scholar]
  5. Nayak, S. Y., Heckadka, S. S., Sadanand, R. V., Bharadwaj, K., Pokharna, H. M. and Sanjeev, A. R.,“2D woven/3D orthogonal woven Non-crimp E-glass Fabric as Reinforcement in Epoxy Composites using Vacuum Assisted Resin Infusion Molding”. J ENG FIBER FABR, 12(2), pp.12-19.(2017) [Google Scholar]
  6. Tungjitpornkull, S., Chaochanchaikul, K. and Sombatsompop, N., “Mechanical characterization of E-chopped strand glass fibre reinforced wood/PVC composites”. J THERMOPLAST COMPOS, 20(6), pp.535-550.(2007) [CrossRef] [Google Scholar]
  7. Gupta, K., and Siddhartha, “Mechanical and abrasive wear characterization of bidirectional and chopped E-glass fibre reinforced composite materials”. Mater. Des, 35, pp.467-479.(2012) [CrossRef] [Google Scholar]
  8. Bhaskar, V. V. and Srinivas, K., “Mechanical characterization of glass fiber (woven roving/chopped strand mat E-glass fibre) reinforced polyester composites”. AIP CONF PROC, 1859, No. 1, p. 020108. AIP Publishing.(2017) [CrossRef] [Google Scholar]
  9. Khan, R. A., Khan, M. A., Zaman, H. U., Pervin, S., Khan, N., Sultana, S., Saha, M. and Mustafa, A. I., “Comparative studies of mechanical and interfacial properties between jute and E-glass fibre-reinforced polypropylene composites”. J REINF PLAST COMP, 29(7), pp.1078-1088.(2010) [CrossRef] [Google Scholar]
  10. Shivamurthy, B., Bhat, K. U. and Anandhan, S., “Mechanical and sliding wear properties of multi-layered laminates from glass fabric/graphite/epoxy composites”. Mater. Des, 44, pp.136-143.2013 [CrossRef] [Google Scholar]
  11. Hameed, N., Sreekumar, P. A., Francis, B., Yang, W. and Thomas, S., “Morphology, dynamic mechanical and thermal studies on poly (styrene-co-acrylonitrile) modified epoxy resin/glass fibre composites”. Compos Part A Appl Sci Manuf., 38(12), pp.2422-2432.(2007) [CrossRef] [Google Scholar]
  12. Muhammad, Y. H. and Ahmad, S., “Mechanical and thermal properties of glass fibre-reinforced epoxy composite with matrix modification using liquid epoxidized natural rubber”. J REINF PLAST COMP, 32(9), pp.612-618(2013) [CrossRef] [Google Scholar]
  13. Bisanda, E. T. N. and Ansell, M. P., “Properties of sisal-CNSL composites”. J MATER SCI, 27(6), pp.1690-1700.(1992) [CrossRef] [Google Scholar]
  14. Akinhanmi, T. F., Atasie, V. N. and Akintokun, P. O. “Chemical composition and physicochemical properties of cashew nut (Anacardium occidentale) oil and cashew nut shell liquid”. J AGR FOOD ENVIR SCI, 2(1), pp.1-10.(2008) [Google Scholar]
  15. Telascrêa, M., Leão, A. L., Ferreira, M. Z., Pupo, H. F. D. F., Cherian, B. M. and Narine, S. “Use of a Cashew Nut Shell Liquid Resin as a Potential Replacement for Phenolic Resins in the Preparation of Panels–A Review”. Mol. Cryst. Liq. Cryst., 604(1), pp.222-232. (2014) [CrossRef] [Google Scholar]
  16. Kim, S. “The reduction of formaldehyde and VOCs emission from wood-based flooring by green adhesive using cashew nut shell liquid (CNSL)”. J HAZARD MATER, 182(1), pp.919-922.(2010) [CrossRef] [Google Scholar]
  17. Priya, S. P., Ramakrishna, H. V., Rai, S. K. and Rajulu, A. V. “Studies on tensile properties and chemical resistance of glass mat-epoxy toughened with epoxy phenol CNSL composites”. J REINF PLAST COMP, 25(2), pp.141-147.(2006) [CrossRef] [Google Scholar]
  18. Lubi, M. C. and Thachil, E. T. “Cashew nut shell liquid (CNSL)-a versatile monomer for polymer synthesis”. Des. Monomers Polym., 3(2), pp.123-153.(2000) [CrossRef] [Google Scholar]
  19. Heckadka, S. S., Nayak, S. Y., Narang, K. and Vardhan Pant, K. “Chopped Strand/Plain Weave E-Glass as Reinforcement in Vacuum Bagged Epoxy Composites”. J MATER, 2015, (2015) [Google Scholar]
  20. ASTM D3039 / D3039M-14, Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials, ASTM International, West Conshohocken, PA, 2014, www.astm.org [Google Scholar]
  21. ASTM D7264 / D7264M-07, Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials, ASTM International, West Conshohocken, PA, 2007, www.astm.org [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.