| Issue |
MATEC Web Conf.
Volume 144, 2018
International Conference on Research in Mechanical Engineering Sciences (RiMES 2017)
|
|
|---|---|---|
| Article Number | 03005 | |
| Number of page(s) | 10 | |
| Section | Manufacturing Engineering | |
| DOI | https://doi.org/10.1051/matecconf/201814403005 | |
| Published online | 09 January 2018 | |
Optimize the Rolling Process Parameters for Material AA1100 using Metal Forming Simulation
Affiliated to Visvesvaraya Technological University, Belagavi, Department of Industrial and Production Engineering, Malnad College of Engineering, Hassan, Karnataka, India
* Corresponding author: hemanththulasi@gmail.com
Metal forming plays a very important role in the manufacturing. Simulation of manufacturing process aids in the improvement of quality, reduce energy and resource consumption and helps in visualization of the process. The design of experiment helps in optimization of the parameters in any processes. In this paper, Taguchi optimization technique is used to predict the best results for the given inputs such as roller diameter, friction value, velocity of the rollers and percentage reduction to the forming process and get the optimized values for spread, hardness, effective stress, power required, strain rate and torque using the manufacturing simulation software. It is found that the important parameter is percentage reduction affecting the effective stress. Optimal parameters with desirability value of 0.87 have been obtained.
Key words: Metal Rolling / DOE / AFDEX / Optimization / Aluminum
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.