MATEC Web of Conferences

Open Access

Statement of Peer review

Published online: 10 October 2018

PDF (53.4 KB)

Open Access

Message from the Organizers 00001

Nuno Maia and Zuzana Dimitrovová

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821100001

PDF (119.0 KB)

Invited Papers

Open Access

This world is full of vibrations 01001

J. S. Rao

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821101001

Open Access

Complex dynamics of drill-strings: Theory and experiments 01002

Marian Wiercigroch, Marcin Kapitaniak, Vahid Vaziri and Krishnan Nandakumar

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821101002

Open Access

Projection methods for stochastic structural dynamics 01003

Sion Eilir Pryse, Sondipon Adhikari and Abhishek Kundu

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821101003

Open Access

An overview of PST for vibration based fault diagnostics in rotating machinery 01004

T. Haj Mohamad and C. Nataraj

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821101004

NC: Nonlinear Dynamics and Control of Engineering Systems; TP1: Non-linear vibrations

Open Access

Geometrically nonlinear free and forced vibrations of Euler-Bernoulli multi-span beams 02001

Hatim Fakhreddine, Ahmed Adri, Saïd Rifai and Rhali Benamar

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821102001

Open Access

Geometrically nonlinear free and forced vibrations analysis of clamped-clamped functionally graded beams with multicracks 02002

Mohcine Chajdi, Ahmed Adri, Khalid El bikri and Rhali Benamar

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821102002

Open Access

Nonlinear free and forced vibration of Euler-Bernoulli beams resting on intermediate flexible supports 02003

Hatim Fakhreddine, Ahmed Adri, Saïd Rifai and Rhali Benamar

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821102003

Open Access

Comparative analysis of strategies for a semi-active suspension of a ¼ vehicle 02004

Matheus Melo and Suzana Avila

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821102004

Open Access

Experimental study of a passive inverted pendulum control system 02005

Diogo V. Resende, Marcus V. G. de Morais and Suzana M. Avila

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821102005

Open Access

Nonlinear damped vibrations of planar discrete systems - numerical and experimental modelling 02006

Peter Pavlov

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821102006

Open Access

Stability of the dynamic shifting process in the vehicle transmission with the input shaper 02007

Alexander Taratorkin, Victor Derzhanskii and Igor Taratorkin

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821102007

Open Access

Dynamic analysis of a parametrically excited golden Muga silk embedded pneumatic artificial muscle 02008

Bhaben Kalita and S. K. Dwivedy

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821102008

Open Access

Theoretical and experimental investigation of parametrically excited piezoelectric energy harvester 02009

Anshul Garg and Santosha K. Dwivedy

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821102009

Open Access

Helical buckling of thin rods: FE modelling 02010

Marcin Kapitaniak, Vahid Vaziri and Marian Wiercigroch

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821102010

Open Access

Identifying route to stall flutter through stochastic bifurcation analysis 02011

Rajagopal V Bethi, Sai Vishal Reddy Gali and J Venkatramani

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821102011

Open Access

Investigating the route to flutter in a pitch-plunge airfoil with freeplay nonlinearity subjected to input flow fluctuations 02012

R Magu Raam Prasaad and J Venkatramani

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821102012

Open Access

Design and identification of tilt-motor quadrotor control system 02013

Mikhail Shavin

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821102013

ND: Nonlinear Dynamics, Chaos and Control of Elastic Structures; TP6: Condition monitoring, tip-timing, experimental techniques

Open Access

Analysis of AE characteristics of tool wear in drilling CFRP/Ti stacked material 03001

Zhan Wang, Sheng Leng, Tao Min and Gang Chen

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821103001

Open Access

On the dynamic buckling of very slender structures to self-weight 03002

Reyolando Brasil, Leandro Orbolato and Eduardo Pádua

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821103002

Open Access

Tip-timing analysis of last stage steam turbine mistuned bladed disc during run-down 03003

Romuald Rzadkowski, Leszek Kubitz, Michał Maziarz, Pawel Troka, Leszek Piechowski and Ryszard Szczepanik

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821103003

Open Access

Experimental evaluation of a vibro-impact model for two adjacent shear-building structures 03004

Marcus Varanis, Arthur Mereles, Anderson Silva, José Balthazar, Ângelo Tusset and Clivaldo Oliveira

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821103004

Open Access

Visualization research on the influence of an ultrasonic degassing system on the operation of a hydraulic gear pump 03005

Piotr Antoniak, Jarosław Stryczek, Michał Banaś, Oleksandr Lyhovskyi, Ihor Gryshko, Andrii Zilinskyi and Vasyl Kovalov

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821103005

Open Access

Vibration of a crane system model equipped with flexible links in the presence of kinematic task-based constraints 03006

Elżbieta Jarzębowska, Andrzej Urbaś and Krzysztof Augustynek

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821103006

Open Access

Diesel engine vibration monitoring based on a statistical model 03007

Suzana Lampreia, José Requeijo and Victor Lobo

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821103007

Open Access

Recurrence analysis of fractional-order Lorenz system 03008

Andrzej Rysak and Magdalena Gregorczyk

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821103008

Open Access

Effect of noise on support vector machine based fault diagnosis of IM using vibration and current signatures 03009

Purushottam Gangsar and Rajiv Tiwari

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821103009

Open Access

Integration of maintenance systems 03010

S H Sarje

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821103010

Open Access

Prediction of cutting tool vibration and surface roughness in hard turning of AISI52100 steel 03011

Nitin Ambhore, Dinesh Kamble and Satish Chinchanikar

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821103011

Open Access

In-plane vibration of rotating rings using a high order theory 03012

Tao Lu, Apostolos Tsouvalas and Andrei Metrikine

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821103012

DS: Dynamic Stability, Deterministic, Chaotic and Random Post-Critical States; TP10: Vibration and waves; TP13: Wave propagation

Open Access

Singular solutions of a non-holonomic system as limits separating solution groups of particular type 04001

Jiří Náprstek and Cyril Fischer

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821104001

Open Access

Special discontinuities in models of continuum mechanics 04002

Anna Chugaynova

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821104002

Open Access

A new simple method for determining the sound absorption coefficient 04003

Merab Chelidze

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821104003

Open Access

Acoustic devices for breathing investigations 04004

Semyon Shkundin and Valentina Rumyantseva

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821104004

Open Access

The acoustic waves propagation in a cylindrical waveguide with the laminar flow 04005

Alexander Petrov and Valentina Rumyantseva

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821104005

Open Access

Free vibrations of circular curved beams 04006

Ajinkya Baxy and Abhijit Sarkar

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821104006

Open Access

Calculation of acoustic flow-rate measurements error with the help of Fermat’s principle 04007

Alexander Petrov and Semyon Shkundin

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821104007

Open Access

Study of finite amplitude capillary waves stability 04008

Alexander Petrov and Mariana Lopushanski

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821104008

EH: Energy Harvesting from Ambient Mechanical Oscillations

Open Access

Vibrational energy harvesting device with magnetic tip mass 05001

Fedor Fedulov and Leonid Fetisov

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821105001

Open Access

A Bayesian updating procedure for the electromechanical properties of piezoelectric energy harvesters 05002

Patricio Peralta, Rafael O. Ruiz and Viviana Meruane

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821105002

Open Access

Energy harvesting from passing train as source of energy for autonomous trackside objects 05003

Zdenek Hadas, Jan Smilek and Ondrej Rubes

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821105003

Open Access

Experimental evaluation of Tusi couple based energy harvester for scavenging power from human motion 05004

Jan Smilek and Zdenek Hadas

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821105004

Open Access

Verified nonlinear model of piezoelectric energy harvester 05005

Ondrej Rubes, Martin Brablc and Zdenek Hadas

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821105005

Open Access

Vibrational tests of a system with two coupled beams and a distributed tip mass 05006

Andrzej Rysak, Euan Rodgers and Grzegorz Litak

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821105006

Open Access

Performance of broadband tristable energy harvesters 05007

Shengxi Zhou, Grzegorz Litak and Junyi Cao

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821105007

Open Access

Analysis of pendulums coupled by torsional springs for energy harvesting 05008

P V Malaji, Suresh Doddi, Michael I. Friswell and Sondipon Adhikari

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821105008

SM: Structural Modifications: Modelling Predictions and Experimental Assessment

Open Access

On reducing uncertainty on the Elliptical Plane modal identification method 06001

Diogo Montalvão, Mihai Dupac, Daerefa-a Mitsheal Amafabia, Opukuro David-West and George Haritos

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821106001

Open Access

Mass-geometric parameters improvement of gearbox by using vibration analysis 06002

Viktoriia Batizi and Dmitriy Likhachev

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821106002

Open Access

An Identification of the unbalanced magnetic pull in generator at excitation and the hydropower machine model validation 06003

Željan Lozina, Damir Sedlar and Ivan Tomac

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821106003

Open Access

Analytical evaluation of the lifetime of a three-axle bogie frame using the analytical model validated through experimental modal analysis 06004

Manea Ion, Sebesan Ioan, Matache Mihai, Prenta Gabriel and Firicel Catalin

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821106004

Open Access

Coupling of structures using frequency response functions 06005

Tiago Silva and João Pereira

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821106005

Open Access

Vibration analysis based on the spectrum kurtosis for adjustment and monitoring of ball bearing radial clearance 06006

Anthimos Georgiadis, Xiaoyun Gong and Nicolas Meier

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821106006

VE: Simulation and/or Virtual Experiments for Vehicle Vibro-Acoustic Response

Open Access

FE sloshing modelling in bidimensional cavity using wave equation 07001

Agnaldo Antônio Moreira T. da Silva and Marcus Vinicius Girão de Morais

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821107001

VS: Vibration Problems in Strongly Nonlinear Mechanical Dissipative Systems

Open Access

Weak fault feature extraction of gear based on KVMD and singular value difference spectrum 08001

Hongkun Li, Chaoge Wang, Mengfan Hou, Rui Yang and Daolong Tang

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821108001

Open Access

Wear depth calculation and influence factor analysis for groove ball bearing 08002

Fengxia Lu, Rupeng Zhu and Qiuju Fu

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821108002

Open Access

A new approximate model of tyre accounting for both deformed state and dry friction forces in the contact spot on the background of the coupled model 08003

Alexey A. Kireenkov, Dmitry V. Nushtaev and Sergey I. Zhavoronok

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821108003

Open Access

Implementation of analytical models of the anisotropic combined dry friction in problems of pneumatics’ dynamics 08004

Alexey Kireenkov and Sergey Zhavoronok

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821108004

BD: Bridge Dynamics

Open Access

Assessment of human-induced vibrations of a cable-stayed footbridge 09001

Izabela Drygała, Joanna M. Dulinska and Marek Wazowski

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821109001

Open Access

Dynamic assessment of a cable-stayed footbridge under earthquake sequence using a concrete damage plasticity model (CDP) 09002

Rafał Ciura, Izabela Drygała and Joanna M. Dulinska

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821109002

Open Access

Seismic performance of a masonry arch viaduct subjected to foreshocks and a mainshock 09003

Izabela J. Drygala, Joanna M. Dulinska, Łukasz Bednarz and Jerzy Jasienko

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821109003

Open Access

Dynamic forces with random amplitudes from rhythmic jumps and squats 09004

Marek Pańtak

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821109004

FV: Lessons in Floor Vibrations: New Design and Retrofit

Open Access

Proposal of new vibro-acoustic floor 10001

Andrzej Kłosak, Alicja Kowalska-Koczwara, Filip Pachla, Krzysztof Stypuła, Tadeusz Tatara and Bogusław Zając

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821110001

Open Access

Vibration analysis of footbridges: an overview of the current practice 10002

Antonio De Luca, Michael Bauer, Marguerite Pinto and Elisabeth Malsch

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821110002

Open Access

Controlling construction-induced vibrations in healthcare facilities 10003

Melissa W.Y. Wong and Michael J. Wesolowsky

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821110003

ML: Vibration of Solids and Structures under Moving Loads

Open Access

On the sloshing effect in half-filled freight trains during braking 11001

Jian Dai, Mengmeng Han, Kok Keng Ang and Minh Thi Tran

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821111001

Open Access

The detection of wave slamming from vibration measurements on a polar supply and research vessel 11002

Anriëtte Bekker, Christof M. van Zijl and Clinton F. W. Saunders

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821111002

Open Access

Dynamic response of a vehicle with flexible car body moving on a ballasted track 11003

Yingjie Wang, Zuzana Dimitrovová and Jong-Dar Yau

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821111003

Open Access

Evaluation of drag and added mass forces acting on vibrating cantilever beams in the air 11004

Artem Nuriev, Airat Kamalutdinov, Olga Zaitseva and Boudkhil Affane

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821111004

Open Access

Semi-analytical approaches to vibrations induced by moving loads 11005

Zuzana Dimitrovová

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821111005

Open Access

Railway track design & degradation 11006

Mehran Sadri, Tao Lu, Arjen Zoeteman and Michaël Steenbergen

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821111006

Open Access

Stochastic load generated by the beam irregularities 11007

Piotr Koziol, Dariusz Kudla and Cristinel Mares

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821111007

Open Access

Dynamic response of double-beam system with nonlinear viscoelastic layer to moving load 11008

Piotr Koziol and Rafał Pilecki

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821111008

Open Access

Wavelet based analysis of truck vibrations during off-road transportation 11009

Martin Vlkovský, Piotr Koziol and Dariusz Grzesica

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821111009

RM: Sustainable Railway Maintenance

Open Access

The study of the interlock of ballast in triaxial geogrids 12001

Diogo Pires, Madalena Barroso, Simona Fontul and Zuzana Dimitrovová

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821112001

Open Access

Railway infrastructures sustainable interventions: Proposal for a Cost-Benefit Analysis application 12002

Paula Couto, Filipa Salvado and Maria João falcão Silva

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821112002

Open Access

Optimization of railway infrastructures rehabilitation based on multicriteria analysis 12003

Paula Couto, Filipa Salvado and Maria João Falcão Silva

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821112003

Open Access

Ballast fouling evaluation with ground penetrating radar 12004

Ana Margarida Marques, Simona Fontul and André Paixão

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821112004

Open Access

Transport infrastructures assessment using multiple GPR configurations and FWD 12005

Vânia Marecos, Simona Fontul, Mercedes Solla and Maria de Lurdes Antunes

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821112005

Open Access

Numerical analysis of geogrid contribution to railway track reinforcement 12006

António Lanca, Zuzana Dimitrovová, Madalena Barroso and Simona Fontul

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821112006

Open Access

Multi-criteria analysis applied to railway rehabilitation 12007

Vasco Caetano, Paula Couto, Simona Fontul and Maria João Falcão Silva

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821112007

RV: Road and Railway Noise and Vibrations: Numerical Modeling and Mitigation; TP9: Vehicle dynamics

Open Access

Vehicle response on kinematic excitation 13001

Veronika Valašková and Jozef Melcer

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821113001

Open Access

Experimental and computational dynamic analysis of the foam concrete as a sub-base layer of the pavement structure 13002

Veronika Valaskova, Jozef Vlcek and Marian Drusa

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821113002

Open Access

Measurement and analysis of truck vibrations during off-road transportation 13003

Dariusz Grzesica

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821113003

Open Access

Fundamental study on countermeasures against subharmonic vibration of order 1/2 in automatic transmissions for cars 13004

Fumiya Takino, Takahiro Ryu, Takashi Nakae, Kenichiro Matsuzaki and Risa Ueno

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821113004

Open Access

Numerical analysis of the shielding effect provided by periodic elastic scatterers 13005

Paulo Amado-Mendes, Luís Godinho, Pedro Alves-Costa, Alexandre Castanheira-Pinto and Carlos Albino

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821113005

Open Access

Effect of adding mass to rotor on in-plane squeal in automotive disc brake 13006

Takashi Nakae, Takahiro Ryu, Hiroki Goto and Daisuke Sato

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821113006

Open Access

Vibrations induced by the passage of trains at various speeds and their effect on the structural response of buildings - an experimental and numerical analysis 13007

Barbara Kożuch, Filip Pachla and Tadeusz Tatara

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821113007

VM: Vibration Evaluation, Control and Mitigation on Civil Engineering Structures

Open Access

Damage estimation on concrete gravity dams through artificial accelerograms 14001

Enrico Zacchei and José Luis Molina

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821114001

Open Access

Estimation of optimal area and volume for double arch-dams 14002

Enrico Zacchei and José Luis Molina

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821114002

Open Access

Seismic vibration control using a novel inerto-elastic damper 14003

Mahdi Abdeddaim, Arnav A. Kasar and Nassim Djedoui

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821114003

Open Access

The effectiveness of polymer adhesive in reduction of vibrations of structural members 14004

Natalia Lasowicz, Arkadiusz Kwiecień and Robert Jankowski

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821114004

Open Access

Limitations of a dynamic shear-frame model based in a small-scale experimental steel structure 14005

Augusto de S. Pippi, Pedro L. Bernardes Júnior, Suzana M. Avila, Marcus V. G. de Morais and Graciela Doz

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821114005

Open Access

A parametric study of a tower controlled by a pendulum tuned mass damper: beam modelling 14006

Gino B. Colherinhas, Maura A. M. Shzu, Suzana M. Avila and Marcus V. G. de Morais

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821114006

Open Access

Identification of vibration properties of a midrise wooden building using subspace identification method 14007

Yuji Miyazu and Takuro Mori

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821114007

Open Access

Semi-active vibration control of high-speed rotor system with electrorheological bearing fluid 14008

Rajasekhara Reddy Mutra and J Srinivas

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821114008

Open Access

No spillover partial eigenvalue assignment in second-order linear systems using the Brauer’s theorem and dense influence matrices 14009

Jessica Motta, Marconi de Almeida, Tito Santos and José Araújo

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821114009

TP2: Fluid structure interaction

Open Access

Analysis of classical flutter in steam turbine blades using reduced order aeroelastic model 15001

Chandra Shekhar Prasad and Luděk Pešek

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821115001

Open Access

Hydrodynamic aspects of moving vehicle with sloshing tanks 15002

Mengmeng Han, Jian Dai and Kok Keng Ang

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821115002

Open Access

Frequency response of a liquid sloshing in a rotating, laterally oscillating, cylindrical vessel 15003

Eisaku Yokose, Yusuke Saito and Tatsuo Sawada

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821115003

Open Access

Ellipsoid movement in ideal or viscous fluid 15004

Alexander Petrov and Mariana Lopushanski

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821115004

TP3: Vibration in energy and power systems

Open Access

Experimental study in reduction of two phase flow induced vibration 16001

Ismail Hossain, Vladimir I. Velkin and Sergei E. Shcheklein

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821116001

Open Access

Prediction of flow induced vibrations in vertical turbine pumps using one-way fluid-structure interaction 16002

Ravindra Birajdar and Appasaheb Keste

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821116002

TP4: Machinery and structural dynamics

Open Access

Polymeric Bearings as a new base isolation system suitable for mitigating machine-induced vibrations 17001

Tomasz Falborski and Robert Jankowski

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821117001

Open Access

Influence of torsional stiffness on load sharing coefficient of a power split drive system 17002

Guanghu Jin, Wei Ren and Rupeng Zhu

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821117002

Open Access

Dynamic analysis of planetary gear train system with double moduli and pressure angles 17003

Heyun Bao, Guanghu Jin, Fengxia Lu, Rupeng Zhu and Xiaozhu Zou

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821117003

Open Access

A locally defined time-marching technique for structural dynamics 17004

Delfim Soares Jr., Tales Vieira Sofiste and Webe João Mansur

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821117004

Open Access

Prediction of position-dependent stability lobes based on reduced virtual model 17005

Filip Ksica and Zdenek Hadas

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821117005

Open Access

Use of mechanical resonance in impact machines 17006

Wieslaw Fiebig and Jakub Wrobel

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821117006

Open Access

Simulation of plastic deformation and destruction in the process of chip formation 17007

Tanel Tärgla, Jüri Olt and Olga Liivapuu

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821117007

Open Access

Oscillations of a statically indeterminate system with a finite number of degrees of freedom (the experience with the application of mathematical packages in the technical university course of mechanics) 17008

Alexander Kuznechikov, Dmitry Levitskiy and Sergey Zotov

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821117008

Open Access

Comparison of machine learning models based on time domain and frequency domain features for faults diagnosis in rotating machines 17009

Natalia Espinoza Sepulveda and Jyoti Sinha

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821117009

TP5: Rotor dynamics

Open Access

Sensitivity analysis of smart rotor under to uncertainties 18001

Edson H. Koroishi, Fabian A. Lara-Molina and Joana P. Repinaldo

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821118001

Open Access

Modelling and analysis of a high-speed turbine impeller concerning mistuning 18002

Robby Weber, Arnold Kühhorn and Christoph R. Heinrich

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821118002

Open Access

Shooting/continuation based bifurcation analysis of large order nonlinear rotordynamic systems 18003

Sitae Kim and Alan Palazzolo

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821118003

Open Access

Parametric resonances of floating wind turbines blades under vertical wave excitation 18004

Takashi Ikeda, Yuji Harata, Yugo Miyazawa and Yukio Ishida

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821118004

Open Access

FE-BE computation of electromagnetic noise of a permanent-magnetic excited synchronous ma-chine considering dynamic rotor eccentricity 18005

Marcel Clappier and Lothar Gaul

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821118005

Open Access

Fault detection based on instantaneous angular speed measurement and variational mode decomposition 18006

Sanjin Braut, Roberto Žigulić, Ante Skoblar and Goranka Štimac Rončević

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821118006

Open Access

Analysis of the lateral vibrations of an unbalanced Jeffcott rotor 18007

Ali Alsaleh and Hassen M. Ouakad

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821118007

TP7: Composites and nano-structures

Open Access

Visualization of flow phenomena in hydraulic throttle valves of plastics 19001

Michał Banaś, Piotr Antoniak, Lubomir Marciniak and Jarosław Stryczek

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821119001

Open Access

Optimization of parameters of a modal active control in a beam of composite material 19002

Camila Albertin Xavier da Silva, Erik Taketa, Edson Hideki Koroishi, Fabian Andres Lara-Molina and Albert Willian Faria

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821119002

Open Access

Effect of polycaprolactone nanofibers on the vibratory behaviour and the damage resistance of composite laminates 19003

Cristobal Garcia, Irina Trendafilova and Andrea Zucchelli

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821119003

Open Access

A wave and finite element methodology for structural identification in layered composite structures 19004

Rilwan Kayode Apalowo, Dimitrios Chronopoulos and Muhammed Malik

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821119004

Open Access

The influence of temperature on wave scattering of damaged segments within composite structures 19005

Rilwan Kayode Apalowo, Dimitrios Chronopoulos and Muhammed Malik

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821119005

TP11: MEMS, smart structures and systems

Open Access

Experimental results for active control of multimodal vibrations by optimally placed piezoelectric actuators 20001

Andrea Rossi, Fabio Botta, Roberto Maiozzi, Andrea Scorza and Salvatore Andrea Sciuto

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821120001

TP12: Structural health monitoring

Open Access

Non-destructive testing based on vibrations in the low to mid-frequency range 21001

Philip Becht, Elke Deckers, Claus Claeys, Bert Pluymers and Wim Desmet

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821121001

Open Access

An artificial intelligence strategy to detect damage from response measurements: application on an ancient tower 21002

Gabriele Marrongelli, Rafaelle Finotti, Carmelo Gentile and Flavio Barbosa

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821121002

Open Access

A new automated procedure of modal identification in operational conditions 21003

Gabriele Marrongelli and Carmelo Gentile

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821121003

Open Access

A self-powered triboelectric velocity sensor for impact detection in composite structures 21004

Cristobal Garcia and Irina Trendafilova

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821121004

Open Access

Data fusion of acceleration and velocity features (dFAVF) approach for fault diagnosis in rotating machines 21005

Kenisuomo C. Luwei, Jyoti K. Sinha, Akilu Yunusa-Kaltungo and Keri Elbhbah

Published online: 10 October 2018

DOI: https://doi.org/10.1051/matecconf/201821121005

MATEC Web of Conferences

Volume 211 (2018)

The 14th International Conference on Vibration Engineering and Technology of Machinery (VETOMAC XIV)

Statement of Peer review

Message from the Organizers 00001

Invited Papers

This world is full of vibrations 01001

Complex dynamics of drill-strings: Theory and experiments 01002

Projection methods for stochastic structural dynamics 01003

An overview of PST for vibration based fault diagnostics in rotating machinery 01004

NC: Nonlinear Dynamics and Control of Engineering Systems; TP1: Non-linear vibrations

Geometrically nonlinear free and forced vibrations of Euler-Bernoulli multi-span beams 02001

Geometrically nonlinear free and forced vibrations analysis of clamped-clamped functionally graded beams with multicracks 02002

Nonlinear free and forced vibration of Euler-Bernoulli beams resting on intermediate flexible supports 02003

Comparative analysis of strategies for a semi-active suspension of a ¼ vehicle 02004

Experimental study of a passive inverted pendulum control system 02005

Nonlinear damped vibrations of planar discrete systems - numerical and experimental modelling 02006

Stability of the dynamic shifting process in the vehicle transmission with the input shaper 02007

Dynamic analysis of a parametrically excited golden Muga silk embedded pneumatic artificial muscle 02008

Theoretical and experimental investigation of parametrically excited piezoelectric energy harvester 02009

Helical buckling of thin rods: FE modelling 02010

Identifying route to stall flutter through stochastic bifurcation analysis 02011

Investigating the route to flutter in a pitch-plunge airfoil with freeplay nonlinearity subjected to input flow fluctuations 02012

Design and identification of tilt-motor quadrotor control system 02013

ND: Nonlinear Dynamics, Chaos and Control of Elastic Structures; TP6: Condition monitoring, tip-timing, experimental techniques

Analysis of AE characteristics of tool wear in drilling CFRP/Ti stacked material 03001

On the dynamic buckling of very slender structures to self-weight 03002

Tip-timing analysis of last stage steam turbine mistuned bladed disc during run-down 03003

Experimental evaluation of a vibro-impact model for two adjacent shear-building structures 03004

Visualization research on the influence of an ultrasonic degassing system on the operation of a hydraulic gear pump 03005

Vibration of a crane system model equipped with flexible links in the presence of kinematic task-based constraints 03006

Diesel engine vibration monitoring based on a statistical model 03007

Recurrence analysis of fractional-order Lorenz system 03008

Effect of noise on support vector machine based fault diagnosis of IM using vibration and current signatures 03009

Integration of maintenance systems 03010

Prediction of cutting tool vibration and surface roughness in hard turning of AISI52100 steel 03011

In-plane vibration of rotating rings using a high order theory 03012

DS: Dynamic Stability, Deterministic, Chaotic and Random Post-Critical States; TP10: Vibration and waves; TP13: Wave propagation

Singular solutions of a non-holonomic system as limits separating solution groups of particular type 04001

Special discontinuities in models of continuum mechanics 04002

A new simple method for determining the sound absorption coefficient 04003

Acoustic devices for breathing investigations 04004

The acoustic waves propagation in a cylindrical waveguide with the laminar flow 04005

Free vibrations of circular curved beams 04006

Calculation of acoustic flow-rate measurements error with the help of Fermat’s principle 04007

Study of finite amplitude capillary waves stability 04008

EH: Energy Harvesting from Ambient Mechanical Oscillations

Vibrational energy harvesting device with magnetic tip mass 05001

A Bayesian updating procedure for the electromechanical properties of piezoelectric energy harvesters 05002

Energy harvesting from passing train as source of energy for autonomous trackside objects 05003

Experimental evaluation of Tusi couple based energy harvester for scavenging power from human motion 05004

Verified nonlinear model of piezoelectric energy harvester 05005

Vibrational tests of a system with two coupled beams and a distributed tip mass 05006

Performance of broadband tristable energy harvesters 05007

Analysis of pendulums coupled by torsional springs for energy harvesting 05008

SM: Structural Modifications: Modelling Predictions and Experimental Assessment

On reducing uncertainty on the Elliptical Plane modal identification method 06001

Mass-geometric parameters improvement of gearbox by using vibration analysis 06002

An Identification of the unbalanced magnetic pull in generator at excitation and the hydropower machine model validation 06003

Analytical evaluation of the lifetime of a three-axle bogie frame using the analytical model validated through experimental modal analysis 06004

Coupling of structures using frequency response functions 06005

Vibration analysis based on the spectrum kurtosis for adjustment and monitoring of ball bearing radial clearance 06006

VE: Simulation and/or Virtual Experiments for Vehicle Vibro-Acoustic Response

FE sloshing modelling in bidimensional cavity using wave equation 07001

VS: Vibration Problems in Strongly Nonlinear Mechanical Dissipative Systems

Weak fault feature extraction of gear based on KVMD and singular value difference spectrum 08001

Wear depth calculation and influence factor analysis for groove ball bearing 08002

A new approximate model of tyre accounting for both deformed state and dry friction forces in the contact spot on the background of the coupled model 08003

Implementation of analytical models of the anisotropic combined dry friction in problems of pneumatics’ dynamics 08004

BD: Bridge Dynamics

Assessment of human-induced vibrations of a cable-stayed footbridge 09001

Dynamic assessment of a cable-stayed footbridge under earthquake sequence using a concrete damage plasticity model (CDP) 09002

Seismic performance of a masonry arch viaduct subjected to foreshocks and a mainshock 09003

Dynamic forces with random amplitudes from rhythmic jumps and squats 09004

FV: Lessons in Floor Vibrations: New Design and Retrofit

Proposal of new vibro-acoustic floor 10001

Vibration analysis of footbridges: an overview of the current practice 10002

Controlling construction-induced vibrations in healthcare facilities 10003

ML: Vibration of Solids and Structures under Moving Loads

On the sloshing effect in half-filled freight trains during braking 11001

The 14^th International Conference on Vibration Engineering and Technology of Machinery (VETOMAC XIV)