Issue |
MATEC Web Conf.
Volume 211, 2018
The 14th International Conference on Vibration Engineering and Technology of Machinery (VETOMAC XIV)
|
|
---|---|---|
Article Number | 17006 | |
Number of page(s) | 6 | |
Section | TP4: Machinery and structural dynamics | |
DOI | https://doi.org/10.1051/matecconf/201821117006 | |
Published online | 10 October 2018 |
Use of mechanical resonance in impact machines
Wroclaw University of Science and Technology, Department of Mechanical Engineering,
50-370
Wroclaw,
Lukasiewicza 7/9,
Poland
* Corresponding author: wieslaw.fiebig@pwr.edu.pl
An innovative method exploiting mechanical resonance in machines drive systems, especially useful in impact machines, has been developed. Accumulation of energy at resonance can be applied to the drive system in a similar way as flywheels in eccentric presses. Under resonance conditions, the total energy consumption of the oscillating mass is equal to the energy lost due the damping forces. Energy accumulated in the oscillator can be several times greater than the energy supplied continuously to the oscillator. The developed method can be used in many applications, especially in impacting machines. Finally, the energy demand of resonance punching press will be compared with the energy demand of eccentric press.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.