MATEC Web Conf.
Volume 211, 2018The 14th International Conference on Vibration Engineering and Technology of Machinery (VETOMAC XIV)
|Number of page(s)||5|
|Section||ND: Nonlinear Dynamics, Chaos and Control of Elastic Structures; TP6: Condition monitoring, tip-timing, experimental techniques|
|Published online||10 October 2018|
Diesel engine vibration monitoring based on a statistical model
Portuguese Naval Academy, Centro de Investigação Naval (CINAV),
2 Faculty of Science and Technology of the Universidade Nova of Lisbon, Mechanical and Industrial Engineering Department
3 Portuguese Naval Academy, Centro de Investigação Naval (CINAV), Portugal
* Corresponding author: email@example.com
There are various causes for vibrations on diesel engines. The engine vibrations depend not only on the present state of the engine, but also on the fuel quality, the environmental conditions (sea state in the case of shipborne engines), type of casing, other equipment in the vicinity, etc. The engines used for this study are installed aboard a ship, and the main aim is to use modified control charts to assess the condition of the engine and recommend corrective measures when necessary. An important issue to do this correctly is choosing the right places to measure vibration. The collected data is vibration at various engine power levels, measured at various points. The engine’s fault history is taken into consideration, but proved to be almost irrelevant. By using modified control charts, the engine vibrations can be estimated, and faults can be detected and classified so as to take corrective actions. In this study we followed a methodology that is slightly different from our previous work, and achieved good results.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.