MATEC Web of Conferences

Open Access

Development of Resource-Saving Technological Processes for Manufacturing Rings by the Compression Method 01001

V. Yu. Lavrinenko and A. O. Polyakov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601001

• Abstract
• PDF (225.2 KB)
• References

Open Access

Development the Six-Jaw Self-Centering Geared Scroll Chuck 01002

A. S. Serkov, V. B. Masyagin, L. B. Serkova and R. I. Bazhenov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601002

• Abstract
• PDF (993.4 KB)
• References

Open Access

Implementation of a Group Cutting Scheme during Processing of Large-Module Gears with a Prefabricated Tool 01003

E.V. Artamonov, V.V. Kireev and V.A. Zyryanov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601003

• Abstract
• PDF (1.055 MB)
• References

Open Access

Simulating modular rolling guides elastic properties 01004

L. Ya. Gilovoi, A. V. Isaev, A. V. Krutov and V. V. Molodtsov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601004

• Abstract
• PDF (1.321 MB)
• References

Open Access

Analysis of Compacting Stress in Fibrous Composites Elementary Cell by Mathematical Modeling 01005

Victor Galkin, Andrey Paltievich and Evgeny Galkin

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601005

• Abstract
• PDF (1.122 MB)
• References

Open Access

Multidimensional Model of Product Quality Formation 01006

Julius Tchigirinsky, Nadezhda Gribanova, Alina Gontar and Nataly Chigirinskaya

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601006

• Abstract
• PDF (1.161 MB)
• References

Open Access

Analysis of Linear Dimension Accuracy of Sheet Metal Bending 01007

Evgeniy Safronov and Andrey Nosko

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601007

• Abstract
• PDF (2.062 MB)
• References

Open Access

To the Question of the Reasons for Decrease in the Durability of Cutting Tools with a Diamond-Like Coating 01008

Yacov Lieberman, Svetlana Lukinskikh, Ksenia Kulpina and Yana Sarvarova

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601008

• Abstract
• PDF (1.878 MB)
• References

Open Access

Development and Optimization of Control Programs for 2.5-Coordinate Milling of Three-Dimensional Workpieces on CNC Machines 01009

Andrey Averchenkov, Inna Koloshkina and Sergey Sheptunov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601009

• Abstract
• PDF (2.085 MB)
• References

Open Access

Additive Technology Methods for Manufacturing Permanent Magnets 01010

Dmitry Efremov, Alla Gerasimova, Nikita Kislykh and Cristina Shaibel

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601010

• Abstract
• PDF (1.809 MB)
• References

Open Access

Elaboration of the Equipment and Technology for Cutting Rolled Round Bars and Pipes with the Cyclic Circular Bending Method 01011

Aleksej Antimonov, Sergej Poljanskij and Nadezhda Pushkareva

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601011

• Abstract
• PDF (2.332 MB)
• References

Open Access

Experimental Study of the Distribution of Temperature Fields in the Butt Contour of a Welded Joint Made of Carbon and High-Alloy Structural Steels 01012

Lubov Mironova, Ruclan Nigay and Evgenij Nigay

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601012

• Abstract
• PDF (1.725 MB)
• References

Open Access

Fatigue Resistance of 01420 S Alloy Welded Joints Made by Various Welding Methods 01013

Victor Ovchinnikov, Lyudmila Andreeva, Gulnara Latypova and Irina Klimenko

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601013

• Abstract
• PDF (2.142 MB)
• References

Open Access

Technological Approaches to Thermomechanical Processing of Quartz Glass Parts 01014

Anna Basharova, Aleksey Schenyatskiy and Mikhail Kotelnikov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601014

• Abstract
• PDF (1.984 MB)
• References

Open Access

Application of Multi-Contour Cutting in Algorithms for Solving the Cutting Path Problem 01015

Anastasiia Tavaeva, Aleksandr Petunin and Efim Polishchuk

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601015

• Abstract
• PDF (1.854 MB)
• References

Open Access

Investigation of the Pipe Weld for Brittle Metal Fracture 01016

V.B. Kulnevich and E.V. Mal’kova

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601016

• Abstract
• PDF (1.737 MB)
• References

Open Access

Tribomechanical Properties of the Modified Surface of Alloys of the WC-Co System 01017

Tatyana Oskolkova, Sergey Yaresko and Sergey Balakirov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601017

• Abstract
• PDF (2.105 MB)
• References

Open Access

Influence of Recrystallization Annealing Modes on the Mechanical Properties of Copper Pipes After Large Plastic Deformation 01018

Maria Shalaeva and Yuri Loginov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601018

• Abstract
• PDF (1.775 MB)
• References

Open Access

Selection and Justification of Information Security Indicators for Materials Processing Systems 01019

Igor Kotenko, Igor Parashchuk and Didier El Baz

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601019

• Abstract
• PDF (1.859 MB)
• References

Open Access

Telecommunication Network for Controlling the Processes of Micro-Sized Structures Topology Formation 01020

Ruslan Chkalov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601020

• Abstract
• PDF (1.949 MB)
• References

Open Access

Macroscopic Model of an Abrasive Tool 01021

Nikolay Nosov, Roman Grishin, Roman Ladyagin, Vladimir Rodionov and Yaroslav Gordienko

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601021

• Abstract
• PDF (1.713 MB)
• References

Open Access

Multifunctional Complex of Thermomechanical Calibration by Screw Compression 01022

Nikita Balobanov, Vyacheslav Dementyev, Sergey Makarov, Evgeny Suntsov and Alexander Korshunov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601022

• Abstract
• PDF (1.868 MB)
• References

Open Access

Physical modeling low-waste technological process of the round forging hot stamp 01023

Igor Telegin and Viktor Telegin

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601023

• Abstract
• PDF (1.960 MB)
• References

Open Access

Researches of the Dynamics of Cutting Through of the Material by a Water-Ice Jet 01024

Mikhail Burnashov, Anton Tryastsin, Yuriy Stepanov and Vitaly Kuzin

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601024

• Abstract
• PDF (1.895 MB)
• References

Open Access

The Effect of Technological Parameters on the Formation of Fillet Welds in Two-Electrode Submerged Arc Welding 01025

Mikhail Sholokhov, Daria Buzorina, Anton Melnikov, Andrey Fiveyskii and Alexey Mosin

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601025

• Abstract
• PDF (1.893 MB)
• References

Open Access

Determination of the Parameters of the Trajectory of Movement of a Standard Tool in Multi-Coordinate Machining of Spatially Modified Teeth of Spur Wheels with the Copying Technique 01026

Roman Grubka, Alexander Mikhaylov, Irina Petryaeva, Natalya Pichko and Larisa Polyakova

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601026

• Abstract
• PDF (2.032 MB)
• References

Open Access

Modernization of a Chemical Nickeling Unit for Metal Products 01027

Andrey Borisenko, Vadim Khramtsov, Vladimir Nemtinov and Yulia Nemtinova

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601027

• Abstract
• PDF (1.814 MB)
• References

Open Access

Influence of transverse ultrasonic vibrations on the efficiency of threaded joint assembly 01028

Aleksandr V. Sukhov, Boris A. Cudryashov, Aleksandr A. Nechay and Dmitriy S. Simonov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601028

• Abstract
• PDF (1.814 MB)
• References

Open Access

Improving the Accuracy and Quality of the Surface Layer of Products by Local Magnetic Pulse Processing 01029

Vasily Gritsyuk, Evgeny Smolentsev, Dmitriy Krokhin and Aleksandr Pechagin

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601029

• Abstract
• PDF (1.807 MB)
• References

Open Access

Method for Optimizing the Kinematic Scheme of Stretch-Forming Parts from Sheet Blanks 01030

Konstantin Bormotin, Anton Krivenok, Maria Pogartseva and Min Ko Hlaing

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601030

• Abstract
• PDF (1.877 MB)
• References

Open Access

Experimental research on processing incomplete spherical surfaces of machine parts 01031

Andrei Katunin, Mikhail Burnashov, Anton Tryastsin and Alexander Edapin

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601031

• Abstract
• PDF (2.204 MB)
• References

Open Access

Experimental Study of Features of Thin-Walled Pipes Sizing in the Line of a Pipe Rolling Plant with an Automatic Mill 01032

S.Yu. Belyaev, A.A. Fedulov, Yu.M. Chernyshev, V.I. Kuznetsov and M.Yu. Bulganina

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601032

• Abstract
• PDF (2.253 MB)
• References

Open Access

Applying of Pressing Technology to Forming Finger-Joint Profile for Wood Splicing 01033

Olga Rubleva

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601033

• Abstract
• PDF (1.963 MB)
• References

Open Access

Effect of Modifiers Introduced into Cold Phosphating Solutions on the Physical and Mechanical Properties of the Formed Phosphate Films 01034

Viktoriya Konovalova

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601034

• Abstract
• PDF (2.084 MB)
• References

Open Access

Experimental Studies on the Influence of Electrochemical Dimensional Processing on the Surface Fatigue of Rolls in Rolling Machines 01035

Alexander A. Boldyrev, Alexander I. Boldyrev, Alla V. Perova and Anna A. Padurets

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601035

• Abstract
• PDF (1.728 MB)
• References

Open Access

The Study of the Flat Grinding Process of Workpieces of Composite Materials 01036

Valeriy Sapunov, Nikolai Vetkasov and Sergey Varlamov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601036

• Abstract
• PDF (1.636 MB)
• References

Open Access

Production of Pigments on the Basis of Titanium Tetrachloride 01037

Alexander Vyboishchik and Mikhail Popov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601037

• Abstract
• PDF (1.828 MB)
• References

Open Access

Mathematical Model of Rotary Machined Helical Surfaces 01038

Mikhail Popov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601038

• Abstract
• PDF (1.797 MB)
• References

Open Access

Investigation of the Finishing Technology of SLM Implants 01039

Timur Ablyaz, Karim Muratov, Evgenii Shlykov, Ilia Osinnikov and Luiza Konogorova

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601039

• Abstract
• PDF (1.750 MB)
• References

Open Access

Additive Manufacturing in the Development of Scalable Models of Technological Equipment 01040

Ildar Sabanaev and Alexey Dinmuhametov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601040

• Abstract
• PDF (1.961 MB)
• References

Open Access

CAE Modeling of Hot Stamping Tool Wear 01041

A. Chernov, Yu. Korobov and E. Raskatov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601041

• Abstract
• PDF (1.732 MB)
• References

Open Access

Influence of Process and Billet Parameters on the Dimensional Accuracy of Hexagonal Pipes During Mandrel Drawing 01042

Evgenii Raskatov and Anastasia Parshina

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601042

• Abstract
• PDF (2.056 MB)
• References

Open Access

Analysis of Influence of Scale Factor and Design on Performance Characteristics and Stress Strain State of Micro Sensing Element 01043

Mikhail Kotelnikov, Aleksey Schenyatskiy and Anna Basharova

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601043

• Abstract
• PDF (1.929 MB)
• References

Open Access

Investigation on Fabrication of SS316 Gear by Wire-EDM 01044

Kapil Gupta

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601044

• Abstract
• PDF (1.932 MB)
• References

Open Access

Theoretical-Probability Model for Calculating Roofness in Magnetic Abrasive Machining 01045

Alexey Ikonnikov and Sergey Leonov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601045

• Abstract
• PDF (1.821 MB)
• References

Open Access

Increasing the Efficiency of Milling Stainless Steels by Using a Modified Lubricant-Cooling Fluid 01046

Vladimir Skakun and Eldar Vaniev

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134601046

• Abstract
• PDF (2.344 MB)
• References

Open Access

Optimization of Deposited Coating Chemical Composition during Operation in Urea Medium 02001

Aleksandr Nazarko and Roman Plomodyalo

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602001

• Abstract
• PDF (1.870 MB)
• References

Open Access

The Stability of Laser Hardening Structures to Softening During Heating 02002

Andrey Brover, Galina Brover, Olga Moysova and Valeriya Yankovskaya

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602002

• Abstract
• PDF (1.954 MB)
• References

Open Access

Investigation of the Structure of Hard Alloys That Have Undergone Bulk Pulsed Laser Hardening Using X-Ray Structural Analysis 02003

Igor Pinahin, Michael Yagmurov, Svetlana Vrublevskaya and Maria Shpack

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602003

• Abstract
• PDF (178.4 KB)
• References

Open Access

Composite Metal-Matrix Alloys Based on Ni-Al for Obtaining Wear-Resistant Coatings by Electric Spark Deposition 02004

S.N. Khimukhin, S.V. Nikolenko, L.A. Konevtsov and E.D. Kim

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602004

• Abstract
• PDF (1.897 MB)
• References

Open Access

Technology for the Formation of Functional Coatings Based on Glass Microspheres 02005

Alexey Kuchugurov, Nikolay Shardakov, Inna Kovyazina and Nadezhda Lukoyanova

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602005

• Abstract
• PDF (1.836 MB)
• References

Open Access

Study of the Influence of Anionic Composition of Salts on Synthesis of Zinc Orthostannate by the Sol-Gel Method 02006

Valeriy Anisimov, Aleksey Saprykin, Irina Artemkina and Nikolay Makarov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602006

• Abstract
• PDF (2.384 MB)
• References

Open Access

Composite Corundum Ceramics with Reinforcing Carbon Nanotubes Modified with Eutectic Additives 02007

Dmitriy Antonov, Stepan Pavlov and Nikolay Makarov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602007

• Abstract
• PDF (2.221 MB)
• References

Open Access

Sol-gel Synthesis of Materials in the System ZnO – SnO₂ 02008

Stepan Pavlov and Nikolay Makarov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602008

• Abstract
• PDF (2.588 MB)
• References

Open Access

New Composite Materials With a “Liquid” Matrix 02009

Ekaterina Kosenko and Vladimir Nelyub

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602009

• Abstract
• PDF (1.885 MB)
• References

Open Access

Influence of Polymer Matrix Chemical Nature and Molding Technology on the Quality of Carbon Fiber Reinforced Polymer Parts 02010

Tatiana Guzeva, Maria Dronova and Artyom Falman

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602010

• Abstract
• PDF (1.677 MB)
• References

Open Access

The Investigation of Mechanical and Functional Properties and Microstructural Features of Coarse-Grained SME Ti_49.0Ni_51.0 Alloy during Multiple Martensitic Transformations and Annealing 02011

Anna Churakova, Elina Kayumova and Dmitry Gunderov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602011

• Abstract
• PDF (3.308 MB)
• References

Open Access

Application of the Method of Coprecipitation of Salts to Obtain Zinc Orthostannate 02012

Dmitry A. Antonov, Valery V. Anisimov and Mikhail A. Tarasenko

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602012

• Abstract
• PDF (2.431 MB)
• References

Open Access

Research of Kinetic Impregnation Process Based on the Structure of Reinforcing Filler 02013

Phone Thant Kyaw, Pyae Phyo Maung and G.V. Malysheva

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602013

• Abstract
• PDF (1.948 MB)
• References

Open Access

Increased Wear Resistance of High-Speed Tools Due to Diffusion Discrete Oxidation 02014

Elena A. Chekalova and Andrey V. Zhuravlev

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602014

• Abstract
• PDF (2.070 MB)
• References

Open Access

Method of Predicting the Polymer Composites’ Properties Using Neural Network Modeling 02015

D. Vdovin, A. Abramochkin, A. Borodulin and V. Nelyub

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602015

• Abstract
• PDF (1.916 MB)
• References

Open Access

Study of Chromium Effect on Structure and Wear-Resisting Properties of Complex Alloyed Brass 02016

Maksim O. Ivkin, Raisa K. Mysik, Sergej V. Brusnicyn and Andrej V. Sulicin

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602016

• Abstract
• PDF (1.928 MB)
• References

Open Access

Calculation of the Thermal Stress when Subjected to an Electric Current on Glass and Carbon Fibers with Copper Coatings 02017

S. Fedorov, D. Borisov and V. Nelyub

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602017

• Abstract
• PDF (1.793 MB)
• References

Open Access

Analysis of Wear-Resisting Properties of a Sintered Sample Obtained from Steel X13 Machined Using EDM 02018

E.V. Ageev, S.V. Khardikov, O.G. Loktionova and V.I. Kolmykov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602018

• Abstract
• PDF (2.216 MB)
• References

Open Access

Investigation of the Microstructure of a Sintered Sample Obtained from Powder Steel X13 02019

S.V. Khardikov, E.V. Ageeva, V.I. Kolmykov and V.I. Serebrovsky

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602019

• Abstract
• PDF (1.705 MB)
• References

Open Access

Expansive Concretes for Shotcrete in Tunnel Construction 02020

Igor Kharchenko, Alexander Panchenko and Aleksey Kharchenko

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602020

• Abstract
• PDF (1.804 MB)
• References

Open Access

Formation of PEO Coatings Modified by SiC Nanoparticles on the MA8 Magnesium Alloy 02021

Dmitry V. Mashtalyar, Igor M. Imshinetskiy, Konstantine V. Nadaraia, Marina V. Sidorova, Sergey L. Sinebryukhov and Sergey V. Gnedenkov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602021

• Abstract
• PDF (2.078 MB)
• References

Open Access

Structure of Zinc Coating on Steels Formed by Diffusion Saturation in Nitrogen-Containing Atmosphere 02022

Larisa Petrova, Peter Demin, Galina Timofeeva and Khushnuda Sharifhodgaeva

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602022

• Abstract
• PDF (2.332 MB)
• References

Open Access

Anodizing under conditions of oxygen activation of the inter-electrode gap 02023

Nikolay Kolenchin and Denis Denisenko

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602023

• Abstract
• PDF (2.053 MB)
• References

Open Access

Electric Spark Alloying of Radiant Coils for Pyrolysis Furnaces 02024

Mikhail Taymarov and Elena Saltanaeva

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602024

• Abstract
• PDF (1.750 MB)
• References

Open Access

Effect of High-Temperature Quenching on the Phase Composition, Structure, and Wear Resistance of Ni-Hard Chromium-Nickel Cast Iron 02025

M.A. Filippov, V.A. Sharapova, L.A. Moshechkova and S.O. Morozov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602025

• Abstract
• PDF (1.940 MB)
• References

Open Access

Stabilization of the Dispersed System of Halloysite Nanotubes for Silicate Constructional Material 02026

Natalia Lukuttsova, Sergey Golovin, Natalia Zolotukhina and Olga Sycheva

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602026

• Abstract
• PDF (1.910 MB)
• References

Open Access

Thermodynamic Modeling of Ni-Si-Cr-B-C System in Air and Propane Atmosphere 02027

Nina Ilinykh, Anastasia Krivorigova, Boris Gelchinski and Sergey Ilinykh

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602027

• Abstract
• PDF (2.496 MB)
• References

Open Access

Deformation Aging in Low Carbon Steels 02028

Sergey Mikhailov, Valentina Sharapova, Ekaterina Skobelina and Leonid Molokov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602028

• Abstract
• PDF (1.628 MB)
• References

Open Access

Analytical Study of the Process of Dissolution of Silicon from a Modifier Particle 02029

Denis Boldyrev, Maksim Kharchenko, Ruslan Amirov and Anton Bokov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602029

• Abstract
• PDF (1.624 MB)
• References

Open Access

Electroplating of Chromium Incorporating High-Dispersion Black Carbon Particles 02030

S.V. Vodopyanova, G.G. Mingazova, R.E. Fomina and R.S. Sayfullin

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602030

• Abstract
• PDF (1.873 MB)
• References

Open Access

Investigation of the Composition, Structure and Properties of New Porous Powder Friction Coatings Obtained by Plasma Sputtering 02031

V. I. Karlov and Yu. I. Krykhtin

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602031

• Abstract
• PDF (2.279 MB)
• References

Open Access

The Study of the Preliminary Forming Process of the Highly-Homogeneous Mixture Consisting of the Aluminum Powder – CNT in the Production Technology of Composite Materials 02032

Nikolai Vetkasov, Valeriy Sapunov and Sergey Varlamov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602032

• Abstract
• PDF (1.678 MB)
• References

Open Access

Features of Constructing Recrystallization Curves of the 2nd and 3rd Types for High-Alloy Alloys of Various Structural Classes VZH159 and 14Cr17Ni2 02033

V.V. Galkin, P. M. Yavtushenko, A.A. Generalov, A. S. Fomichev and E.O. Bazhenov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602033

• Abstract
• PDF (1.036 MB)
• References

Open Access

FGM Architecture with Heat-Resistant Properties 02034

Svetlana A. Oglezneva, Maxim N. Kachenyuk and Andrey A. Smetkin

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602034

• Abstract
• PDF (2.063 MB)
• References

Open Access

Surface Strengthening of High-Alloyed Martensitic Steel by Staged Nitriding 02035

Petr Bibikov, Larisa Petrova, Irina Belashova and Peter Demin

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602035

• Abstract
• PDF (2.086 MB)
• References

Open Access

The Application of Plasma Processes during the Production of Pigments 02036

Alexander Vyboishchik and Mikhail Popov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602036

• Abstract
• PDF (1.774 MB)
• References

Open Access

Production of Pigments on the Basis of Titanium Tetrachloride 02037

Alexander Vyboishchik and Mikhail Popov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602037

• Abstract
• PDF (1.667 MB)
• References

Open Access

Multifractal Formalism in Tasks of Dynamic Plasticity 02038

Aleksander Kuznetsov, Georgii Savenkov and Vladimir Stolyarov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602038

• Abstract
• PDF (3.114 MB)
• References

Open Access

Investigation of the Evolution of Magnetic and Acoustic Characteristics as a Result of Annealing of Cold-Deformed Nickel 02039

Vladimir Kostin, Evgeny Serbin and Olga Vasilenko

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602039

• Abstract
• PDF (1.617 MB)
• References

Open Access

Application of coercimetry to assess the functional properties of materials 02040

Vladimir Kostin, Danila Ksenofontov, Olga Vasilenko and Alexander Byzov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602040

• Abstract
• PDF (1.690 MB)
• References

Open Access

Functional Protective Coatings for Steel Architectural Construction Panels 02041

Anna V. Ryabova, Anna Yu. Fanda and Sergey V. Trofimov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602041

• Abstract
• PDF (2.109 MB)
• References

Open Access

The development of the method for identifying the hardening curves of materials based on the results of torsion tests of notched specimens 02042

Mikhail Erpalov and Evgeny Panin

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602042

• Abstract
• PDF (2.022 MB)
• References

Open Access

Durability of Polymer Powder Coatings 02043

Vladimir Fedyaev, Engel Galimov, Alexey Belyaev and Liliya Sirotkina

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134602043

• Abstract
• PDF (1.607 MB)
• References

Open Access

Fuzzy Models for Evaluating the Effect of Radio Frequency Electromagnetic Fields on Health 03001

Anna V. Titova, Nikolay A. Korenevskiy and Mariia Iu. Goltsova

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603001

• Abstract
• PDF (1.856 MB)
• References

Open Access

Approach to Anomaly Detection in Self-Organized Decentralized Wireless Sensor Network for Air Pollution Monitoring 03002

Alexey Meleshko, Vasily Desnitsky and Igor Kotenko

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603002

• Abstract
• PDF (2.159 MB)
• References

Open Access

An Enterprise Management Framework for Costs Engineering Estimation Models Based on Scopus Scientometrics. An Aerospace Engineering Case Study 03003

T. V. Aksenova

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603003

• Abstract
• PDF (1.887 MB)
• References

Open Access

Optimization of MFA parameters for harrowing crops with simultaneous fertilization 03004

Alexander Serguntsov and Leonid Alekseenko

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603004

• Abstract
• PDF (1.989 MB)
• References

Open Access

Justification of the Coefficient of Use of the Working Time of the Unit Change for Harrowing Winter Crops with Simultaneous Top Dressing 03005

Alexander Serguntsov and Sergey Lagoda

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603005

• Abstract
• PDF (1.710 MB)
• References

Open Access

Influence of Design and Technological Parameters of Disk Working Bodies on the Height of the Crest of the Bottom of the Furrow 03006

Vladimir I. Konovalov and Sergey I. Konovalov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603006

• Abstract
• PDF (1.882 MB)
• References

Open Access

Kinematic Analysis of a Disk Working Body with a Changing Radius of Curvature 03007

Vladimir I. Konovalov, Sergey I. Konovalov and Viktor I. Baradakov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603007

• Abstract
• PDF (1.859 MB)
• References

Open Access

Numerical Simulation of the Instability of a Non-Isothermal Liquid Film in Film Devices 03008

L.A. Prokudina and M.P. Vikhirev

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603008

• Abstract
• PDF (1.823 MB)
• References

Open Access

Mathematical Model of the Process of Pallet Movement Along the Magnetic Type Centrifugal Brake Roller 03009

Ildar Sharifullin, Andrey Nosko and Yevgeniy Safronov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603009

• Abstract
• PDF (1.976 MB)
• References

Open Access

Analysis of Designs of Distribution Systems of Grain Pneumatic Seeders 03010

Azamat E Bogus, Vladislav Stanin and Alina Vyshebabina

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603010

• Abstract
• PDF (1.737 MB)
• References

Open Access

Design scheme and operating principle of a centrifugal seed distributor of a pneumatic grain seeder 03011

Azamat E. Bogus and Alina Vyshebabina

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603011

• Abstract
• PDF (1.798 MB)
• References

Open Access

Experimental Observation of a Regression Dependence for Hydrodynamic Performance of the Regular Packing 03012

Alexey Balchugov and Artem Badenikov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603012

• Abstract
• PDF (1.882 MB)
• References

Open Access

Stability assessment methods of technological processes 03013

Julius Tchigirinsky, Nataly Chigirinskaya and Alexander Evtyunin

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603013

• Abstract
• PDF (1.863 MB)
• References

Open Access

Design Improvement of Cutting Part in Tunneling Shield 03014

Anton Letopolsky, Pavel Korchagin and Irina Teterina

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603014

• Abstract
• PDF (1.986 MB)
• References

Open Access

Investigation of the Effect of the Front Angle on the Strength of the Cutting Wedge by Photomecanics 03015

Olga Zhed, Mikhail Kozochkin and Katerina Kazymaeva

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603015

• Abstract
• PDF (3.493 MB)
• References

Open Access

Mathematical Model of Influence of Geometric Parameters on Wave Gear Teeth Wear 03016

I. Ye. Lyuminarskiy, S.Ye. Lyuminarskiy and Ye. S. Lyuminarskaya

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603016

• Abstract
• PDF (1.889 MB)
• References

Open Access

Dependence of Elastic Deformations of Spindle-Tool Subsystem on Influence of Cutting Force Radial Component 03017

O. Yu. Kazakova and L. B. Gasparova

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603017

• Abstract
• PDF (1.892 MB)
• References

Open Access

Risk Analysis is a Prerequisite for Quality Management of Traction Rolling Stock Repairs 03018

Vladimir Gaponov, Dmitriy Kuznetsov, Andrey Khvostikov and Roman Alekhin

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603018

• Abstract
• PDF (1.734 MB)
• References

Open Access

Development of Construction and Repair Materials Used in Transport and Technological Machines Operating in the Arctic 03019

Ekaterina Kosenko, Natalia Baurova, Vladimir Zorin and Alexander Konoplin

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603019

• Abstract
• PDF (1.934 MB)
• References

Open Access

Machine-Building Enterprise Work Improvement Based on Application of the Process Approach 03020

Evgenii V. Kalinin, Ludmila L. Kalinina and Dmitrii A. Metelev

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603020

• Abstract
• PDF (1.665 MB)
• References

Open Access

Value Analysis of the Machine-Building Enterprise Repair Facilities Activities 03021

Tatyana A. Mineeva, Nadezhda A. Kuznetsova and Nataliia E. Kalinina

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603021

• Abstract
• PDF (1.887 MB)
• References

Open Access

Machine-Building Enterprise Sustainable Development Level Assessment 03022

Elena Yu. Kuznetsova, Olga O. Podoliak, Tawfeek Albasha and Aleksey V. Ershov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603022

• Abstract
• PDF (1.806 MB)
• References

Open Access

Recommendations on Diagnostics of Support Condition of High-Speed Spindle Units 03023

Eric Gasparov, Lana Gasparova and Gevorg Markosyan

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603023

• Abstract
• PDF (1.865 MB)
• References

Open Access

An Application of Antifriction Coatings to Increase the Lifetime of Friction Units 03024

Aleksandr V. Antsupov, Artem A. Fedulov, Alexey V. Antsupov and Victor P. Antsupov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603024

• Abstract
• PDF (1.796 MB)
• References

Open Access

Organizational Problems of Machine-Building Enterprises in the Context of Small-Scale Production 03025

Lyudmila Tipner, Yuliya Markova and Nikita Vasiliev

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603025

• Abstract
• PDF (1.672 MB)
• References

Open Access

The Potential Contamination Scenarios simulation in Case of the Water Chlorination Technological Process Violation in the Urban Environment 03026

Irina Lapshina, Olga Usenko and Alena Zhidkova

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603026

• Abstract
• PDF (2.214 MB)
• References

Open Access

Forecasting Sales Volumes of Small and Medium-Sized Machine-Building Enterprises 03027

Irina V. Ershova, Maria A. Prilutskaya and Andrey V. Klyuev

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603027

• Abstract
• PDF (1.655 MB)
• References

Open Access

Evaluation of the Ratio of Heat Exchanging Tube Finning on Heat Exchanger Efficiency 03028

Mihail Khizhov and Lubov Mironova

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603028

• Abstract
• PDF (1.659 MB)
• References

Open Access

Use of Solar Panels in the Design of Small CubeSat Spacecraft 03029

Kirill V. Selivanov, Igor A. Vasiliev and Arina A. Yakovenko

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603029

• Abstract
• PDF (1.815 MB)
• References

Open Access

Identification of the Model of the Dynamic System of a Milling Machine Based on the Study of Vibroacoustic Characteristics 03030

Rustem Khusainov and Dinar Safin

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603030

• Abstract
• PDF (1.765 MB)
• References

Open Access

Acceleration of Evaluation, Synthesis and Selection of Engineering Solutions by Morphological Approaches 03031

Dmitry Rakov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603031

• Abstract
• PDF (1.851 MB)
• References

Open Access

Investigation of the Causes of Premature Failure of the Suspension and Brake System of Buses “Volgabus” 03032

A. V. Popov, G. A. Chernova, M. V. Velikanova and N. S. Khvan

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603032

• Abstract
• PDF (1.842 MB)
• References

Open Access

Algorithm of Energy-Saving Control Over Hammers of Active Excavator Buckets 03033

Yako Liberman, Konstantin Letnev and Lyubov Gorbunova

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603033

• Abstract
• PDF (1.711 MB)
• References

Open Access

Theoretical Studies of Bounce in Rod-Type Microswitches 03034

E.S. Lyuminarskaya

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603034

• Abstract
• PDF (1.820 MB)
• References

Open Access

Developing an Algorithm for Selecting Experts That Determine Technical Characteristics of Technological Equipment 03035

A.N. Feofanov and A.G. Busheva

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603035

• Abstract
• PDF (1.856 MB)
• References

Open Access

Stochastic Processes Occurring during the Transition of Technical State of the Structure 03036

Yury Izvekov, Oleg Tulupov, Vladislav Dubrovsky and Alexey Kanel-Belov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603036

• Abstract
• PDF (1.666 MB)
• References

Open Access

Nonlinear Dynamics of Heavy Structures 03037

Yury Izvekov, Oleg Tulupov, Irina Kinzina and Alexey Kanel-Belov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603037

• Abstract
• PDF (1.677 MB)
• References

Open Access

Mechanical Engineering Product Value Design Applying the Value Engineering Method 03038

Maria Prilutskaya, Anastasia Murukina and Tatiana Dashkova

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603038

• Abstract
• PDF (2.024 MB)
• References

Open Access

Numerical Simulation of Conjugate Heat Exchange at Gas Flowing in a Well 03039

Michael Al’es, Sergey Makarov and Alexandr Karpov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603039

• Abstract
• PDF (1.780 MB)
• References

Open Access

Systematization of the Mineral Raw Material Waste Recycling Process 03040

Anatoly Bardovsky, Ilnur Basyrov and Liliya Valeeva

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603040

• Abstract
• PDF (1.699 MB)
• References

Open Access

Monad Theory of Structural Synthesis of Mechanisms 03041

Sergey Kuznetsov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603041

• Abstract
• PDF (1.786 MB)
• References

Open Access

Leveling Out the Effect of Sample Runouts on Wear when Testing on the SMT-1 Friction Machine 03042

V.A. Pogonyshev, V.E. Torikov, I.A. Mokshin, D.A. Pogonysheva and A.A. Boiko

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603042

• Abstract
• PDF (1.780 MB)
• References

Open Access

Informativity of the Vibration Signal of the Spindle Unit of the Metal Cutting Machine 03043

Alexander Denisenko and Viktor Mikhailov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603043

• Abstract
• PDF (1.799 MB)
• References

Open Access

Development of a Monitoring System for Maintenance and Repair of High-Tech Equipment 03044

Andrey Korneev, Alexandr Kozlov, Tamara Lavrukhina and Andrey Strukov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603044

• Abstract
• PDF (2.160 MB)
• References

Open Access

Planning and Design of Robotic Production 03045

Luis Fernando Roque Vidal and Olga Ogorodnikova

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603045

• Abstract
• PDF (1.756 MB)
• References

Open Access

Evaluation of Resources of a Part Depending on its Renewal Density 03046

Ivan Masienko, Sergei Shevchenko and Artem Vasilenko

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603046

• Abstract
• PDF (1.652 MB)
• References

Open Access

The Automated Management Implementation of the Distributed Information Systems’ Communication Infrastructure 03047

Sergey Kodolov and Olga Aksyonova

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603047

• Abstract
• PDF (1.754 MB)
• References

Open Access

Simulation Modeling of the Tilting Mechanism of the Main Trolley of the Turnaround Charging Crane 03048

V. A. Spiridonov, A. M. Tkachenko, R. A. Slavnitskiy and A. S. Biushkina

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603048

• Abstract
• PDF (1.938 MB)
• References

Open Access

Simulation of a Contact Pseudo-Environment in Calculating Thermal Resistance 03049

Alexander Denisenko, Roman Grishin and Liubov Podkruglyak

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603049

• Abstract
• PDF (2.130 MB)
• References

Open Access

Digitalization of Industry and Education 03050

Mariya Ostapenko and Vladlena Nazarova

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603050

• Abstract
• PDF (1.751 MB)
• References

Open Access

The choice of Methods of Dynamic Errors Compensation in Motion Control of Elastic Mechatronic Systems 03051

N. K. Kuznetsov, I. A. Iov, A. A. Iov and E. S. Dolgih

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603051

• Abstract
• PDF (1.989 MB)
• References

Open Access

Cutting tool standardization 03052

Maria Ostapenko and Natalya Voronova

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603052

• Abstract
• PDF (1.582 MB)
• References

Open Access

Development of a Lever Mechanism for Loading a Suspended Conveyor 03053

Ildar Kutlubaev, Elena Macko, Igor Usov and Olga Panfilova

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603053

• Abstract
• PDF (1.812 MB)
• References

Open Access

Analysis of the Effectiveness of Quality Management Tools Aimed at Risk-Management of Organizations 03054

Maria Ostapenko and Umida Kholboeva

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603054

• Abstract
• PDF (1.879 MB)
• References

Open Access

On One Method for Constructing a Programmed Trajectory in Problems of Stabilizing a Spacecraft 03055

Alexey Lamotkin, Natalia Misura and Evgenij Mityushov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603055

• Abstract
• PDF (1.680 MB)
• References

Open Access

System Capability Estimation for Various Information Operations Used 03056

Alexander Geyda

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603056

• Abstract
• PDF (1.809 MB)
• References

Open Access

System Analysis and Solution of Energy Efficiency Problems in Machine-Building Production 03057

A.A. Gavrilova, E.A. Matveeva and A.G. Salov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603057

• Abstract
• PDF (1.777 MB)
• References

Open Access

Kinematics of the Maneuver of the Multifunctional Machine for Metallurgical Furnaces 03058

Evgeny Mityushov, Egor Zinovich and Maxim Kosulin

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603058

• Abstract
• PDF (1.866 MB)
• References

Open Access

Modeling of a Railway Sanding System Using Vibration Fluidization 03059

Y.P. Bulavin and P.Y. Konovalov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603059

• Abstract
• PDF (2.011 MB)
• References

Open Access

Routing of Fluidic Circuits Using Skeletons of Polygonal Figures and Compound Splines 03060

Vladimir Romakin

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603060

• Abstract
• PDF (2.145 MB)
• References

Open Access

The Specifics of Calculating the Efficiency of the Continuously Variable Mechanical Transmission with Oscillatory Movement of Internal Links and Force Function Control 03061

Andrey Yurkevich and Larisa Yurkevich

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603061

• Abstract
• PDF (1.843 MB)
• References

Open Access

Determining the Drive Power of the System Controlling the Vibration Amplitude of the Rectifiers for the Continuously Variable Mechanical Transmission with Internal Force Functions 03062

Vladislav Soldatkin, Alexey Tereshin and Andrey Yurkevich

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603062

• Abstract
• PDF (1.827 MB)
• References

Open Access

Electromechanical Transmission of Skid Steer Loader 03063

Alexey Khomichev and Alexandr Volkov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603063

• Abstract
• PDF (1.973 MB)
• References

Open Access

Theoretical Studies of Design Parameters of Machine Elements for Surface Planting of Rice 03064

Ivan Masienko, Sergey Shevchenko and Artem Vasilenko

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603064

• Abstract
• PDF (2.059 MB)
• References

Open Access

Integration of Descriptions of Static Structures at Automation of Design Tasks 03065

Olga Novoselova and Anton Sidorov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603065

• Abstract
• PDF (1.804 MB)
• References

Open Access

Scientific and Technical Aspects of Interference Fits Hydropress Assembling Automation Using Mechatronic Press 03066

Alexander Romanov, Alexey Shchenyatsky and Oxana Zorina

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603066

• Abstract
• PDF (1.795 MB)
• References

Open Access

Fuzzy Fault Detection for Permanent Magnet Synchronous Motor 03067

Alexander Romanov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603067

• Abstract
• PDF (1.924 MB)
• References

Open Access

Computer-Aided Design of Intermittent Kinematics Mechanisms 03068

Alexander Sobolev, Alexei Nekrasov, Michael Arbuzov and Alexei Rivkin

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603068

• Abstract
• PDF (2.487 MB)
• References

Open Access

Predicting the Intensity of Abrasive Wear Based on the Fatigue Hypothesis 03069

Vsevolod Bulychev, Svetlana Golubina, Maxim Semenov and Alexey Korzhikov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603069

• Abstract
• PDF (1.670 MB)
• References

Open Access

Separation of Fine Particles from Gas in Paint-Spraying Booths 03070

Rustem Ya. Bikkulov, Andrey V. Dmitriev, Vadim E. Zinurov and Guzel R. Badretdinova

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603070

• Abstract
• PDF (2.006 MB)
• References

Open Access

Research and Development of Food Industry’s Three-Dimensional Printing 03071

Ramil Nezhmetdinov, Ilya Kovalev, Pavel Melikov and Sergey Sokolov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603071

• Abstract
• PDF (2.251 MB)
• References

Open Access

Development of a Synthesis Method for CNC Machine Tools Remote Monitoring System by Using Web Components 03072

Ilya Kovalev, Nadezhda Chervonnova, Ramir Abdulov and Akram Al Khoury

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603072

• Abstract
• PDF (1.919 MB)
• References

Open Access

Possibilities of Using Frequency Energy Functions in Problems of Dynamics of Machines for Transport and Technological Purposes 03073

Andrey Eliseev, Sergey Eliseev, Nikolay Kuznetsov and Roman Bolshakov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603073

• Abstract
• PDF (1.769 MB)
• References

Open Access

Investigation of the Influence of the Space Orientation of Layers on the Surface Shape Error during Additive Shaping of Products by an Electric Arc in a Protective Gases Environment 03074

Aleksandr Grechukhin and Vadim Kuts

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603074

• Abstract
• PDF (1.776 MB)
• References

Open Access

Results of Simulation of Faults of Starter Batteries 03075

Andrey Puzakov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603075

• Abstract
• PDF (2.230 MB)
• References

Open Access

Application of the Modern Stationary Workholding Systems for Increase Capacity and Quality of Non-Rigid Aircraft Parts 03076

Alexander Khramov, Ilya Semdyankin and Eugene Kiselev

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603076

• Abstract
• PDF (1.999 MB)
• References

Open Access

Separation of Oil-Water Emulsion in Laboratory Setup with U-Shaped Elements 03077

Dang Vinh, Vadim Zinurov, Oksana Dmitrieva and Vitaly Kharkov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603077

• Abstract
• PDF (1.776 MB)
• References

Open Access

Managing Approach the Workload Balance Over Workstations at Stage Process Engineering Part-Making in Multi-Product Production 03078

Sergey Grigoriev, Vitaliy Dolgov, Alexey Podkidyshev and Petr Nikishechkin

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603078

• Abstract
• PDF (1.871 MB)
• References

Open Access

Simulation Modeling Features of Various Machine-Building Enterprise Types 03079

Vitaly Dolgov, Petr Nikishechkin, Sergey Ivashin and Nikita Dolgov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603079

• Abstract
• PDF (1.820 MB)
• References

Open Access

Analysis of the Accident Rate of the Constituent Entities of the Russian Federation 03080

A. G. Shevtsova, V. V. Vasilieva, A. G. Burlutskaya, K. V. Levshina and E. M. Minaeva

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603080

• Abstract
• PDF (1.739 MB)
• References

Open Access

Research Results on Influence of Hydraulic Hammer Design Parameters 03081

Irina Teterin, Igor Ugrumov, Ivan Teterin and Andrey Korneev

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603081

• Abstract
• PDF (1.793 MB)
• References

Open Access

Investigation of the Efficiency of a Granular Filter Based on Cement Clinker 03082

Rashid Sharapov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603082

• Abstract
• PDF (205.3 KB)
• References

Open Access

Innovative Course of Descriptive Geometry 03083

Irina Sergeyeva, Yelena Korotkova, Edward Kolos and Christian Martinez

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603083

• Abstract
• PDF (2.259 MB)
• References

Open Access

Determination of Design Solution for a 6x6 ATV with an Electromechanical Transmission 03084

Kirill Evseev, Aleksey Dyakov, Roman Goncharov and Konstantin Chutkov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603084

• Abstract
• PDF (2.178 MB)
• References

Open Access

Experimental Research of 4x4 ATV Motion Along the Curved Trajectory at the Test Bench 03085

Kirill Evseev, Aleksey Dyakov, Roman Goncharov and Konstantin Chutkov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603085

• Abstract
• PDF (2.586 MB)
• References

Open Access

Selection of Transmission and Electrical Motor Parts for ATVs 03086

Kirill Evseev, Aleksey Dyakov, Roman Goncharov and Konstantin Chutkov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603086

• Abstract
• PDF (2.137 MB)
• References

Open Access

Formation of Moments Influence Matrix in Frame Based on Graph of its Design Scheme 03087

V.А. Monakhov and А.I. Shein

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603087

• Abstract
• PDF (1.786 MB)
• References

Open Access

Automation of Maintaining a Smart Reference Book of Tool Setups for the Development of Control Programs for CNC Machine 03088

Yuri V. Polyanskov, Oleg V. Zheleznov, Aleksey A. Blyumenshteyn and Ilya A. Sergeev

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603088

• Abstract
• PDF (1.779 MB)
• References

Open Access

Improving the Accuracy of Low-Rigid Shaft Lathing in Self-Centering Steady 03089

Oleg Drachev, Boris Gorshkov, Victor Tisenko and Natalia Samokhina

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603089

• Abstract
• PDF (1.902 MB)
• References

Open Access

Methods of Improving the Safety of Drilling Works 03090

Zinur Mukhametzyanov, Aleksey Rubtsov and Petr Kulakov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603090

• Abstract
• PDF (1.912 MB)
• References

Open Access

Selection of a Multi-Functional Controller for the Software and Hardware Complex of an Automated Control System for a Thermal Power Plant 03091

Valeria Dmitrieva, Pavel Sizin and Ilyas Avkhadiev

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603091

• Abstract
• PDF (1.724 MB)
• References

Open Access

The System of Automatic Control of Fuel Supply to the Boiler at the Thermal Power Plant 03092

Valeria Dmitrieva, Pavel Sizin and Dmitry Dzyuin

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603092

• Abstract
• PDF (1.952 MB)
• References

Open Access

Parametric Optimization of Load Bearing Elements for Composite Wing of an Unmanned Aerial Vehicle 03093

Naing Lin Aung, Oleg Tatarnikov and Phyo Wai Aung

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603093

• Abstract
• PDF (1.970 MB)
• References

Open Access

Schedule Planning Proceeding of Transfer Batches in Flexible Automated Lines While Sets are Forming and Limits are Recognized 03094

K.V. Krotov, A.Y. Drozin and E.N. Zaikina

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603094

• Abstract
• PDF (1.767 MB)
• References

Open Access

The Development of a Simulation Model for Assessing the CI/CD Pipeline Quality in the Development of Information Systems Based on a Multi-Agent Approach 03095

Denis Medvedev and Konstantin Aksyonov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603095

• Abstract
• PDF (1.806 MB)
• References

Open Access

Stress-Deformed Condition at Different Angle of Scratch Inclination on Flat Cover of Hatch-Blade 03096

Aleksey Rubtsov, Zinur Mukhametzyanov, Petr Kulakov and Veronika Gracheva

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603096

• Abstract
• PDF (1.811 MB)
• References

Open Access

Features of Soil Tillage during the Cultivation of Spring Barley 03097

Yulia Semenikhina, Sergey Kambulov, Dmitriy Podlesniy and Andrey Boyko

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603097

• Abstract
• PDF (1.879 MB)
• References

Open Access

Development of Toolkit for Formalizing the Programming of Canned Cycles on CNC Machine Tools 03098

Georgi M. Martinov, Liliya I. Martinova and Nikolay N. Fokin

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603098

• Abstract
• PDF (765.1 KB)
• References

Open Access

Increasing Mobility of Tracked Vehicles during Curvilinear Motion by Redistributing Power Flows 03099

I.A. Taratorkin, M.V. Vyaznikov and A.M. Vyaznikov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603099

• Abstract
• PDF (1.733 MB)
• References

Open Access

Determining the Energy Efficiency of Corn, Sun-flower and Soybean Cultivation with the Use of Ridge Technology 03100

Evgeny Zykin, Vladimir Kurdyumov and Svetlana Lazutkina

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603100

• Abstract
• PDF (1.723 MB)
• References

Open Access

Substantiation of the Absolute Velocity of the Soil Thrown by a Spherical Disc of the Roller of a Ridge Roller Planter 03101

Evgeny Zykin, Vladimir Kurdyumov and Svetlana Lazutkina

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603101

• Abstract
• PDF (1.755 MB)
• References

Open Access

Theoretical Substantiation of the Angle of Mounting a Flat Ridge-Forming Disc of a Row Crop Cultivator 03102

Evgeny Zykin, Vladimir Kurdyumov and Svetlana Lazutkina

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603102

• Abstract
• PDF (1.935 MB)
• References

Open Access

Control Algorithm Selection Technique for Vehicle Robotic Transmission in the Urban Cycle 03103

Evgeniy Sarach, Alexander Tsipilev and Igor Smirnov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603103

• Abstract
• PDF (3.104 MB)
• References

Open Access

Revealing a Rational Scheme of Level-By-Level Approximation to the Minimum Route 03104

N.D. Starostin, Е.N. Shipacheva and Ya.A. Zaytsev

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603104

• Abstract
• PDF (1.900 MB)
• References

Open Access

Multi-criteria Optimization in Solving the Problem of Expanding Production Capacity of an Enterprise as a Method of Modeling Strategic Directions for the Development of Production Systems 03105

Olga Shatalova, Ekaterina Kasatkina and Valery Larionov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603105

• Abstract
• PDF (1.829 MB)
• References

Open Access

Features of Use of Rapid Prototyping Technology in the Manufacture of Wax Models of GTE Turbine Blades 03106

R.A. Vdovin

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603106

• Abstract
• PDF (2.313 MB)
• References

Open Access

An Experimental Study of the Thermal State of a Steel Billet during Hot Rolling 03107

Roman Dema, Alexandr Koldin, Vasily Banschicov, Timur Murzabaev, Ruslan Amirov and Elena Suvorova

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603107

• Abstract
• PDF (1.928 MB)
• References

Open Access

Determination of Lubricant Layer Thickness with an Allowance for Oil Absorption Capacity of Contacting Surfaces 03108

Dmitry Terentyev, Sergey Platov, Maxim Kharchenko, Nikolay Ogarkov, Roman Dema and Elena Suvorova

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603108

• Abstract
• PDF (2.011 MB)
• References

Open Access

A Case Study on Implementation of 5S in a Manufacturing Plant to Improve Operational Effectiveness 03109

Ofentse Monnanyana and Kapil Gupta

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603109

• Abstract
• PDF (1.942 MB)
• References

Open Access

Estimation of the Error in Measuring the Coordinates of Vibrating Objects Using Laser Coordinate Measuring Systems. General Provisions 03110

Vladimir Fedyaev, Peter Lyudogovsky and Maria Komkova

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603110

• Abstract
• PDF (1.637 MB)
• References

Open Access

Comparative Analysis of the Selection of Lay-Up Stacking of Polymer Composite Load-Bearing Elements for the Tail Section of Fuselage Structure of the Light Aircraft 03111

Tun Lin Htet and P.V. Prosuntsov

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603111

• Abstract
• PDF (2.157 MB)
• References

Open Access

A Unit for Applying Liquid Fertilizers 03112

Sergey Belousov and Yury Khanin

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603112

• Abstract
• PDF (1.754 MB)
• References

Open Access

Theoretical Study of the Process of Separating the Tobacco Leaf from the Stem 03113

Sergey Papusha and Andrey Domrin

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603113

• Abstract
• PDF (1.636 MB)
• References

Open Access

The Process of Ultra Low-Volume Seed Etching by an Experimental Device 03114

Sergey Papusha, Filipp Kozhura and Valeria Zhadko

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603114

• Abstract
• PDF (1.793 MB)
• References

Open Access

Technical Solution for Complex Layer-by-Layer Tillage with Soil Formation Turnover 03115

Sergey Belousov and Alexander Tsymbal

Published online: 26 October 2021

DOI: https://doi.org/10.1051/matecconf/202134603115

• Abstract
• PDF (1.712 MB)
• References