Open Access
Issue
MATEC Web Conf.
Volume 346, 2021
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2021)
Article Number 01003
Number of page(s) 5
Section Materials Processing Technologies
DOI https://doi.org/10.1051/matecconf/202134601003
Published online 26 October 2021
  1. Grechishnikov V.A., Grigoriev S.N., Maslov A.R., Schirtladze A.G., Instrumentation of integrated engineering plants. Thin Knowledge-Intensive Technologies LLC. Staryj Oskol, 2018g. [Google Scholar]
  2. Semenchenko I. I., Matyushin V. M., Sakharov G. N., Designing metal cutting tools. M.: Mechanical engineering, 1963. 952 s. [Google Scholar]
  3. Boriskin O. I., Stakhanov N. G., Yakushenkov A. V., Involute worm cutter with hard-alloy racks. Domestic and foreign experience of quality assurance in mechanical engineering: All-Russian scientific and technical conference. Tula, 2019g. pp. 116-118. [Google Scholar]
  4. Chulin I.V., Improvement of resistance of prefabricated hard alloy cutters for treatment of railway points. Dissertation of candidate of technical sciences. Moscow, 2011g. [Google Scholar]
  5. Isaev A.V., Development of prefabricated cutters with replaceable polyhedral hard alloy plates located on the helical surface for processing of blanks with shaped profile. Dissertation of candidate of technical sciences. Moscow, 2012g. [Google Scholar]
  6. Grechishnikov V.A., Isaev, A.V., Romanov V. B., Method of forming profile of generatrix of initial tool surface of prefabricated cutters with cutting plates located along screw line. Bulletin of MSTU Stankin. Moscow, 2015g. pp. 8-12. [Google Scholar]
  7. Chevychelov S. A., Improved design efficiency of hyperbolic cutters by computer simulation of rail reprofiling process. Dissertation of candidate of technical sciences. Orel, 2005g. [Google Scholar]
  8. Nichkov A.G., Bases of a complex research of process of gear milling and optimization of its design and process parameters in the simple and combined schemes of cutting of cogwheels worm mills. Dissertation of the Doctor of Engineering. Tula, 1991g. [Google Scholar]
  9. Artamonov E.V. Durability and working capacity of retrofittable hard alloy blades of assembly cutting tools. – Tyumen’: TyumGNGU, 2003. – 192 s. ISBN 5-88465-416-2 [Google Scholar]
  10. Smirnov N.N., Gear milling by much screw worm mills with different schemes of cutting. Dissertation of candidate of technical sciences. Kiev, 1982g. [Google Scholar]
  11. Medvedickov S.N., High-performance gear cutting by mills. M.: Mechanical engineering, 1981. 106 s. [Google Scholar]
  12. Srinivasan N., Shunmugam M. S., Limiting conditions in gear shaping for corrected involute gears. International Journal of Machine Tool Design and Research. v.23, Issue 4, 1983, pp. 227-235. [Google Scholar]
  13. T. Tokawa, Y. Nishimura, Y. Nakamura, High productivity dry hobbing system, J. Mitsubishi Heavy Ind. v.38(1). pp. 27-31. (2001) [Google Scholar]
  14. Papsheva N.D., Akushskaya O.M., Improving the efficiency of the process of gear cutting, Engineering journal of Don. 36 (2015) 54. [Google Scholar]
  15. W. Liu, D. Ren, S. Usui, J. Wadell, T. D. Marusich, A gear cutting predictive model using the finite element method, J. CIRP. v.8 pp. 51-56. (2013) [Google Scholar]
  16. Artamonov E.V., Pomigalova T.E., Tveryakov A.M., Uteshev M.Kh., Fracture mechanics and strength of replaceable hard alloy cutting inserts. Tyumen.: TyumGNSU, 2013. 148 s. [Google Scholar]
  17. Artamonov E.V., Kireev V.V., Zyryanov V.A., An interlocking side mill with retrofittable carbide blades for processing of coarse-pitch tooth wheels, MATEC Web of Conferences 224. ICMTMTE – 2018. pp. 1-5. (2018) [Google Scholar]
  18. Artamonov E.V., Kireev V.V., Zyryanov V.A., Lay-out of cutting blades in an assembly basic rack of a counterpart rack for hob gears, IOP Conference Series: Materials Science and Engineering – 2019. pp. 1-6. (2019) [Google Scholar]
  19. Artamonov E.V., Kireev V.V., Zyryanov V.A., Increase of efficiency of tooth cutting by creation of prefabricated cutters with replaceable cutting hard alloy plates. News of Southwestern State University. Kursk, 2020g. pp. 35-51. [Google Scholar]
  20. Artamonov E.V., Kireev V.V., Zyryanov V.A., Application of the group scheme of cutting when processing coarse-grain cogwheels, IOP Conference Series: Materials Science and Engineering – 2020. pp. 1-5. (2020) [Google Scholar]
  21. Artamonov E.V., Kireev V.V., Zyryanov V.A., Prefabricated worm cutter with group cutting scheme, Pat. 2720011 Russian Federation, MPK B23F21/16. Patent holder Federal State Budgetary Institution for Higher Education “Tyumen Industrial University”, 2020g. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.