Open Access
Issue
MATEC Web Conf.
Volume 346, 2021
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2021)
Article Number 03107
Number of page(s) 8
Section Mechanical Engineering
DOI https://doi.org/10.1051/matecconf/202134603107
Published online 26 October 2021
  1. Matsuo A., Rolling Technology and Theory for the Last 100 Years: The Contribution of Theory to Innovation in Strip Rolling Technology, ISIJ International, 2015, Volume 55, Issue 1, 89-102. [CrossRef] [Google Scholar]
  2. Koldin, A.V. Modeling of the thermal state of the hot rolled strip in the accelerated cooling process part I: heat transfer model / A.V. Koldin, R.R. Dema, M.V. Nalimova, E. Mihailov, A.N. Shapovalov, M.V. Kharchenko // Journal of Chemical Technology and Metallurgy. - 2019. - T. 54. - № 6. - C. 1330-1336. [Google Scholar]
  3. Koldin, A.V. Modeling of the thermal state of a hot rolled strip in an accelerated cooling process part 2: a calculation of the thermal field of the strip. results and conclusions / A.V. Koldin, R.R. Dema, M.V. Nalimova, A.N. Shapovalov, E. Mihailov // Journal of Chemical Technology and Metallurgy. - 2020. - T. 55. - № 1. - C. 171-181. [Google Scholar]
  4. Nekit V., Platov S., Krasnov M. The nature of the change of the surface temperature of the workpiece during hot rolling of pipe steel, MATEC Web of Conferences, 224(45):01104. [Google Scholar]
  5. Tataru, A.S. Research and development of technology for the production of hot-rolled high-strength auto-sheet steel from two-phase ferrite-martensitic steels with specified mechanical properties: dis. ... Cand. tech. Sciences / A.S. Tataru; NUST MISIS. Magnitogorsk, 2018. [Google Scholar]
  6. ShilyaevP.V., DenisovS.V., StekanovP.A., KornilovV.L., KrasnovM.L., UrtsevV.N., KaptsanF.V., ShmakovA.V., SchastlivtsevV.M., GornosturevY.N., LobanovM.L., Platov S.I. Production of new-generation rolled steel under conditions of magnitogorsk iron and steel company, Metallurgist.(безномеpа) 2021. 1-26. [Google Scholar]
  7. Dema, R.R., Amirov, R.N., Latypov, O.R., Mathematical model for assessing the management of quality parameters of hot-rolled strips according to the criterion of local thickness variation, Materials Today: Proceedings, 2019, 19, cтp. 2417–2421 [CrossRef] [Google Scholar]
  8. NekitV.A., PlatovS.I., KurbakovI.A., Golev A.D. Experimental Study of Lead and Lag in Rolling, Bulletin of the Magnitogorsk State Technical University. G.I. Nosov. 2015. No. 1 (49). S. 52-54. [Google Scholar]
  9. Kharchenko, M.V. Energy reduction technologies based on the lubricant supply in the roll contact system “quarto” during the hot strip rolling // M.V. Kharchenko, R.R. Dema, V.I. Bilichenko // Materials Science Forum. - 2016. Vol. 870. P. 446–453. [CrossRef] [Google Scholar]
  10. Dema, R.R. Dependents of energy consumption at the wide-strip hot rolling on a mode option of rolls lubrication modeling // R.R. Dema, O.B. Kalugina, N.Sh. Tyuteryakov // International Conference on Industrial Engineering, Applications and Manufacturing, ICIEAM 2017. - P. 8076435. [Google Scholar]
  11. ShatalovR.L., Medvedev V.A. “Regulation of the Rolling Temperature of Blanks of Steel Vessels in a Rolling-Press Line for the Stabilization of Mechanical Properties,” Metallurgist, vol. 63, no. 9-10, pp1071-1076, 2020 [Google Scholar]
  12. Trishevskii, O.I. and Saltavets, N.V., Mathematical model of the thermal state of strip in rolling, Steel Transl., 2009, vol. 39, no. 2, pp. 158–160. [CrossRef] [Google Scholar]
  13. BelskiyS.M., Yankova S., ChuprovV.B., BakhaevK.V., StoyakinA.O., Temperature field of stripes under hot rolling, Journal of Chemical Technology and Metallurgy, 50, 6, 2015, 613-616 [Google Scholar]
  14. Chashchin V.V. Controlled Cooling of Strip Coils on the Conveyer of a Hot-Rolling Mill, Steel in Translation volume 48, pages388–392 (2018). [CrossRef] [Google Scholar]
  15. LiL.J., XieH.B., Liu X.,. Liu T.W, WangE.R., Jiang Z.Y. Numerical Simulation of Strip Shape of High-Strength Steel during Hot Rolling Process, Key Engineering Materials (Volume 830)Pages:43-51 (2020) [CrossRef] [Google Scholar]
  16. Kawalla R., GrechnikovF.V., Nosova E.A. and Erisov Y.A. Development of a Mathematical Model of Plate Rolling on Hot Reversing Mills, Engineering Materials, Vol. 746, (2017), Pages: 48-55. [Google Scholar]
  17. Kharchenko, M.V. Energy reduction technologies based on the lubricant supply in the roll contact system “quarto” during the hot strip rolling // M.V. Kharchenko, R.R. Dema, V.I. Bilichenko // Materials Science Forum. - 2016. Vol. 870. P. 446–453. [CrossRef] [Google Scholar]
  18. Dema, R.R. Dependents of energy consumption at the wide-strip hot rolling on a mode option of rolls lubrication modeling // R.R. Dema, O.B. Kalugina, N.Sh. Tyuteryakov // International Conference on Industrial Engineering, Applications and Manufacturing, ICIEAM 2017. - P. 8076435. [Google Scholar]
  19. EfremovD.B., GerasimovaA.A., Gorbatyuk S.M, Chichenev N.A. “Study of kinematics of elastic-plastic deformation for hollow steel shapes used in energy absorption devices,” CIS Iron and Steel Review, vol. 18, pp30-34, 2019 [CrossRef] [Google Scholar]
  20. Tyuteryakov, N.S. Simulation and calculation of temperature distribution in roll fittings’ guides in contact with the rolled strip // Procedia Engineering “2nd International Conference on Industrial Engineering, ICIE 2016” - 2016. - P. 667–673. [Google Scholar]
  21. SosedkovaM.A., GrigorenkoA.S., Radionova L.V. Mathematical model for calculating the temperature of the metal in a hot-sheet rolling mill, Bulletin of the Magnitogorsk State Technical University named after M.V. G.I. Nosov, Vol. 18 No. 4 2020, 24-31.[22] C. G. Sun, H. N. Han, J. K. Lee, Y. S. Jin, S. M. Hwang, A Finite Element Model for the Prediction of Thermal and Metallurgical Behavior of Strip on Run-out-table in Hot Rolling, ISIJ International, 2002 Vol. 42, No. 4, p. 392–400. [Google Scholar]
  22. Kenichi Yanagi, Prediction of Strip Temperature for Hot Strip Mills, Transactions of the Iron and Steel Institute of Japan, 1976 Volume 16 Issue 1 11-19. [CrossRef] [Google Scholar]
  23. O.I. Trishevskii, N.V. Saltavets, Thermal state of strip in ultrafast cooling, Steel in Translation volume 45, pages443–446 (2015). [CrossRef] [Google Scholar]
  24. A.Y. Albagachiev, A.M. Keropyan, A.A. Gerasimova, O.A. Kobelev, “Determination of rational friction temperature in lengthwise rolling,” CIS Iron and Steel Review, 19, pp33-36, 2020 [CrossRef] [Google Scholar]
  25. Latypov, O.R., Platov, S.I., Dema, R.R., Urtsev, N.V. Determination of the reduction coefficients in a continuous finishing group of stands in a hot rolling mill using artificial neural network, IOP Conference Series: Materials Science and Engineering, 2020, 966(1), 012101 [CrossRef] [Google Scholar]
  26. Vorozhishchev, A.N., Dema, R.R., Kazakova, T.V. Modeling of a Thermal Massive Body Depending on the Cooling Liquid Volume, as Exemplified by Rolls for a Hot-rolling Mill, Procedia Engineering, 2016, 150, cтp. 1007–1012 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.