Open Access
Issue
MATEC Web Conf.
Volume 346, 2021
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2021)
Article Number 01007
Number of page(s) 6
Section Materials Processing Technologies
DOI https://doi.org/10.1051/matecconf/202134601007
Published online 26 October 2021
  1. Ozdemir, M., Dilipak, H. & Bostan, B. Experimental Investigation of Deformation and Spring-Back and Spring-Go Amounts of 1.5415 (16MO3) Sheet Material. Metallogr. Microstruct. Anal. 9 (2020) [Google Scholar]
  2. A. A. Salem. Automatic Tool Selection in V-bending Processes by Using an Intelligent Collision Detection Algorithm. 2nd International Conference on Design and Manufacturing Engineering (ICDME2017). IOP Conf. Series: Materials Science and Engineering 239 (2017) [Google Scholar]
  3. Piotr Kędzierski and Arkadiusz Popławski. Development of test device for springback study in sheet metal bending operation” , AIP Conference Proceedings 2078 (2019) [Google Scholar]
  4. Mackerle, J. Finite element analyses and simulations of sheet metal forming processes, Engineering Computations, Vol. 21 No. 8 (2004) [Google Scholar]
  5. Sutasn Thipprakmas. Spring-back factor applied for V-bending die design. 8th International Conference on Manufacturing, Machine Design, and Tribology (ICMDT). Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol.14, No.3 (2020) [Google Scholar]
  6. Ozdemir, M. Optimization of Spring Back in Air V Bending Processing Using Taguchi and RSM Method. MECHANIKA. Volume 26(1) (2020) [Google Scholar]
  7. Vuong Gia Hai et al. A study on experiment and simulation to predict the spring-back of SS400 steel sheet in large radius of V-bending process. Mater. Res. Express 7 (2020) [Google Scholar]
  8. Souichiro Nishino, Kunio Ohya. Reducing Work Load and Increasing Dimensional Accuracy in Parts for Bending of High-Strength Steel Sheets for Automobiles. Materials Transactions, Vol. 52, No. 3. (2011) [Google Scholar]
  9. Rudman L. I. Handbook of the stamp designer: sheet stamping. (Moscow: Mashinostroenie, 1988) [Google Scholar]
  10. GOST 19903-2015. Hot-rolled sheet metal. Assortment (Standartinform, Moscow, 2016) [Google Scholar]
  11. GOST 19904-90. Cold-rolled sheet metal. Sortament. (IPK Publishing House of Standards, Moscow, 1999) [Google Scholar]
  12. DIN 6935-2011. Cold bending of flat rolled steel (2011) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.