Open Access
| Issue |
MATEC Web Conf.
Volume 346, 2021
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2021)
|
|
|---|---|---|
| Article Number | 02016 | |
| Number of page(s) | 5 | |
| Section | Materials Science | |
| DOI | https://doi.org/10.1051/matecconf/202134602016 | |
| Published online | 26 October 2021 | |
- Y. Chen, Automotive Transmissions (Springer Singapore, Singapore, 2021). [CrossRef] [Google Scholar]
- N. B. Pugacheva, Y. V. Khudorozhkova, E. B. Trushina, A. V. Gerasimova, and N. P. Antenorova, Reasons for Cracking of Die-Forged CuZn34Mn3Al2FeNi Brass Blanks, Diagnostics, Resour. Mech. Mater. Struct. 4, 61 (2017). [Google Scholar]
- N. B. Pugacheva, A. V. Lebed, and A. S. Ovchinnikov, Ways to Improve LMtsAZHN Complex Alloyed Brass Tubes Manufacturing, in Innovation in Materials Science and Metallurgy. 2nd International Interactive Research-to-Practice Conference Proceeding, Ekaterinburg (2012), pp. 209–211. [Google Scholar]
- M. V. Myasnikova, S. V. Smirnov, and N. B. Pugacheva, Simulation of Silicide Damage in Brass under Plastic Deformation, Fundam. Res. 9, 667 (2012). [Google Scholar]
- M. Kondracki, J. Gawro´nski, and J. Szajnar, Role of the Intermetallic Phases in Technological Process of Fixture Brasses, J. Mater. Process. Technol. 162–163, 332 (2005). [Google Scholar]
- W. Chen, Y. Jia, J. Yi, M. Wang, B. Derby, and Q. Lei, Effect of Addition of Ni and Si on the Microstructure and Mechanical Properties of Cu–Zn Alloys, J. Mater. Res. 32, 3137 (2017). [Google Scholar]
- S. Chen, X. Mi, G. Huang, and Y. Li, Effect of Ce Addition on Microstructure and Properties of Cu-Zn-Mn-Al- Based Alloy, J. Mater. Res. 32, 3137 (2017). [Google Scholar]
- S. W. Zhang, Recent Developments of Green Tribology, Surf. Topogr. Metrol. Prop. 4, 023004 (2016). [Google Scholar]
- H. Mindivan, H. Cimenoglu, and S. E. Kayali, Microstructures and Wear Properties of Brass Synchroniser Rings, Wear 254, 532 (2003). [Google Scholar]
- A. Waheed and N. Ridley, Microstructure and Wear of Some High-Tensile Brasses, J. Mater. Sci. 29, 1692 (1994). [Google Scholar]
- X. Wang, J. Jie, S. Liu, Z. Dong, G. Yin, and T. Li, Growth Mechanism of Primary Ti5Si3 Phases in Special Brasses and Their Effect on Wear Resistance, J. Mater. Sci. Technol. 61, 138 (2021). [Google Scholar]
- H. Li, J. Jie, Q. Zhang, and T. Li, Effect of Annealing Treatment on the Microstructures, Mechanical, and Wear Properties of a Manganese Brass Alloy, J. Mater. Res. 31, 1491 (2016). [Google Scholar]
- H. Li, J. Jie, S. Liu, Y. Zhang, and T. Li, Crystal Growth and Morphology Evolution of D8 8 (Mn, Fe) 5 Si 3 Phase and Its Influence on the Mechanical and Wear Properties of Brasses, Mater. Sci. Eng. A 704, 45 (2017). [Google Scholar]
- M. Zare and M. Ketabchi, Effect of Chromium Element on Transformation, Mechanical and Corrosion Behavior of Thermomechanically Induced Cu–Al–Ni Shape-Memory Alloys, J. Therm. Anal. Calorim. 127, 2113 (2017). [Google Scholar]
- S. A. Saltykov, Stereometric Metallography (Stereology of Metallic Materials) (Moscow: Metallurgy, 1976). [Google Scholar]
- L. Bie, X. Chen, P. Liu, T. Zhang, and X. Xu, Morphology Evolution of Mn5Si3 Phase and Effect of Mn Content on Wear Resistance of Special Brass, Met. Mater. Int. 26, 431 (2020). [Google Scholar]
- Y. P. Kozyrev and E. B. Sedakova, The Effect of the Process of Directed Aggregation of Particles on the Characteristics of Polymer Antifriction Nanocomposites, J. Mach. Manuf. Reliab. 39, 375 (2010). [Google Scholar]
- N. B. Pugacheva, Structure of Industrial α + β-Brass, Met. Sci. Heat Treat. Met. 23 (2007). [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.