MATEC Web Conf.
Volume 346, 2021International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2021)
|Number of page(s)||7|
|Section||Materials Processing Technologies|
|Published online||26 October 2021|
Additive Technology Methods for Manufacturing Permanent Magnets
National University of Science and Technology “MISIS”, street the Lenin prospect,4, Moscow, 119049, Russia
* Corresponding author: email@example.com
The paper presents the results of studying the possibility of using the selective laser melting method for production of permanent magnets. This process allows to manufacture not only product models and prototypes, but also finished functional products by adding material layer by layer and bonding particles and layers to each other. We have considered the application areas of selective laser melting (SLM) based on powders obtained by different methods for the study. In addition, we have analyzed the traditional magnetic alloy casting technology, studied magnetic materials, and compared the powder magnet properties with standard data. We have found that the parameters of powders obtained by gas atomization are qualitatively superior to those of powders obtained using other methods, whereas the resulting magnets meet the requirements for magnets. Based on the 25Kh15KA alloy powder atomized by gas atomization, a SLM plant allows to manufacture permanent magnets with a material density of 7.59–7.55 g/cu.cm, which meets the requirements recommended by the State Standard GOST 24897-81, and to obtain the magnet properties that can be achieved using traditional metallurgical technologies.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.