Open Access
Issue |
MATEC Web Conf.
Volume 346, 2021
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2021)
|
|
---|---|---|
Article Number | 03071 | |
Number of page(s) | 8 | |
Section | Mechanical Engineering | |
DOI | https://doi.org/10.1051/matecconf/202134603071 | |
Published online | 26 October 2021 |
- DISCOV3RY 2.0 COMPLETE // STRUCRUR3D PRINTING – [2020, https://www.structur3d.io/discov3ry-2-complete] [Google Scholar]
- Choc Creator V2.0 Plus // TOP 3D SHOP – [2020, https://top3dshop.ru/kupit-3d-printer/choc-creator-v2-plus-ohlad.html] [Google Scholar]
- MartinovaL.I., KozakN.V., Kovalev I.A. and Ljubimov A.B. Creation of CNC system’s components for monitoring machine tool health. Int J Adv Manuf Technol (2021). https://doi.org/10.1007/s00170-021-07107-1 [Google Scholar]
- Pushkov R., Martinova L. and Evstafieva S. Extending functionality of the control system using MTConnect data collection standard. ICMTMTE 2020, IOP Conf. Series: Materials Science and Engineering 971 (2020) 042080. doi: 10.1088/1757-899X/971/4/042080 [CrossRef] [Google Scholar]
- Martinov G., Pushkov R., Martinova L., Kozak N. and Evstafieva S., 2020. Approach to development of HMI screens for CNC with dynamic kinematics. ICMTMTE 2020, MATEC Web of Conferences 329, 03026. p.1-6. doi: 10.1051/matecconf/202032903026 [CrossRef] [EDP Sciences] [Google Scholar]
- Martinova, L., Obukhov, A. and Sokolov S. Practical Aspects of Ensuring Accuracy of Machining on CNC Machine Tools within Framework of “Smart Manufacturing”. 2020 International Russian Automation Conference (RusAutoCon). IEEE, 2020. Page(s): 898 - 902. [CrossRef] [Google Scholar]
- Martinov, G., Kovalev, I. and Grigoriev, A., 2019. Approach to Building an Autonomous Cross-platform Automation Controller Based on the Synthesis of Separate Modules. In: International Russian Automation Conference. Sochi, Russia. doi: 10.1007/978-3-030-39225-3_15 [Google Scholar]
- Martinov, G. M., Pushkov, R. L. and Evstafieva, S. V. (2020). Collecting diagnostic operational data from CNC machines during operation process. In IOP Conference Series: Materials Science and Engineering (Vol. 709, No. 3, p. 033051). IOP Publishing. doi:10.1088/1757-899X/709/3/033051 [CrossRef] [Google Scholar]
- Martinova, L., Sokolov, S. and Babin, M. (2020). Organization of Process Equipment Monitoring. In: 2019 XXI International Conference Complex Systems: Control and Modeling Problems (CSCMP). Samara: IEEE. doi:10.1109/CSCMP45713.2019.8976506 [Google Scholar]
- Martinov, G., Issa, A. and Martinova, L. (2019). Controlling CAN Servo Step Drives and Their Remote Monitoring by Using Protocol OPC UA. In: 2019 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon). Vladivostok: IEEE, pp.1-5. doi: 10.1109/FarEastCon.2019.8934338 [Google Scholar]
- Martinov, G., Lyubimov, A. and Khoury, A. (2019). Development of Motion Controller Based on ARM Microcomputers by Supporting Different Strategies of Controlling CAN Servo Drives. In: 2019 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon). Vladivostok: IEEE, pp.1-6. doi: 10.1109/FarEastCon.2019.8934149 [Google Scholar]
- Martinov G. M., NikishechkinP.A., Grigoriev A.S. and Chervonnova N. Yu. (2019). Organizing Interaction of Basic Components in the CNC System AxiOMA Control for Integrating New Technologies and Solutions // Automation and Remote Control, 2019, Vol. 80, No. 3, pp. 584–591. https://doi.org/10.1134/S0005117919030159 [CrossRef] [Google Scholar]
- Pushkov, R., Martinova, L. and Evstafieva, S. (2018). Extending Functionality of Control System by Adding Engraving Capabilities. In: 2018 International Russian Automation Conference (RusAutoCon), Sochi, Russia. Sochi: IEEE. pp. 709–714. https://doi.org/10.1109/RUSAUTOCON.2018.8501673 [Google Scholar]
- Roman Pushkov, Evgeniy Salamatin, Svetlana Evstafieva (2018). Method of developing parametric machine cycles for modern CNC systems using high-level language. In: MATEC Web Conf. Volume 224, 2018. International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018). Sevastopol, Russia, September 10-14, 2018. pp.1-7 https://doi.org/10.1051/matecconf/201822401116 [Google Scholar]
- Georgi M. Martinov, Anna V. Stas, Oleg A. Kudinov (2018). The approach of creating a particular postprocessor and using CNC measuring cycles. In: MATEC Web Conf. Volume 224, 2018. International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018). Sevastopol, Russia, September 10-14, 2018. pp.1-7 https://doi.org/10.1051/matecconf/201822404023 [Google Scholar]
- Georgi M. Martinov, Akram Al Khoury, Ahed Issa (2018). An approach of developing low cost ARM based CNC systems by controlling CAN drives. In: MATEC Web Conf. Volume 224, 2018. International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018). Sevastopol, Russia, September 10-14, 2018. pp.1-6 https://doi.org/10.1051/matecconf/201822401020 [Google Scholar]
- Kovalev I, Kvashnin D., Chervonnova N. and Nikich A. Application of agile methodology at industrial manufacturing as part of the Industry 4.0. ICMTMTE 2020, IOP Conf. Series: Materials Science and Engineering 971 (2020) 052034. doi: 10.1088/1757-899X/971/5/052034 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.