Issue |
MATEC Web Conf.
Volume 346, 2021
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2021)
|
|
---|---|---|
Article Number | 02004 | |
Number of page(s) | 7 | |
Section | Materials Science | |
DOI | https://doi.org/10.1051/matecconf/202134602004 | |
Published online | 26 October 2021 |
Composite Metal-Matrix Alloys Based on Ni-Al for Obtaining Wear-Resistant Coatings by Electric Spark Deposition
1 Institute for Materials Technology, Khabarovsk Research Centre at the Far Eastern Branch of the Russian Academy of Sciences, Khabarovsk, Russia
2 Pacific National University, Khabarovsk, Russia
* Corresponding author: jenya_1992g@mail.ru
The paper presents the research results on produsing by the method of liquid-phase self-propagating high-temperature synthesis (SHS) the composite metal-matrix alloys intended for the obtaining of wear-resistant coatings by electric spark deposition (ESD). Oxides NiO, Cr2O3 and mineral concentrate ZrO2 were used as a melting charge. Alloys based on the Ni-Al system with aluminides of complex composition containing Cr and Zr were obtained by means of the alumothermic SHS reaction. Wear-resistant coatings were formed on steel 45 by the ESD method by means of the newly obtained alloys,. The maximum wear resistance of the coatings was obtained using the alloys containing Cr (wt% 18) and Zr (wt% 1.9).
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.