EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 346 (2021) MATEC Web Conf., 346 (2021) 03051 References
Open Access
Issue
MATEC Web Conf.
Volume 346, 2021
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2021)
Article Number 03051
Number of page(s) 9
Section Mechanical Engineering
DOI https://doi.org/10.1051/matecconf/202134603051
Published online 26 October 2021
  1. Svinin V.M. Milling with modulated cutting speed: monograph (Publ. ISTU, Irkutsk, 207) [Google Scholar]
  2. R.H. Sharipov, The calculation of the loads acting on the construction of the EKG-5 excavator, Mining informational and analytical bulletin (scientific and technical journal), v. 6, pp. 113–116 (2010) [Google Scholar]
  3. Lagunova Yu.A., KomissarovA.P., V.S. Shestakov et al, Mechanical engineering. Mining machines. T IV-24 (Mechanical engineering, Moscow, 2011) [Google Scholar]
  4. A.V. Savilov, A.S. Pyatykh, Vibration effect on accuracy and quality of hole surface under drilling, Vestnik ISTU, v. 12(83), pp. 103–111 (2013) [Google Scholar]
  5. StepanovA.G., Kornyakov M.V. Machine Dynamics (Publ. ISTU, Irkutsk, 2014) [Google Scholar]
  6. IlyinS.R., IlinaS.S., SamusyaV.I., Mechanics of mine hoist: Monograph (National Mining University, Dnepropetrovsk, 2014) [Google Scholar]
  7. Poderny R.Yu. Mechanical equipment of mine. Book for university (Mining Media Group, Moscow, 2011) [Google Scholar]
  8. A.A. Gubenko, V.P. Svinarchuk, Review and analysis of design parameters of elastic-damping devices, Scientific Annals of MGGU, v. 1, pp. 12–16 (2011) [Google Scholar]
  9. H.N. Sultonov, L.I. Kantovich, Improving the reliability of excavator travel mechanism drive gear - face power shovel, Coal, v. 6, pp. 30–32 (2014) [Google Scholar]
  10. I.L. Pastoev, I L, E.P. Zelenovskii, Active damping dynamic load in traction chains front planing machine, Depon. Manuscript Mining informational and analytical bulletin (scientific an technical journal), v. 1 (1993) [Google Scholar]
  11. N.K. Kuznetsov, I.A. Iov, A.A. Iov, E.S. Dolgih, Development and research of elastic-damping device with variable stiffness, IOP Conference Series: Materials Science and Engineering, 971, 042016, DOI 10.1088/1757-899X/971/4/042016. (2020) [Google Scholar]
  12. Bortsov Yu.A., SokolovskyG.G., Automated electric drive with elastic connections (Energoatomizdat, St. Petersburg, 1992) [Google Scholar]
  13. Burgin B. Sh. Analysis and synthesis of two-mass electromechanical systems (Novosibirsk Electrotechnical Institute, Novosibirsk, 1992) [Google Scholar]
  14. Pyatibratov G.Ya. Development of the theory and practice of effort control in electromechanical systems with elastic connections, dissertation (South Russian State Technical University, Novocherkassk, 2000) [Google Scholar]
  15. A.V. Lyakhomsky, S.N. Reshetnyak, Methods for studying the correction of coordinates in electric drives of mine hoist, Electrica, 4, pp. 33–37 (2009) [Google Scholar]
  16. LyakhomskiyA.V., FashilenkoV.N., Control of electromechanical mining machine systems (Moscow State Mining University, Moscow, 2004) [Google Scholar]
  17. V.I. Vasiliev, Ways of reducing dynamic loads in the cable of mine hoist by systems of automatically controlled safety braking, Steel ropes: Collection of articles. scientific. tr. MAISK, Odessa, Astroprint, v. 8, pp. 18–29 (2010) [Google Scholar]
  18. S.V. Solov’ev, D.A. Kuziev, Dependence of dynamics of the working process of a career dragline on elastic-damping parameters of its traction mechanism, Coal, 2, pp. 60–62 (2014) [Google Scholar]
  19. V.V. Alekseev, A.P. Emelyanov, A.E. Kozyaruk, Analysis of the dynamic performance of a variable-frequency induction motor drive using various control structures and algorithms, Russian Electrical Engineering, v. 87(4), pp. 181–188 (2016) [Google Scholar]
  20. Krut’ko P.D. Inverse dynamics problems of control systems: Linear models (Science, Moscow, 1987) [Google Scholar]
  21. N.K. Kuznetsov, E.S. Dolgih, I.A. Iov, Synthesis of optimal structures of the motion controller of elastic mechatronic systems, International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon), Vladivostok, Russia, pp. 1–6, (2019) doi: 10.1109/FarEastCon.2019.8934439 [Google Scholar]
  22. N.K. Kuznetsov, I.A. Iov, E.S. Dolgih, Development and Research of Motion Control Algorithms of Elastic Mechatronic Systems, International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon), Vladivostok, Russia, pp. 1–5, (2020) doi: 10.1109/FarEastCon50210.2020.9271077 [Google Scholar]
  23. N.K. Kuznetsov, I.A. Iov, E.S. Dolgih, Structural-parametric synthesis of the electric drive control system of excavators digging mechanisms based on the inverse dynamic problems concept, Proceed. of the 6th International Conference on Industrial Engineering, 1, pp. 647–656 (2020). [Google Scholar]
  24. KrasovskyA.A., PospelovG.S., Fundamentals of automation and technical cybernetics (Gosenergoizdat, Moscow, 1962) [Google Scholar]
  25. Dorf R., Bishop R., Modern control systems (Eighth Edition, Addison-Wesley, 2002) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.