EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 346 (2021) MATEC Web Conf., 346 (2021) 03007 References
Open Access
Issue
MATEC Web Conf.
Volume 346, 2021
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2021)
Article Number 03007
Number of page(s) 8
Section Mechanical Engineering
DOI https://doi.org/10.1051/matecconf/202134603007
Published online 26 October 2021
  1. S. I. Kambulov, V. P. Maksimov, Yu. A. Tsarev, E. M. Zubrilin, Energy-saving technologies of grain crop cultivation Scientific life, v. 2, pp. 19–26 (2019). [Google Scholar]
  2. E. I. Trubilin, K. A. Sokht, V. I. Konovalov, O. V. Danyukova, Rotary disk working bodies – as a basic element in combined aggregates for soil processing and sowing, Multidisciplinary network electronic scientific journal of Kuban State Agrarian University, v. 91, pp. 465–497 (2013). [Google Scholar]
  3. E. I. Trubilin, К. A. Sokht, V. I. Konovalov, S. V. Belousov, Disk harrows and huskers in the system of basic and pre-sowing tillage. Problems and ways to solve them, Multidisciplinary network electronic scientific journal of Kuban State Agrarian University, v. 88, pp. 662–671 (2013). [Google Scholar]
  4. G. G. Maslov, V. T. Tkachenko, E. M. Yudina, M. R. Kadyrov, S.A. Kalitko, The improvement of the technology of winter wheat grain production for the purpose of energy saving, Biosciences Biotechnology Research Asia, v. 12(3), pp. 2071–2080 (2015). [Google Scholar]
  5. Yu. К. Kastidi, D. A. Krepyshev, Economic efficiency of the provision with agricultural machinery of commodity producers of Krasnodar Territory, Proceedings of Ku-ban State Agrarian University, v.28, pp. 39–42 (2011). [Google Scholar]
  6. A. Yu. Nesmiyan. Technical characteristics and agrotechnical performance rates of tillage units, Tractors and agricultural machinery, v. 6, pp.58-64 (2017). [Google Scholar]
  7. A. P. Sokolova, Yu. К. Kastidi, G. F. Bershitskaya, M. E. Trubilin, Influence of provision with machinery on economic rates of plant growing, Agricultural mechanical engineer, v. 2, pp. 22–23 (2015). [Google Scholar]
  8. A. I. Trubilin, Yu. I. Bershitsky, Yu. К. Kastidi, Theoretical aspects of efficiency in-crease of agricultural machinery use in plant growing, Proceedings of Kuban State Agrarian University, v. 17, pp. 7–11 (2009). [Google Scholar]
  9. G. G. Maslov, E.I. Trubilin, E.V. Truflyak, Parameters optimization for multifunc-tional aggregates in plant growing mechanization, Research Journal of Pharmaceuti-cal, Biological and Chemical Sciences, v. 7(3), pp. 1919–1926 (2016). [Google Scholar]
  10. G.G. Maslov, E.M. Yudina, A.S. Serguntsov, R.O. Evglevsky, Rational system of multifunctional aggregates for mechanization of plant growing, Research Journal of Pharmaceutical, Biological and Chemical Sciences, v. 9(5), pp. 1177–1185 (2018). [Google Scholar]
  11. V. B. Rykov, S. I. Kambulov, E. I. Trubilin, YU. K. Kastidi, System of energy criteria in the justification of technical units for field production, E3S Web of Conferences, v. 196, p. 01008 (2020). [Google Scholar]
  12. V. I. Khizhnyak, A. Yu. Nesmiyan, V. V. Shchirov, Development of technical units for surface tillage, Bulletin of Agrarian Science of Don, v. S4, pp. 34–39 (2018). [Google Scholar]
  13. G. G. Maslov, E. M. Yudina, D. A. Ushakov, G. E. Samurganov, Modernization of engineering support of crop cultivation, IOP Conference Series: Earth and Environ-mental Science, v. 624(1), p. 012107 (2021). [Google Scholar]
  14. V. Karpeko, I. Masienko, L. Eranova, Innovation process of machine harvesting of laid peas and its efficiency, E3S Web of Conferences, v. 126, p. 00021 (2019). [Google Scholar]
  15. I. Masienko, A. Vasilenko, L. Eranova, Theoretical study of the forced oscillation effect on subsoil tillage, E3S Web of Conferences, v. 193, p. 01028 (2020). [Google Scholar]
  16. G. G. Maslov, A.V. Palapin, E. M. Yudina, D. A. Ushakov, G. E. Samurganov, The advanced rational process flowsheets for cropping spiked cereals, IOP Conference Series: Earth and Environmental Science, v. 659(1), p. 012038 (2021). [Google Scholar]
  17. A. Serguntsov, V. Serguntsova, N. Malashikhin, Operational parameters and modes of rotary working body for harrowing crops, E3S Web of Conferences. v. 126, p. 00023 (2019). [Google Scholar]
  18. V. Konovalov, S. Konovalov, V. Igumnova, Constructive-technological diagram of the rotary-string cultivator and the definition of its main parameters, E3S Web of Conferences, v. 126, p. 00039 (2019). [Google Scholar]
  19. V. Konovalov, S. Konovalov, V. Igumnova, Analytical study of the design parameters of the grinding unit of disk harrows, IOP Conference Series: Earth and Environmental Science, v. 403, p. 012086 (2019). [Google Scholar]
  20. A. Serguntsov, V. Serguntsova, Theoretical research of needle-shaped harrow operation expended on soil pinching by needles, E3S Web of Conferences, v. 126, p. 00024 (2019). [Google Scholar]
  21. F.M. Kanarev, Rotary soil-processing machines and tools (Machine engineering, 1983). [Google Scholar]
  22. M. Ya. Vygodsky, Handbook of Higher Mathematics (AST: Astrel, 2006). [Google Scholar]
  23. E. I. Trubilin, V. I. Konovalov, S. I. Konovalov, Theoretical study of ways to increase the efficiency of operation of disk tillage units, Proceedings of Kuban State Agrarian University, v. 65, pp. 165–171 (2017). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.