Issue |
MATEC Web Conf.
Volume 346, 2021
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2021)
|
|
---|---|---|
Article Number | 03014 | |
Number of page(s) | 7 | |
Section | Mechanical Engineering | |
DOI | https://doi.org/10.1051/matecconf/202134603014 | |
Published online | 26 October 2021 |
Design Improvement of Cutting Part in Tunneling Shield
Siberian State Automobile and Highway University (SibADI), 644080, Omsk, Mira Ave, 5, Russia
* Corresponding author : iateterina@mail.ru
The article presents a variant for improving the design of a working body of a tunneling shield, its cutting part to be more precise. The working body of the tunneling shield has been improved with the changes in the design of a rotor working surface. The theoretical studies aimed at determining the strength characteristics of the proposed rotor design have been carried out. The proposed rotor model has been visualized with the use of the T-Flex CAD software. On the basis of the results obtained in the course of the theoretical research, a comparative analysis of the strength characteristics of the main and improved model of the cutting working body of the tunneling shield have been made. The studies carried out at T-Flex CAD confirmed the working capacity of the improved design of the tunneling shield working body. The strength of the rotor has been determined as a result of the studies carried out. The maximum values of the displacement module is 2.875E-05 m, the equivalent stresses are 29.47 MPa, a reserve coefficient on equivalent stresses is 9.446E 06.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.