EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 346 (2021) MATEC Web Conf., 346 (2021) 03098 References
Open Access
Issue
MATEC Web Conf.
Volume 346, 2021
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2021)
Article Number 03098
Number of page(s) 13
Section Mechanical Engineering
DOI https://doi.org/10.1051/matecconf/202134603098
Published online 26 October 2021
  1. Martinova, L. I., Pushkov, R. L. and Fokin, N. N. (2020). Development of standardized tools for shopfloor programming of turning and turn-milling machines. In IOP Conference Series: Materials Science and Engineering (Vol. 709, No. 4, p. 044064). IOP Publishing. doi:10.1088/1757-899X/709/4/044064 [CrossRef] [Google Scholar]
  2. S.N Sheth, Prof. A.N. Rathour. (2014). Development of Canned Cycle for CNC Milling Machine. In: 2014 International Journal of Engineering Research and General Science Volume 2, Issue 4, June-July, 2014 ISSN 2091-2730, pp. 71–79. [Google Scholar]
  3. Evstafieva S. V., Pushkov R. L., Salamatin E. V. Collecting and visualizing operational data from technological equipment // Automation in Industry, No. 5. 2019. pp. 26–28. [Google Scholar]
  4. Abbas, A. “Enhancement of the Capabilities of CNC Machines via the Addition of a New Counter boring Cycle with a Milling Cutter.” Mechanical Engineering Research 5 (2015): 45. [CrossRef] [Google Scholar]
  5. Abbas, Adel. (2012). Enhanced CNC Machines Capabilities by Adding Circular Patterns Cycle. International Journal of Precision Engineering and Manufacturing. 13. 10.1007/s12541-012-0230-0. [Google Scholar]
  6. Martinova, L., Obukhov, A. and Sokolov S. Practical Aspects of Ensuring Accuracy of Machining on CNC Machine Tools within Framework of “Smart Manufacturing”. 2020 International Russian Automation Conference (RusAutoCon). IEEE, 2020. Page(s): 898 - 902. doi: 10.1109/RusAutoCon49822.2020.9208079 [CrossRef] [Google Scholar]
  7. Omirou, Sotiris & Rossides, S. & Lontos, Antonios. (2012). A new CNC turning canned cycle for revolved parts with free-form profile. International Journal of Advanced Manufacturing Technology - Int J Adv Manuf Technol. 60. 10.1007/s00170-011-3586-x. [Google Scholar]
  8. Martinov, G., Martinova, L. and Ljubimov, A. (2020). From classic CNC systems to cloud-based technology and back // Robotics and Computer-Integrated Manufacturing, 2020, Vol. 63, June. doi: https://doi.org/10.1016/j.rcim.2019.101927 [CrossRef] [Google Scholar]
  9. Kumar K., Ranjan C., Davim J. (2020) Canned Cycle. In: CNC Programming for Machining. Materials Forming, Machining and Tribology. Springer, Cham. https://doi.org/10.1007/978-3-030-41279-1_9 [CrossRef] [Google Scholar]
  10. IslamM.N., RafaiN.H., Phaopahon C. (2010) Effect of Canned Cycles on Drilled Hole Quality. In: Ao SI., Gelman L. (eds) Electronic Engineering and Computing Technology. Lecture Notes in Electrical Engineering, vol 60. Springer, Dordrecht. https://doi.org/10.1007/978-90-481-8776-8_53 [Google Scholar]
  11. Martinov, G. and Kovalenko, A. (2020). Additive Process Equipment Control System for Integration into a Flexible Manufacturing System. In: 2019 XXI International Conference Complex Systems: Control and Modeling Problems (CSCMP). Samara: IEEE. doi:10.1109/CSCMP45713.2019.8976558 [Google Scholar]
  12. Sokolov, S., Pushkov, R. and Evstafieva, S. (2019). General-purpose Control System Adaptation for Gear Milling Tasks. In: 2019 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon). Vladivostok: IEEE, pp.1-5. doi: 10.1109/FarEastCon.2019.8934441 [Google Scholar]
  13. Martinov, G., Kozak, N. and Nezhmetdinov, R. (2018). Approach in Implementing of Logical Task for Numerical Control on Basis of Concept “Industry 4.0”. 2018 International Conference on Industrial Engineering, Applications and Manufacturing (ICIEAM). https://doi.org/10.1109/ICIEAM.2018.8728584 [Google Scholar]
  14. Liliya I. Martinova, Nikolay N. Fokin (2018). An approach to creation of a unified system of programming CNC machines in the dialog mode. In: MATEC Web Conf. Volume 224, 2018. International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018). Sevastopol, Russia, September 10-14, 2018. pp.1-5 https://doi.org/10.1051/matecconf/201822401101 [Google Scholar]
  15. Roman Pushkov, Evgeniy Salamatin, Svetlana Evstafieva (2018). Method of developing parametric machine cycles for modern CNC systems using high-level language. In: MATEC Web Conf. Volume 224, 2018. International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018). Sevastopol, Russia, September 10-14, 2018. pp.1-7 https://doi.org/10.1051/matecconf/201822401116 [Google Scholar]
  16. Georgi M. Martinov, Anna V. Stas, Oleg A. Kudinov (2018). The approach of creating a particular postprocessor and using CNC measuring cycles. In: MATEC Web Conf. Volume 224, 2018. International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2018). Sevastopol, Russia, September 10-14, 2018. pp.1-7 doi.org/10.1051/matecconf/201822404023 [Google Scholar]
  17. Martinova L. I., Fokin N. N. Approach to creating a unified programming system for CNC lathes in the interactive mode // Automation in Industry, No. 5. 2019. pp. 14–17 [Google Scholar]
  18. Pushkov R. L., Salamatin E. V., Evstafieva S. V. Practical aspects of the use of high-level language in the CNC system for the implementation of group processing // Automation in Industry, No. 5. 2018. pp. 31–34 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.