Issue |
MATEC Web Conf.
Volume 346, 2021
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2021)
|
|
---|---|---|
Article Number | 01013 | |
Number of page(s) | 7 | |
Section | Materials Processing Technologies | |
DOI | https://doi.org/10.1051/matecconf/202134601013 | |
Published online | 26 October 2021 |
Fatigue Resistance of 01420 S Alloy Welded Joints Made by Various Welding Methods
Moscow Polytechnic University, Moscow, Russia
* Corresponding author: andree-va@mail.ru
Fatigue characteristics of welded joints of alloy 01420C made by resistance spot welding and automatic argon arc welding are obtained. The highest durability was shown by welded joints with a longitudinal weld. Joints Produced by resistance welding and simulating the edge line of a reinforced element have a durability comparable to an unloaded weld spot, which in turn is inferior to the durability of a joint with a longitudinal weld. The durability of elements of limited cross-section with repair welding of a mechanical cut is similar to the durability of a standard sample in the form of a strip with a hole.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.