Open Access
MATEC Web Conf.
Volume 346, 2021
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2021)
Article Number 02027
Number of page(s) 8
Section Materials Science
Published online 26 October 2021
  1. I. Khasui, O. Morigaki, Hard Facing and Sputtering (Mashinostroenie, Moscow, 1985) (in Russian) [Google Scholar]
  2. I. Khasui, Spraying technique (Mashinostroenie, Moscow, 1975) (in Russian) [Google Scholar]
  3. V.V. Kudinov, Plasma coatings (Nauka, Moscow, 1977) (in Russian) [Google Scholar]
  4. Ju.S. Borisov, Ju.A. Charlamov, S.L. Sidorenko at al. Thermal coatings of powder materials ( Naukova Dumka, Kiev, 1987) (in Russian) [Google Scholar]
  5. Yu.S. Borisov, A.L. Borisova, Plasma powder coatings (Tehnika, Kiev, 1986) (in Russian) [Google Scholar]
  6. V.I. Kuzmin, S.P. Vashenko, I.P. Guljaev at al., Plasma sputtering of wear-resistant coatings made of self-fluxing alloy powders, Vestnik Jugorskogo gosudarstvennogo universiteta, v. 2(37), pp 45–52 (2015) (in Russian) [Google Scholar]
  7. R.C. Tucker, Jr., Introduction to Coating Design and Processing, ASM Handbook, v.5, pp. 497–509 (1994) [Google Scholar]
  8. V.A. Frolov, V.A. Poclad, B.V. Rjabenko at al. Technological features of supersonic gas thermal spraying methods (review), Svarochnoe proisvodstvo, No.11, pp. 38–47 (2006) (in Russian) [Google Scholar]
  9. L.I. Tushinskii, A.V. Plochov. Tушинcкий, Л.И. Investigation of the structure and physical and mechanical properties of coatings (Nauka, Novosibirsk, 1986) (in Russian). [Google Scholar]
  10. T.A. Zimoglyadova, H. Saage, V.A. Pasichnik, A.S. Egorova and .O. Matts, Metal Science and Heat Treatment, v. 60(9-10), pp 633–40 (2019) DOI: 10.1007/s11041-019-00330-4. [CrossRef] [Google Scholar]
  11. I. Hemmati, V. Ocelı´k, Microstructure and Phase Formation in a Rapidly Solidified Laser Deposited Ni-Cr-B-Si-C Hardfacing Alloy, Metallurgical and materials transactions, No2, pp.878–892 (2014) [Google Scholar]
  12. A.E. Terentyev, Investigation of the influence of the composition, production technology and method of applying a composite powder based on an alloy of the system (Ni-Cr-Si-B) on the wear resistance of gas-thermal coatings under friction conditions without lubrication, Problems of tribology, No. 1, pp. 77–83 (2014) (in Russian) [Google Scholar]
  13. A.S. Krivorogova, N.I. Ilinykh, S.A. Ilinykh and B. R. Gel’chinskii, Theoretical and Experimental Study of Nickel-Based Self-Fluxing Materials, Russian Metallurgy (Metally), v.2020, No.8, pp. 853–858 DOI: 10.1134/S0036029520080091 [Google Scholar]
  14. Nina Ilinykh, Anastasia Krivorigova, Boris Gelchinski, Sergey Ilinykh, Leonid Kovalev, Thermodynamic modeling of composition and propereties of self-fluxing materials based on the nickel, MATEC Web of Conferences, v. 329, p. 02026 (2020) DOI: 10.1051/matecconf/202032902026 [CrossRef] [EDP Sciences] [Google Scholar]
  15. G.B. Sinjarev N.A. Vatolin, B.G. Trusov, G.K. Moiseev. The use of IBM for the thermodynamic calculations of metallurgical processes (Nauka, Moscow, 1983) (In Russian) [Google Scholar]
  16. N.A. Vatolin, G.K. Moiseev, B.G. Trusov. Thermodynamic modeling in the high-temperature inorganic systems ( Metallurgia, Moscow, 1994) (In Russian) [Google Scholar]
  17. B.G. Trusov, Programmatic system for modeling phase and chemical equilibria at high temperatures, Vestnik MGTU im. N.E. Baumana. Ser. Priborostroenie, pp. 240–249 (2012) (In Russian) [Google Scholar]
  18. G.V. Belov, B.G. Trusov, Thermodynamic modeling of chemically reacting systems (Moscow, Bauman Moscow State Technical University, 2013) (in Russian) [Google Scholar]
  19. N.I. Ilinykh, T.V. Kulikova, G.K. Moiseev. Composition and equilibrium characteristics of metallic melts of binary systems based on iron, nickel and aluminum (UrO RAN, Ekaterinburg, 2006) (In Russian) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.