EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 346 (2021) MATEC Web Conf., 346 (2021) 01011 References
Open Access
Issue
MATEC Web Conf.
Volume 346, 2021
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2021)
Article Number 01011
Number of page(s) 10
Section Materials Processing Technologies
DOI https://doi.org/10.1051/matecconf/202134601011
Published online 26 October 2021
  1. GOST 2590-2006, Prokat kruglyj [Round rental] [Google Scholar]
  2. GOST 8732-78, Prokat trubnyj_gorjachekatannyj [Tubular Hot-rolled] [Google Scholar]
  3. S. I. Veselovskij, Razrezka materialov [Cutting materials] (Mashinostroenie, Moscow, 1973) [Google Scholar]
  4. S.N. Poljanskij, A. M. Antimonov, V. I. Sokolovskij, Rezka holodnodeformirovannyh trub [Cutting cold formed pipes] (Chermetinformacija Institute, Moscow,1985) [Google Scholar]
  5. B.V. Bondarenko, Rezka sortovogo prokata na mernye zagotovki [Cutting long products into dimensional workpieces] ( NIIMASh, Moscow,1968) [Google Scholar]
  6. I. G. Kubrin, N. I. Medvedjuk, Rezanie metallov na stankah i pilah [Cutting metals on machines and saws] (Vysshaja shkola, Moscow,1966) [Google Scholar]
  7. Ural.fil. VNII abrazivov i shlifovanija [Ural Branch of All-Russian Research Institute of Abrasives and Grinding], Abrazivnaja rezka stal’nyh zagotovok: Metod. rekomendacii [Abrasive Cutting of Steel Billets: Methodical Recommendations] (VNIITJeRM, Moscow,1988) [Google Scholar]
  8. V. M. Finkel’, Ju. I. Golovin, G. B. Rodjukov, Holodnaja lomka prokata [Cold breaking of rolled products] (Metallurgija, Moscow, 1982) [Google Scholar]
  9. E. V. Filimonov, Povyshenie jeffektivnosti razdelenija sortovogo prokata na mernye zagotovki detalej tipa valikov na osnove primenenija holodnoj lomki izgibom [Increasing the efficiency of dividing long products into dimensional workpieces of parts such as rolls based on the use of cold bending breaking], PhD dissertation, Saratov, 2003 [Google Scholar]
  10. B.C. Golubev, F.V. Lebedev, Lazernaja tehnika i tehnologii, Kn.2: Inzhenernye osnovy sozdanija tehnologicheskih lazerov [Engineering fundamentals for creating technological lasers, Vol. 2: Engineering foundations for the creation of technological lasers] (Vysshaja shkola, Moscow, 1988) [Google Scholar]
  11. B.C. Golubev, F.V. Lebedev, Lazernaja tehnika i tehnologii, Kn.1: Inzhenernye osnovy sozdanija tehnologicheskih lazerov [Engineering fundamentals for creating technological lasers, Vol. 1: Engineering foundations for the creation of technological lasers] (Vysshaja shkola, Moscow, 1987). [Google Scholar]
  12. I.G. Shirshov, V.N. Kotikov, Plazmennaja rezka [Plasma cutting] (Mashinostroenie, Leningrad, 1987) [Google Scholar]
  13. S.N. Poljanskij, A.S. Nesterov, Tehnologija i oborudovanie gidroabrazivnoj rezki [Waterjet cutting technology and equipment], Vestnik Mashinostroenija, 5, pp. 43-46 (2004) [Google Scholar]
  14. V.F. Terent’ev, S.A. Korableva, Ustalost’ metallov [Fatigue of metals] (Nauka, Moscow, 2015) [Google Scholar]
  15. V.V. Moskvitin, Plastichnost’ pri peremennyh nagruzhenijah [Plasticity under variable loads] (Moscow University Publishing House, Moscow, 1965) [Google Scholar]
  16. S. Mjenson, Temperaturnye naprjazhenija i malociklovaja ustalost’ [Thermal stresses and low cycle fatigue] (Mashinostroenie, Moscow, 1974) [Google Scholar]
  17. V.I. Sokolovskij, S.N. Poljanskij, A.M. Antimonov, Prodolzhitel’nost’ rezki trub pri znakoperemennom nagruzhenii [Duration of pipe cutting under alternating loading], Izvestija vysshih uchebnyh zavedenij. Chernaja metallurgija, 10 , p.34 (1988) [Google Scholar]
  18. G. S. Pisarenko, A. P. Jakovlev, V. V.Matveev, Spravochnik po soprotivleniju materialov, 2-e izd., pererab. i dop. [Handbook on the strength of materials, 2-nd edition] (Naukova dumka, Kiev, 1988) [Google Scholar]
  19. S.N. Poljanskij, A.M., Antimonov, V.I. Sokolovskij, G.V. Dubonosov, G.V. Araptanov, G.P. Moiseev, I.M. Raushenbah, A.V.Uhov, USSR Patent 1087272 (1984). [Google Scholar]
  20. A.M. Antimonov, S.N. Poljanskij, V.I. Sokolovskij, G.P. Moiseev, I.M. Raushenbah, A.V. Uhov, USSR Patent 1140901 (1985) [Google Scholar]
  21. A.M. Antimonov, A.A. Bersenev, Proizvodstvo toplivoprovodnyh trub dlja dizel’nyh dvigatelej [Production of fuel pipes for diesel engines], Stal’, 3, pp. 54–55 (2009) [Google Scholar]
  22. A.M. Antimonov, Mastering the production of fuel pipes for diesel engines / A.M. Antimonov, N.B. Pushkareva // High technologies. Business. Society 2018 (HTBS 2018): International scientific conference High Technologies Proceedings. (Borovets, Bulgaria, 12-15.03.2018). – Sofia, 2018. – Year II, issue 1 (3). – P. 67-70. [Google Scholar]
  23. A.M. Antimonov, N.B. Pushkareva, Fuel Pipes Coil Drawing Line Production for Diesel Engines, Materials Science Forum, Vol. 946 (3), pp. 739-743 (2019) [Google Scholar]
  24. S.N. Poljanskij, A.M., Antimonov, V.I. Sokolovskij, Mehanizmy rezki kruglogo prokata [Round bars cutting mechanisms], Mashinostroitel’, 1, pp. 10-11 (1986) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.