Open Access
Issue |
MATEC Web Conf.
Volume 346, 2021
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2021)
|
|
---|---|---|
Article Number | 03074 | |
Number of page(s) | 6 | |
Section | Mechanical Engineering | |
DOI | https://doi.org/10.1051/matecconf/202134603074 | |
Published online | 26 October 2021 |
- Dave V. R. Electron beam solid freeform fabrication of metal parts / V. R. Dave, J. E. Matz, T.W. Eagar // Proceedings of the Solid Freeform Fabrication Symposium, Austin, USA. – 1995. – P. 64–70. – access mode: http://sffsymposium.engr.utexas.edu/Manuscripts/1995/1995-09-Dave.pdf [Google Scholar]
- Friel R. J. Ultrasonic additive manufacturing – a hybrid production process for novel functional products / R. J. Friel, R. A. Harris // Proceedings of the Seventeenth CIRP Conference on Electro Physical and Chemical Machining (ISEM). – 2013. – Vol. 6. – P. 35–40. – access mode: http://www.sciencedirect.com/science/article/pii/S2212827113000784 [Google Scholar]
- Dickens P. M. Rapid prototyping using 3-D welding / P. M. Dickens, M. S. Pridham, R. C. Cobb, I. Gibson, G. Dixon // Proceedings of the Solid Freeform Fabrication Symposium, Austin, USA. – 1992. – P. 280–290. – access mode: http:// sffsymposium.engr.utexas.edu/Manuscripts/1992/1992-32- Dickens.pdf [Google Scholar]
- Burns M 1993 Automated Fabrication: Improving Productivity in Manufacturing (Englewood Cliffs. N.J. USA: PTR Prentice Hall) 369 pp. [Google Scholar]
- Saprykin A A 2006 Increasing the productivity of the process of selective laser sintering in the manufacture of prototypes Thesis of candidate of technical Sciences (Yurga: Tomsk Polytechnic University) p 153. [Google Scholar]
- Pronikov A, Averyanov O I and Apollo Yu S 1994 Designing of metal-cutting machines and machine tools (Handbook-textbook vol 3) (Moscow: MSTU them NE Bauman: Mechanical Engineering) p 444. [Google Scholar]
- Kuts V V, Razumov M S, Grechukhin A N and Bychkova N A 2016 Improving the quality of additive methods for forming the surfaces of odd-shaped parts with the application of parallel kinematics mechanisms. International Journal of Applied Engineering Research 11 pp 11832-11835. [Google Scholar]
- Singhal S K, Pandey A P, Pandey P M and Nagpal A K 2005 Optimum part deposition orientation in stereolithography Computer-Aided Design & Applications 2 pp 319–328. [CrossRef] [Google Scholar]
- Hong S, Byun Kwan H Lee 2004 Optimal part orientation of rapid prototyping using a genetic algorithm. Computers & Industrial Engineering pp 426–431. [Google Scholar]
- Lan P T, Chou S, Chent Y, Gemmill L D 1997 Determining fabrication orientations for rapid prototyping with stereolithography apparatus. Computer-Aided Design 29 pp 53–62. [CrossRef] [Google Scholar]
- Massod S H, Rattanawong W Iovenitti P 2003 A generic algorithm for part orientation system for complex parts in rapid prototyping. J. Mater. Process. Technol 139 pp 110–116. [CrossRef] [Google Scholar]
- Egorov I N 2010 Position-force control of robotic and mechatronic devices Vladimir State University Vladimir p 243. [Google Scholar]
- Grechukhin, A.N., Anikutin, I.S., Byshkin, A.S Management of space orientation of the end effector of generation of geometry system five axis manufacturing machinery for additive generation of geometry.. MATEC Web of Conferences. Volume 226, 7 November 2018, Article number 0100214th International Scientific-Technical Conference “Dynamic of Technical Systems”, DTS 2018; Don State Technical University Rostov-on-Don; Russian Federation; 12 September 2018 to 14 September 2018; Code 141842. [Google Scholar]
- Grechukhin, A.N., Kuts, V.V., Razumov, M.S Ways to reduce the error of additive methods of forming. MATEC Web of Conferences. Volume 226, 7 November 2018, Article number 0100214th International Scientific-Technical Conference “Dynamic of Technical Systems”, DTS 2018; Don State Technical University Rostov-on-Don; Russian Federation; 12 September 2018 to 14 September 2018; Code 141842. [Google Scholar]
- Calculation of the controlled parameters of the 6-coordinate robot in the process of additive forming of products. Grechukhin, A.N., Kuts, V.V., Razumov, M.S. (2019) Journal of Physics: Conference Series, 1210 (1), article № 012053. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.