| Issue |
MATEC Web Conf.
Volume 346, 2021
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2021)
|
|
|---|---|---|
| Article Number | 01026 | |
| Number of page(s) | 9 | |
| Section | Materials Processing Technologies | |
| DOI | https://doi.org/10.1051/matecconf/202134601026 | |
| Published online | 26 October 2021 | |
Determination of the Parameters of the Trajectory of Movement of a Standard Tool in Multi-Coordinate Machining of Spatially Modified Teeth of Spur Wheels with the Copying Technique
1 Donetsk National Technical University, 283001, Artyoma str. 58, Donetsk, Ukraine
2 Usinsk branch of Ukhta State Technical University, 169710, Neftyanikov st. 33, Komi Republic, Usinsk, Russia
3 Vorkuta branch of Ukhta State Technical University, 169900, Lenin st. 44, Komi Republic, Usinsk, Russia
* Corresponding author: irina_petryaeva@mail.ru
The article presents a methodology for determining the parameters of the spatial trajectory of movement of a standard cutting tool processing ring gears with spatially modified teeth working by the copying technique. The implementation of the methodology makes it possible to determine the reference points coordinates of the trajectory of movement of the cutting tool in the process of multiple-axis processing of spatially modified teeth of spur wheels on CNC machines. The results obtained in the development of the methodology for determining the trajectory of the cutting tool movement can be further used in the process of performing the technological preparation for the production of spatially modified ring gears, including large-scale ones, in the conditions of single and small-scale production, as well as with choosing a technological equipment, the appointment of cutting modes, as well as in the process of writing control programs for CNC machines.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.