| Issue |
MATEC Web Conf.
Volume 346, 2021
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2021)
|
|
|---|---|---|
| Article Number | 01018 | |
| Number of page(s) | 6 | |
| Section | Materials Processing Technologies | |
| DOI | https://doi.org/10.1051/matecconf/202134601018 | |
| Published online | 26 October 2021 | |
Influence of Recrystallization Annealing Modes on the Mechanical Properties of Copper Pipes After Large Plastic Deformation
1 UMMC, 1 Uspenskiy Ave., Verkhnaya Pyshma, Sverdlovsk Region, 624091, Russian Federation
2 PJSC “Revda non-ferrous metal processing works”, 1 Kombinatskaya Str., Revda, Sverdlovsk Region, 623280, Russian Federation
3 Ural Federal University, 19 Mira Str., Ekaterinburg, 620002, Russian Federation
4 M.N. Miheev Institute of Metal Physics, Ural Branch of Russian Academy of Sciences, Ekaterinburg, 620002, Russian Federation
* Corresponding author: j.n.loginov@urfu.ru
This paper presents the influence of heat treatment modes on product quality parameters. The experiments were carried out on Cu-DHP pipes at various annealing temperature and time. Grain size and mechanical properties dependence on annealing mode were plotted for phosphorus-containing copper. Laboratory results were taken into account for setting process parameters and were industrially tested.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.