Open Access Foreword 00001 Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713700001 PDF (99.2 KB)
Open Access Aspects regarding the surface roughness on a steel part cutted using AWJ technology 01001 Adrian-Paul Basarman and Mircea Lobonţiu Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713701001 PDF (831 KB)References
Open Access Taxonomy of responsibility allocation in Human-Machine Systems with different levels of automation 01002 Marcin Butlewski Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713701002 PDF (470 KB)References
Open Access Design of the clamping system for the CNC machine tool 01003 Miroslav Císar, Ivan Kuric, Nadežda Čuboňová and Matej Kandera Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713701003 PDF (409 KB)References
Open Access Determination of the Industrial Robot Positioning Performance 01004 Vladimír Tlach, Miroslav Císar, Ivan Kuric and Ivan Zajačko Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713701004 PDF (408.9 KB)References
Open Access Verification of static strain and deformation of industrial robot actuator in ANSYS environment 01005 Marek Kočiško, Lukáš Blaško, Petr Baron and Dušan Paulišin Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713701005 PDF (835.9 KB)References
Open Access System for measurement of interaction forces between wheel and rail for railway vehicles 01006 Ion Manea, Ioan Sebesan, Marius Ene, Mihai Gabriel Matache and Sorin Arsene Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713701006 PDF (555.7 KB)References
Open Access Research Regarding the Influence of Execution, Assembly and Functioning Errors on the Teeth Profile Modification of Spur Gear in Front Plane 01007 Mircea Mera and Cristina Stefana Miron-Borzan Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713701007 PDF (403 KB)References
Open Access Decreasing of the manufacturing time for a thermoforming mold by applying the DFM principles 01008 Ancuţa Păcurar, Răzvan Păcurar, Beáta Erőss, Florin Popister and Calin Ciprian Otel Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713701008 PDF (556 KB)References
Open Access Investigation on standoff distance influence on kerf characteristics in abrasive water jet cutting of composite materials 01009 Ioan Alexandru POPAN, Glad CONTIU and Ian CAMPBELL Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713701009 PDF (787 KB)References
Open Access Forecasting of steel consumption with use of nearest neighbors method 01010 Michał Rogalewicz, Robert Sika, Paweł Popielarski and Grzegorz Wytyk Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713701010 PDF (530 KB)References
Open Access Identification of detailed behaviour of Flexible Manufacturing Cell using Hierarchical Timed Coloured Petri Nets 01011 Sanjib Kumar Saren, Florin Blaga and Tiberiu Vesselenyi Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713701011 PDF (589 KB)References
Open Access State space properties of Flexible Manufacturing Cell based on Hierarchical Timed Colored Petri Nets 01012 Sanjib Kumar Saren, Florin Blaga and Tiberiu Vesselenyi Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713701012 PDF (507 KB)References
Open Access Considerations on studying the characteristics of the elastic axle steering system on railway vehicles 01013 Ioan Sebeşan, Sorin Arsene and Mircea Radu Sebeşan Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713701013 PDF (384 KB)References
Open Access Selection of methods used for analyzing the standard time needed to complete the assembly process by means of a fuzzy analytic hierarchy process 01014 Robert Cieślak and Marcin Suszyński Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713701014 PDF (445.4 KB)References
Open Access Ergonomic solutions to support forced static positions at work 01015 Marcin Suszyński, Marcin Butlewski and Róża Stempowska Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713701015 PDF (384 KB)References
Open Access Initial Study on the State of the Art Solutions for the Simulation of the Thermoregulatory Sweating Conditions 01016 Ioan Turcin, Selver Softic, Udo Traussnigg and Adrian Trif Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713701016 PDF (518 KB)References
Open Access Implementation of Lean Manufacturing in Romanian Organisations 01017 Camelia Ioana Ucenic and Claudiu Ratiu Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713701017 PDF (270 KB)References
Open Access Improving Performance in Supply Chain 01018 Camelia Ioana Ucenic and Claudiu Ratiu Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713701018 PDF (293.5 KB)References
Open Access Analysis of shape correctness of surfaces of diamond burnished components 01019 Gyula Varga and Viktoria Ferencsik Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713701019 PDF (1.033 MB)References
Open Access Simulation as a designed tool for material flow analysis by means of Witness Horizon 01020 Tomáš Vysocký, Ľudmila Nováková-Marcinčinová and Ema Nováková-Marcinčinová Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713701020 PDF (600 KB)References
Open Access Additive manufacturing in maxillofacial reconstruction 02001 Luciana Laura Dincă, Alexandra Banu and Aurelian Vişan Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713702001 PDF (419 KB)References
Open Access Concept Development of a New Lumbar Intervertebral Disk Implant 02002 Cristian-Vasile Doicin, Mihaela-Elena Ulmeanu, Alexa-Sorina Frîncu and Vlad-Cristian Enache Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713702002 PDF (1.646 MB)References
Open Access An experimental study on the dimensional accuracy of holes made by abrasive waterjet machining of Hardox steels 02003 Alexandru Catalin Filip, Laurentiu Aurel Mihail and Mircea Anton Vasiloni Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713702003 PDF (584 KB)References
Open Access Investigations of Surface Topography of Hot Working Tool Steel Manufactured with the Use of 3D Print 02004 Pawel Grobelny, Lukasz Furmanski and Stanislaw Legutko Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713702004 PDF (594 KB)References
Open Access Basic design rules of unit cells for additive manufactured lattice structures 02005 Julia Kessler, Nicolae Balc, Andreas Gebhardt and Karim Abbas Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713702005 PDF (743 KB)References
Open Access Influence of the layer thickness in the Fused Deposition Modeling process on the dimensional and shape accuracy of the upper teeth model 02006 Ján Milde, Ladislav Morovič and Jakub Blaha Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713702006 PDF (853 KB)References
Open Access Implementation of additive technologies in elementary education 02007 Melita Milić, Sven Maričić and Donald Radolović Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713702007 PDF (463 KB)References
Open Access Research Regarding the Manufacturing through AM Technologies of an Implant for Cervical Disc Replacement 02008 Cristina Stefana Miron-Borzan, Emilia Sabau, Mircea Mera and Petru Berce Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713702008 PDF (439 KB)References
Open Access Influence of the volume ratio of solid phase on carrying capacity of regular porous structure 02009 Katarina Monkova, Peter Monka and Jozef Tkac Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713702009 PDF (739.8 KB)References
Open Access Finite Element Analysis to determine the optimum contact pressure between the components of a hip implant made by using the Selective Laser Sintering and the Selective Laser Melting Technologies 02010 Răzvan Păcurar, Ancuţa Păcurar and Anna Petrilak Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713702010 PDF (513.4 KB)References
Open Access Optimized anodization setup for the growth of TiO2 nanotubes on flat surfaces of titanium based materials 02011 Gabriela Strnad, Razvan Cazacu, Paul Chetan, Zoltan German-Sallo and Laszlo Jakab-Farkas Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713702011 PDF (416.8 KB)References
Open Access Effect of phosphate/fluoride electrolytes on mass and dimensional stability of anodization bath manufactured by FDM 02012 Gabriela Strnad, Razvan Cazacu, Paul Chetan, Andrei Serban Gaz Florea and Ferencz Peti Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713702012 PDF (515 KB)References
Open Access Education packed in technology to promote innovations: Teaching Additive Manufacturing based on a rolling Lab 02013 Laura Katharina Thurn, Nicolae Bâlc, Andreas Gebhardt and Julia Kessler Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713702013 PDF (511 KB)References
Open Access Comparison of the Accuracy of 3D Printed Prototypes Using the Stereolithography (SLA) Method with the Digital CAD Models 02014 Emil Yankov and Maria P. Nikolova Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713702014 PDF (853 KB)References
Open Access The influence of hole finishing strategies on quality 03001 Vlad Bocanet and Nicolae Panc Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713703001 PDF (387 KB)References
Open Access Studies of the laser etching on painted plastic parts to prevent the risks of engraving failures at mechatronic devices 03002 Ion Cristian Braga, Anisor Nedelcu and Razvan Udroiu Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713703002 PDF (624 KB)References
Open Access Tracking of the development wear of cutting tools with different geometry during parting-off 03003 Robert Čep, Šárka Malotová, Tomáš Zlámal, Vladimír Vrba and Marian Borzan Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713703003 PDF (590 KB)References
Open Access A case study about acquisition of mechanically fixed cutting inserts 03004 Raluca Daicu, Valentin Diţu and Gheorghe Oancea Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713703004 PDF (635 KB)References
Open Access Ergonomic requirements for the operation of machines and technical equipment 03005 Adam Górny Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713703005 PDF (377 KB)References
Open Access SPH Simulation of single grain action in grinding 03006 Dănuţ Julean Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713703006 PDF (503.1 KB)References
Open Access The conceptual framework for physical risk assessment in multi-purpose workplaces 03007 Andrzej Marek Lasota and Krzysztof Hankiewicz Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713703007 PDF (257 KB)References
Open Access Surface roughness evaluation after machining wear resistant hard coats 03008 Katarina Monkova, Peter Monka, Jiri Cesanek, Jan Matejka and Vladimir Duchek Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713703008 PDF (512 KB)References
Open Access Aspects of design of experiments on machining technology by forming the internal threads 03009 Sandor Ravai-Nagy, Nicolae Medan and Ferencz Szigeti Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713703009 PDF (415 KB)References
Open Access Research on influence of gear parameters on noise, vibrations and harshness conditions for automatic transmissions run-off cycle 03010 Nelu Pascalau, Ioan Vuscan and Nicolae Panc Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713703010 PDF (601 KB)References
Open Access Optimization of the Surface Roughness Equation obtained by Al7136 End-Milling 03011 Alina Bianca Pop and Ţîţu Mihail Aurel Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713703011 PDF (455 KB)References
Open Access Multi-objective optimization of single pass turning using performance diagrams 03012 Miroslav Radovanovic Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713703012 PDF (296 KB)References
Open Access Optimal production size with partially inspected batches 03013 Arik Sadeh and Cristina Feniser Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713703013 PDF (228.0 KB)References
Open Access Using the factorial experiment method to analyze the corrosion protection process 03014 Mihail Aurel Ţîţu, Constantin Oprean, Alina Bianca Pop and Ştefan Ţîţu Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713703014 PDF (633 KB)References
Open Access The Emotiv EPOC interface paradigm in Human-Computer Interaction 04001 Dorina Ancău, Nicolae-Marius Roman and Mircea Ancău Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713704001 PDF (493 KB)References
Open Access Inference of power loss in spherical joints of the 6RSS parallel mechanism 04002 Lucian Milica and Gabriel Andrei Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713704002 PDF (486.9 KB)References
Open Access Using the modern CNC controllers capabilities for estimating the machining forces during the milling process 04003 Radu-Eugen Breaz and Sever-Gabriel Racz Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713704003 PDF (718 KB)References
Open Access Using Virtual Reality tools to support simulations of manufacturing instances in Process Simulate: The case of an iCIM 3000 system 04004 Radovan Holubek, Daynier Rolando Delgado Sobrino, Peter Košťál, Roman Ružarovský and Karol Velíšek Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713704004 PDF (579 KB)References
Open Access Novel trends in the assembly process as the results of human – the industrial robot collaboration 04005 Radovan Holubek, Roman Ružarovský, Daynier Rolando Delgado Sobrino, Peter Košťál, Adam Švorc and Karol Velíšek Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713704005 PDF (586 KB)References
Open Access Advanced engineering design capabilities applied for developing a technological device for automated assembly 04006 Ionut Madalin Pista, Vasile Merticaru, Gheorghe Nagit and Marius Ionut Ripanu Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713704006 PDF (639 KB)References
Open Access Allowance treatment static designed couple and repeatable precision in assembly 04007 Štefan Václav, Jozef Jurko PhD. and Šimon Lecký Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713704007 PDF (596.9 KB)References
Open Access Simulation as a support tool in assembly systems planning 04008 Štefan Václav, Šimon Lecký, Katarína Senderská and Albert Mareš Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713704008 PDF (377 KB)References
Open Access Selected properties of laser cladding coatings shaped using Flow drill technology 05001 Dariusz Bartkowski, Waldemar Matysiak and Aneta Bartkowska Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713705001 PDF (516 KB)References
Open Access The lack of uniformity of the deformations and the degree of deforming in case of orbital deformation 05002 Sorin-Dumitru Grozav, Gabriel Nicodim Ciuşcă and Vasile Ceclan Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713705002 PDF (364 KB)References
Open Access Evaluation of deep drawing force under different friction conditions 05003 Lucian Lăzărescu and Dorel Banabic Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713705003 PDF (534 KB)References
Open Access Selected properties of galvanic coatings shaped using thermal drilling technology 05004 Waldemar Matysiak, Dariusz Bartkowski and Aneta Bartkowska Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713705004 PDF (713 KB)References
Open Access Deformation prediction and Finite Element Analyses of precision seamless tubes during cold drawing 05005 Martin Necpal, Maroš Martinkovič and Ivan Buranský Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713705005 PDF (831.4 KB)References
Open Access Surface roughness obtained at stamping of bearing cages 05006 Marius Ionuţ Rîpanu, Gheorghe Nagîţ, Laurenţiu Slătineanu, Oana Dodun and Andrei Marius Mihalache Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713705006 PDF (403.0 KB)References
Open Access Methodology supporting production control in a foundry applying modern DISAMATIC molding line 05007 Robert Sika and Paweł Popielarski Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713705007 PDF (663.4 KB)References
Open Access The analysis of instantaneous tool displacements during precise ball end milling 05008 Szymon Wojciechowski Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713705008 PDF (1.14 MB)References
Open Access Low-cost industrial photogrammetry for rapid prototyping 06001 Vlad Bocanet, Marius Bulgaru and Vlad Pop Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713706001 PDF (641 KB)References
Open Access A new approach of the design process for replacing wooden parts of furniture 06002 Cornel Ciupan, Emanuela Pop, Ioan Filip, Emilia Ciupan, Emilia Câmpean, Ioan Cionca and Vasile Heres Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713706002 PDF (512 KB)References
Open Access Software tool used for automated design of customizable product 06003 Roxana Pescaru, Panagiotis Kyratsis and Gheorghe Oancea Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713706003 PDF (595 KB)References
Open Access Comparison of process documentation generation in PTC Creo and NX systems 06004 Martin Pollák, Petr Baron and Marek Kočiško Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713706004 PDF (507 KB)References
Open Access Experimental studies on manufacturing of the complex shapes made from copper 06005 Alina Ioana POPAN, Bogdan LUCA and Alexandru CAREAN Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713706005 PDF (682 KB)References
Open Access Studies on predictive virtual models based on finite element analysis of the behaviour of geomembranes 06006 Petre Vasiluta, Nicolae Florin Cofaru and Ileana Ioana Cofaru Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713706006 PDF (522.1 KB)References
Open Access An innovation diffusion model for new mobile technologies acceptance 07001 Nadi Barkoczia, Elena Simina Lakatos and Laura Andrada Bacali Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713707001 PDF (372 KB)References
Open Access The study of postural workload in assembly of furniture upholstery 07002 Andrzej Marek Lasota and Krzysztof Hankiewicz Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713707002 PDF (263 KB)References
Open Access Full Factorial DOE to determine and optimize the equation of impact forces produced by water jet used in sewer cleaning 07003 Nicolae Medan, Mihai Banica and Sandor Ravai-Nagy Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713707003 PDF (378 KB)References
Open Access Analytical inventory of process variables for sustainable development of a small business for integrated production of wood pellets 07004 Vasile Merticaru, Bogdan Rusu and Romeo-Mihai Ciobanu Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713707004 PDF (657 KB)References
Open Access Open innovation in IT brands in Cluj-Napoca 07005 Ligia Maria Nan, Roxana Lavinia Păcurariu and Laura Bacali Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713707005 PDF (310 KB)References
Open Access Impact of environmental conditions on the reliability of MEMS components from optical applications 07006 Marius Pustan, Corina Birleanu and Florina Serdean Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713707006 PDF (560 KB)References
Open Access Silver Nanoparticles (AgNP) impregnated filters in drinking water disinfection 07007 Alexandru Rus, Vasile-Dănuţ Leordean and Petru Berce Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713707007 PDF (304 KB)References
Open Access Carbon epoxy front hood for an electrical city vehicle 08001 Paul Bere, Calin Neamtu, Mircea Dudescu, Radu Comes and Sergiu Solcan Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713708001 PDF (502 KB)References
Open Access Humidity influence on the adhesion of SU-8 polymer from MEMS applications 08002 Corina Birleanu, Marius Pustan, Rodica Voicu, Florina Serdean and Violeta Merie Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713708002 PDF (533 KB)References
Open Access Characterization of a thermoforming composite material made from hemp fibers and polypropylene 08003 Emilia Ciupan, Lucian Lăzărescu, Ioan Filip, Cornel Ciupan, Emilia Câmpean, Ioan Cionca and Emanuela Pop Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713708003 PDF (723 KB)References
Open Access Proposal for a composite structure and graphic design for a parking barrier 08004 Liana Hancu, Gabriel Marc, Adrian Popescu, Paul Bere and Simona Rodean Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713708004 PDF (496 KB)References
Open Access Characterization polyethylene terephthalate nanocomposites mixing with nano-silica and titanium oxide 08005 Mircea A. Rusu, Dan Leordean, Cosmin Cosma, Miuta Filip, Marioara Moldovan, Laura Silaghi-Dumitrescu and Olga Hilda Orasan Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713708005 PDF (476 KB)References
Open Access Mechanical behavior of composite materials using the finite element analysis 08006 Emilia Sabau, Adrian Popescu and Cristian Vilau Published online: 22 November 2017 DOI: https://doi.org/10.1051/matecconf/201713708006 PDF (465 KB)References