| Issue |
MATEC Web Conf.
Volume 137, 2017
Modern Technologies in Manufacturing (MTeM 2017 - AMaTUC)
|
|
|---|---|---|
| Article Number | 05005 | |
| Number of page(s) | 8 | |
| Section | Metal Forming | |
| DOI | https://doi.org/10.1051/matecconf/201713705005 | |
| Published online | 22 November 2017 | |
Deformation prediction and Finite Element Analyses of precision seamless tubes during cold drawing
Slovak University of Technology, Faculty of Materials Science and Technology in Trnava, Institute of Production Technologies, J. Bottu 25, 917 24, Trnava, Slovakia
* Corresponding author: martin.necpal@stuba.sk
This paper deals with the deformation of precision seamless tubes during the cold drawing process, using Finite Element Methods. The value of strain obtain by stereology measurement of degree grain boundaries deformation are compared with simulation result for each drawing pass. The material chosen was the E235 and E355 steel grade, which is drawn from the initial dimension of Φ 70 × 6.3 mm to the final dimension of Φ 50 × 3.75 mm by two passes. FEM Software DEFORM 2D with the Lagrangian method is used to numerical analyses of the cold drawing process.
© The authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.