Issue |
MATEC Web Conf.
Volume 137, 2017
Modern Technologies in Manufacturing (MTeM 2017 - AMaTUC)
|
|
---|---|---|
Article Number | 08006 | |
Number of page(s) | 6 | |
Section | Processes of Plastics and Composite Materials | |
DOI | https://doi.org/10.1051/matecconf/201713708006 | |
Published online | 22 November 2017 |
Mechanical behavior of composite materials using the finite element analysis
Technical University of Cluj-Napoca, Manufacturing Engineering Department, 103-105 Muncii Bvd. Cluj-Napoca, Romania
* Corresponding author: emilia.sabau@tcm.utcluj.ro
A finite element analysis software has been used in order to determine several mechanical properties for samples made from unidirectional composite materials. Plates from reinforced unidirectional fiber glass polymer composites obtained by compression hand lay-up process were studied. Tensile tests were performed upon samples with different number and orientation of the composite ply layup.
© The authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.