Issue |
MATEC Web Conf.
Volume 137, 2017
Modern Technologies in Manufacturing (MTeM 2017 - AMaTUC)
|
|
---|---|---|
Article Number | 07003 | |
Number of page(s) | 8 | |
Section | Environmental Engineering | |
DOI | https://doi.org/10.1051/matecconf/201713707003 | |
Published online | 22 November 2017 |
Full Factorial DOE to determine and optimize the equation of impact forces produced by water jet used in sewer cleaning
Technical University of Cluj-Napoca, Department of Engineering and Management of Technology, Victor Babes 62A, Baia Mare, Romania
* Corresponding author: nicolae.medan@cunbm.utcluj.ro
The functioning of the equipment to cleaning sewer is dependent on certain process parameters, causing variations of the impact forces. The aim of this paper is to define and optimise an equation that determines the impact forces, forces produced when the water jets is used to clean the sewer. The research method to measure the impact forces is the experiment using full factorial design of experiment. To can made the experiments was used a stand to generate the pressure waterjets and a device to measurement the values of impact forces. In the first part of paper was determine the equation of impact forces produced by water jet and then was realised a multiple linear regression model in three different ways to optimise the prediction of the proposed equation.
© The authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.