Open Access
| Issue |
MATEC Web Conf.
Volume 137, 2017
Modern Technologies in Manufacturing (MTeM 2017 - AMaTUC)
|
|
|---|---|---|
| Article Number | 01019 | |
| Number of page(s) | 8 | |
| Section | Manufacturing Engineering | |
| DOI | https://doi.org/10.1051/matecconf/201713701019 | |
| Published online | 22 November 2017 | |
- P. Tamás, B. Illés, Acad. J. of Manuf. Eng. 14 4, 119 (2016) [Google Scholar]
- P. Tamás, B. Illés, P. Dobos, IOP Conf. Series: Mat. Sci. and Eng. 161, 1 (2016) [Google Scholar]
- M. Rusko, R. Kralikova, Advanced Mat. Research 816–817, 1225 (2013) [Google Scholar]
- M.H. El-Axir, O.M. Othman, A.M. Abodiena, J. Mat. Proc. Tech. 196 1–3, 120 (2008) [CrossRef] [Google Scholar]
- J. Kundrák, K. Gyáni, V. Bana, Int. J. of Adv. Manuf. Techn. 38 1–2, 110 (2008) [CrossRef] [EDP Sciences] [Google Scholar]
- C. Felhő, J. Kundrák, Key Eng. Materials 496 pp.: 194–199 (2012) [CrossRef] [Google Scholar]
- G. Varga, Key Eng. Mat. 581 pp.: 403–408 (2014) [CrossRef] [Google Scholar]
- M. Novák, Manuf. Technology 12 pp.: 66–70 (2012) [Google Scholar]
- J. Kundrák, Z. Gácsi, K. Gyáni, V. Bana, G. Tomolya, Int. J. of Adv. Manuf. Techn., 62 5–8, 457 (2012) [CrossRef] [Google Scholar]
- W. Zebala, B. Slodki, G. Struzikiewicz, Case Study. Eksploatacja i Niezawodnosc – Maint. and Reliability 15 4, 421 (2013) [Google Scholar]
- J. Kundrák, A.G. Mamalis, A. Markopoulos, Materials and Manuf. Proc. 19 6, 979 (2004) [CrossRef] [Google Scholar]
- G. Dezső, J. Herman, F. Szigeti, Int. J. of Eng. X 1, 155 (2012) [Google Scholar]
- I. Sztankovics, J Kundrák, Manuf. Techn. 14 1 pp.: 97–104 (2014) [Google Scholar]
- J. Beňo, I. Maňková, M. Vrabeľ, D. Kottfer, Measurement 46 1 pp.: 582–592 (2013) [CrossRef] [Google Scholar]
- M.R. Stalin John, P. Suresh, D. Raguraman, B.K. Vinayagam, Arab J. SciEng. 39 pp.: 3209–3216 (2014) [CrossRef] [Google Scholar]
- A. Akkurt, Metal Sci. and Heat Treatm. 53 3-4 pp.: 145–150 (2011) [CrossRef] [Google Scholar]
- M. Polankova, F. Manlig, R. Králiková, MM Science Journal. pp.: 691–695, (2015) [CrossRef] [EDP Sciences] [Google Scholar]
- G. Taguchi, System of experiment design, 1. Experimental design (UNIPUB, Kraus International Publications, White Plains, New York, 1987) [Google Scholar]
- L. Fridrik, Chosen chapters from the topics of experimental design of production engineering (Műszaki Könyvkiadó, Budapest, 1987) (In Hungarian) [Google Scholar]
- Á. Drégelyi-Kiss, R. Horváth, B. Mikó, Dev. in Mach. Technol. 3. Ed.: W. Zebala, I. Manková, Cracow University of Technology pp.: 20–34 (2013) [Google Scholar]
- M.N. Durakbasa, A. Akdogan, S. Vanli, A. Gunay Bulutsuz, Measurement 68 pp.: 92–99 (2015) [CrossRef] [Google Scholar]
- A. Akkurt, J. of Materials Eng. and Perform. 20 6 pp.: 960–968, (2011) [CrossRef] [Google Scholar]
- L. Luca, S. Neagu-Ventzel, I. Marinescu, Prec. Eng. (Elsevier) 29 pp.: 253–256 (2005) [Google Scholar]
- T.A. El-Taweel, M.H. El-Axir, The Int. J. of Adv. Manuf. Techn. 41 pp. 301–310, (2009) [CrossRef] [Google Scholar]
- G. Varga, Key Eng. Mat. 581 pp.: 403–408 (2014) [CrossRef] [Google Scholar]
- http://www.steelnumber.com/en/steel_composition_eu.php?name_id=154 (09.01.2017) [Google Scholar]
- V. Ferencsik, Sci. Students’ Conf., University of Miskolc, pp.: 1–34 (2013) (In Hungarian) [Google Scholar]
- D.J. Whitehouse, Handbook of Surface and Nanometrology, Second edition, (CRC Press, Taylor and Francis Group, 2011) [CrossRef] [Google Scholar]
- N.N., Study aid, Taylor Hobson Precision, p.: 34 (In Hungarian) (2013) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.