MATEC Web Conf.
Volume 137, 2017Modern Technologies in Manufacturing (MTeM 2017 - AMaTUC)
|Number of page(s)||6|
|Section||Processes of Plastics and Composite Materials|
|Published online||22 November 2017|
Proposal for a composite structure and graphic design for a parking barrier
1 Technical University of Cluj-Napoca, Manufacturing Engineering Department, ROMANIA
* Corresponding author: Liana.Hancu@tcm.utcluj.ro
In the paper there is presented a case study of a cabinet barrier for a car parking. The materials used for manufacture are changed with polymeric composites. A design is proposed for the cabinet and a manufacturing technology is considered. The composite material is designed, realized and tested with tensile test ant three bending test and the results are presented.
© The authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Initial download of the metrics may take a while.