Open Access
| Issue |
MATEC Web Conf.
Volume 137, 2017
Modern Technologies in Manufacturing (MTeM 2017 - AMaTUC)
|
|
|---|---|---|
| Article Number | 02002 | |
| Number of page(s) | 12 | |
| Section | Additive Manufacturing and Non-Traditional Technologies | |
| DOI | https://doi.org/10.1051/matecconf/201713702002 | |
| Published online | 22 November 2017 | |
- A. Officer, A. Posarac (Executive editors), World report on disability, World Health Organization, ISBN 978-92-4-068521-5 (2011) [Google Scholar]
- C. Thompson, J. Mutch, S. Parent, J.M. Mac-Thiong, J Spinal Cord Med 38 (2), 214–223 (2015) [CrossRef] [Google Scholar]
- A. Singh, L. Tetreault, S. Kalsi-Ryan, A. Nouri, M.G. Fehlings, Clin Epidemiol 6, 309–331 (2014) [Google Scholar]
- Spinal Implants and Surgical Devices Market – Global Forecast to 2021, Global Report, ID: 3978582 (2016) [Google Scholar]
- S.M. Kurtz, A.A. Edidin, Spine Technology Handbook, ISBN: 978-0-12-369390-7 (2006) [Google Scholar]
- P.J. Slosar, J. Spinal Research Foundation 9 (1), 34–41 (2014) [EDP Sciences] [Google Scholar]
- L. Harvey, Management of Spinal Cord Injuries: A Guide for Physiotherapists, Elsevier Health Sciences, ISBN 0-443-06858-5 (2008) [Google Scholar]
- M.N. Melkerson, J.S. Kirkpatrick, S.L. Griffith, ASTM International, West Conshohocken (2003) [Google Scholar]
- M. Nordin, V.H. Frankel, Basic Biomechanics of the Musculoskeletal System, 4th Edition, LWW Publisher, ISBN-13: 978-1609133351 (2012) [Google Scholar]
- D.H. Kim, F.P. Cammisa, R.G. Fessler, Dynamic reconstruction of the spine, Thieme (2006) [Google Scholar]
- C.J. Korge, F. Heider, H.M. Mayer, Oper Orthop Traumatol 9, 480–494 (2010) [CrossRef] [Google Scholar]
- R. Putz, J. Waschke, Sobotta Atlas of Human Anatomy, Vol. 1: General Anatomy and Musculoskeletal System, Editors Paulsen F. and Waschke J., 15th Ed., Elsevier Urban & Fischer, ISBN 978-0-7234-3733-8 (2011) [Google Scholar]
- R.C. Reis, M.F. de Oliveira, J.M. Rotta, R.V. Botelho, Open Orthop J 9, 20–25 (2015) [CrossRef] [Google Scholar]
- E.C. Benzel, Spine Surgery: Techniques, Complication Avoidance & Management, 3rd Edition, 1, Elsevier, Saunders, ISBN: 978-1-4377-0587-4 (2012) [Google Scholar]
- T. Özel, P.J. Bártolo, E. Ceretti, J. De Ciurana Gay, C.A. Rodriguez, J.V.L. Da Silva, Biomedical Devices: Design, Prototyping, and Manufacturing, Wiley Publishing, ISBN: 978-1-118-47892-9 (2016) [Google Scholar]
- M. Marcolongo, S. Sarkar, N. Ganesh, 6, 127–145 (2011) [Google Scholar]
- T. Wholers, T. Caffrey, Wholers Report 2014 – 3D Printing and Additive Manufacturing State of the Industry, Wholers Associates (2014) [Google Scholar]
- G.H. Snyder, M. Cotteleer, B. Kotek, 3D opportunity in medical technology: Additive manufacturing comes to life, A Deloitte series on additive manufacturing, Deloite University Press, US (2014) [Google Scholar]
- N. de Beer, A. van der Merwe, Rapid Prototyping J 19 (2), 126–139 (2013) [CrossRef] [Google Scholar]
- V.N. Chougule, A.V. Mulay, B.B. Ahuja, Procedia Eng 97, 212–219 (2014) [Google Scholar]
- A.S. Frîncu, Development of a production system project and process for a spinal implant, Graduate Project, M.E. Ulmeanu, C.V. Doicin (Coord.), Bucharest (2017) [Google Scholar]
- C.V. Toen, M.M. Sran, S.N. Robinovitch, P.A. Cripton, Spine (Phila Pa 1976) 37 (9), E519–E527 (2012) [Google Scholar]
- ISO 18192–1:2011, Test Implants for surgery — Wear of total intervertebral spinal disc prostheses — Part 1: Loading and displacement parameters for wear testing and corresponding environmental conditions for test, International Organisation for Standardization, Geneva, Switzerland (www.iso.org) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.