| Issue |
MATEC Web Conf.
Volume 137, 2017
Modern Technologies in Manufacturing (MTeM 2017 - AMaTUC)
|
|
|---|---|---|
| Article Number | 04006 | |
| Number of page(s) | 6 | |
| Section | Automation of Manufacturing Systems and Assembly | |
| DOI | https://doi.org/10.1051/matecconf/201713704006 | |
| Published online | 22 November 2017 | |
Advanced engineering design capabilities applied for developing a technological device for automated assembly
1 ”Gheorghe Asachi” Technical University of Iasi, Department of Machine Manufacturing Technology, Prof. D. Mangeron Street, no. 39A, Iasi, Romania
* Corresponding author: ionutpista@yahoo.com
The theoretical approach and the related case study presented in the paper are part of a larger research regarding the optimization of assembled products and assembly processes by enhancing the effectiveness and efficiency of design activities, including by embedment of DfX/DFMA principles. First of all, a conceptual model for the theoretical approach is proposed and discussed. The case study refers to the engineering design of an indexing mounting table for automated assembly of an electrical plug inlet. Some advanced principles and theories are discussed in relation to the technical solution design. Advanced engineering design capabilities provided by Solid Edge have been used for solving the 3D modelling task and for the other detailed design activities. Finally, some related conclusions are included, together with some directions of further researches.
© The authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.