Open Access
Issue
MATEC Web Conf.
Volume 137, 2017
Modern Technologies in Manufacturing (MTeM 2017 - AMaTUC)
Article Number 02009
Number of page(s) 8
Section Additive Manufacturing and Non-Traditional Technologies
DOI https://doi.org/10.1051/matecconf/201713702009
Published online 22 November 2017
  1. D. Paramita et al.:, Procedia Manufacturing, 1, 343 – 354 (2015) [CrossRef] [Google Scholar]
  2. J. Dobransky, et al.:, Key Engineering Materials, 669, 532 – 540 (2016) [CrossRef] [Google Scholar]
  3. M, Cloot et al.: Assessing new support minimizing strategies for the additive manufacturing technology SLM. Solid Freeform Fabrication Symposium (2013) [Google Scholar]
  4. S. M. Hur et al.: Determination of fabricating orientation and packing in SLS process. Journal of Material Processing Technology 236 – 243 (2001) [CrossRef] [Google Scholar]
  5. Beno, P., Kozak, D., Konjatic, P.:, Tehnicki Vjesnik, 5(21), 1051 – 1055 (2014) [Google Scholar]
  6. F. Ferroudji et al., Inter. J.of Mechanical & Mechatronics Engineering IJMME/ IJENS, 04, 92 – 97 (2014) [Google Scholar]
  7. S. H. Masood, W. Rattanawong, Int. J. of Advance Manuf. Technol., 19, 209 – 216 (2002) [CrossRef] [Google Scholar]
  8. V. Majstorovic et al., Procedia CIRP, 25, 27 – 32 (2014) [CrossRef] [Google Scholar]
  9. D. T. Pham et al., Int. J.of Advance Manufacturing Technology, 15, 674 – 682 (1999) [CrossRef] [Google Scholar]
  10. P. Baron, et al., J. of the Inter. Measurement Confederation, 94, pp. 245 – 253 (2016) [CrossRef] [Google Scholar]
  11. S. Allen, D. Dutta, Solid Freeform Fabrication Symposium, Austin, 259–269 (1994) [Google Scholar]
  12. A. Panda, et al.: Monitoring and Evaluation of Production Processes: An Analysis of the Automotive Industry, Springer International Publishing (2016) [CrossRef] [Google Scholar]
  13. K. Monkova, et al., Advances in Mechanical Engineering, 1–11 (2014) [Google Scholar]
  14. P. Hanzl, M. Zetek, I. Zetkova:, Proceedings of the 26th DAAAM, 748 – 752 (2015) [EDP Sciences] [Google Scholar]
  15. P. Hanzl, I. Zetkova, J. Mach, Manufacturing Technology, 1, 34 – 38 (2017) [Google Scholar]
  16. M. Ungureanu et al., Procedia Engineering, 149, 495 – 500 (2016) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.