MATEC Web Conf.
Volume 137, 2017Modern Technologies in Manufacturing (MTeM 2017 - AMaTUC)
|Number of page(s)||6|
|Published online||22 November 2017|
Decreasing of the manufacturing time for a thermoforming mold by applying the DFM principles
1 Technical University of Cluj-Napoca, Department of Manufacturing Engineering, Romania
2 Technical University of Cluj-Napoca, Department of Design and Robotics Engineering, Romania
3 Technical University of Cluj-Napoca, Department of Industrial Engineering and Management
* Corresponding author: firstname.lastname@example.org
In this paper it is analyzed a product machined at the S.C. ULMA PACKAGING S.A. company, which is a “Thermoforming mold” used in order to obtain plastic containers in which the food or non-food product is packed, making part of a thermoforming machine called TFS 200. The aims of this paper are to determine the optimal technological parameters and to study the effects of the DFM principles and the optimal tool path strategy usage on manufacturing time of the “Thermoforming mold”. A redesign of the thermoforming mold is presented based on the failed rules and recommendations given by the DFM program and followed by the analysis of the DFM’s benefic effect on the manufacturing time.
© The authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.