| Issue |
MATEC Web Conf.
Volume 137, 2017
Modern Technologies in Manufacturing (MTeM 2017 - AMaTUC)
|
|
|---|---|---|
| Article Number | 06004 | |
| Number of page(s) | 8 | |
| Section | CAD/CAM | |
| DOI | https://doi.org/10.1051/matecconf/201713706004 | |
| Published online | 22 November 2017 | |
Comparison of process documentation generation in PTC Creo and NX systems
Technical University of Košice, Faculty of Manufacturing Technologies, 080 01 Prešov, Slovakia
* Corresponding author: martin.pollak@tuke.sk
Process documentation is a specific type of progressive form for representation of the technological documentation which defines the sequence of the individual production steps on the chosen machine according to a pre-executed NC program. It is represented by a simplified form of automatically generated reports in a short time interval. The significant contribution of the creation is in the acceleration of communication between the designer and the technologist, as well as NC machine operators with the possibility of archiving and managing internal data. The article briefly describes and compares the creation of process documentation in the PTC Creo system and in the NX system environment.
© The authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.