Issue |
MATEC Web Conf.
Volume 137, 2017
Modern Technologies in Manufacturing (MTeM 2017 - AMaTUC)
|
|
---|---|---|
Article Number | 06001 | |
Number of page(s) | 8 | |
Section | CAD/CAM | |
DOI | https://doi.org/10.1051/matecconf/201713706001 | |
Published online | 22 November 2017 |
Low-cost industrial photogrammetry for rapid prototyping
Technical University of Cluj-Napoca, Faculty of Machine Building, Bvd. Muncii no. 103-105, Cluj-Napoca, 400641, Romania
* Corresponding author: vlad.bocanet@tcm.utcluj.ro
The field of extracting 3D information from photographs also known as photogrammetry has a wide range of applications, even in industry. It can be used to rapidly prototype a part with a decent precision. This paper analyses this possibility for a gas regulator that was cut in half. From the pictures taken of the part, a point-cloud can be generated that can be transformed in a mesh and subsequently in a CAD model. Alternatively, it can be compared with an existing CAD model to determine deviations.
© The authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.