Free Access to the whole issue

Open Access

Statement of Peer review

Published online: 22 February 2019

• PDF (47.2 KB)

Open Access

About the conference

Published online: 22 February 2019

• PDF (134 KB)

Welding Technologies

Open Access

Mechanical and Microstructural Properties of Friction Stir Welded Dissimilar Aluminum Alloys and Pure Copper Joints 01001

W. Winarto, M. Anis and B. Eka Febryansyah

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926901001

• Abstract
• PDF (1.824 MB)
• References

Open Access

Effect of Double Pulse MIG Welding on Porosity Formation on Aluminium 5083 Fillet Joint 01002

Eakkachai Warinsiriruk, Jukkapun Greebmalai and Montri Sangsuriyun

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926901002

• Abstract
• PDF (904.9 KB)
• References

Open Access

Different Ratios of Electron Beam Welding of Dissimilar Titanium Alloys: Ti-10V-2Fe-3Al and Ti-6Al-4V 01003

Muhammad Iman Utama, Janu Ageng Nugroho, Abdul Aziz Ammar, Nokeun Park and Eung Ryul Baek

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926901003

• Abstract
• PDF (779.5 KB)
• References

Open Access

A Feasibility Study Comparing Two Commercial TIG Welding Machines for Deep Penetration 01004

Richard French, Hector Merin-Reyes and Will Yeadon

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926901004

• Abstract
• PDF (345.3 KB)
• References

Open Access

Mechanical Properties and Microstructure of Friction Stir Spot Welded 6082-T6 Aluminium Alloy Joint 01005

Nurul Muhayat, Bobby Priatmana Putra and Triyono

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926901005

• Abstract
• PDF (504.4 KB)
• References

Open Access

Single-Pass Cladding Process Using Hot-wire Gas Metal Arc Welding Technique 01006

Pattanawit Suntiniwat, Eakkachai Warinsiriruk and Sutep Joy-A-Ka

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926901006

• Abstract
• PDF (793.1 KB)
• References

Open Access

Effect of Heat Sinks on Cooling Time to Weld Interpass Temperature 01007

Juhani Laitila, Jari Larkiola and David Porter

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926901007

• Abstract
• PDF (405.6 KB)
• References

Open Access

Some Hints to Develop Particular Line Pipe Specification 01008

Ardian Fandika

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926901008

• Abstract
• PDF (401.2 KB)
• References

Open Access

The Influence of Heat Input to Mechanical Properties and Microstructures of API 5L-X65 Steel Using Submerged Arc Welding Process 01009

Suryana, Agus Pramono, Iskandar Muda and Ade Setiawan

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926901009

• Abstract
• PDF (2.600 MB)
• References

Open Access

Mechanical Properties and Microstructure of the Repeated Weld-Repairs of Austenitic Stainless Steel Plates 01010

W. Winarto, M. Anis and Refnaldi

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926901010

• Abstract
• PDF (1.620 MB)
• References

Open Access

Welding Cylinder Head: The Effect of Filler Variations and Post Weld Heat Treatment (PWHT) on Microstructure and Mechanical Properties on TIG Welded Cast Iron FC 250 01011

Wikan Jatimurti, Mas Irfan P. Hidayat, Rochman Rochiem and Meilati Pasca Muna

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926901011

• Abstract
• PDF (1.375 MB)
• References

Open Access

Techno-economic Feasibility of Modified Pulse Arc Deposition on Thick Section of Quenched and Tempered Steel 01012

Neville Cornish, Rahim. Kurji, Anthony Roccisano and Reza Ghomashchi

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926901012

• Abstract
• PDF (1.081 MB)
• References

Advanced Welding Processes

Open Access

Gas Metal Arc Root Welding of Pearlitic Rails Using Magnetic Arc Deflection 02001

Leonhard Weingrill, Martin Schwald, David Frühstück, Clemens Faustmann and Norbert Enzinger

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926902001

• Abstract
• PDF (1.093 MB)
• References

Open Access

Effect of Tools Geometry and Dwell Time on Mechanical Properties and Macrograph of Two-Stage Refilled Friction Stir Spot Micro Weld 02002

Ario Sunar Baskoro, Mohammad Azwar Amat and Muhammad Andre Widiyanto

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926902002

• Abstract
• PDF (1.891 MB)
• References

Open Access

The Effect of Ultrasonic Energy on Joint Characterization in Ultrasonic Spot Welding Multilayer Tabs Used in Lithium-ion Battery Manufacturing 02003

Z.N. Ma and Y.S. Zhang

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926902003

• Abstract
• PDF (678.2 KB)
• References

Open Access

Effect of Rotational Speed and Flat Tool Diameter on the Zn Distribution of the Dissimilar Metals Friction Stir Spot Welded between Aluminum Alloy 5083 H321 and Galvanized Steel 02004

Bintang Adhi Guna, Nurul Muhayat and Triyono

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926902004

• Abstract
• PDF (648.0 KB)
• References

Open Access

Influence of Thermal Aging on Microstructure and Property of Gold Alloy Joint Soldered by Sn-based Solder 02005

Guoqian Mu, Wenqing Qu, Xixiao Lv and Hongshou Zhuang

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926902005

• Abstract
• PDF (685.7 KB)
• References

Open Access

Innovate Method for Friction Stir Welding of Al-Mg-Si Alloy Thin Plate 02006

Li Fu and Fenjun Liu

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926902006

• Abstract
• PDF (455.2 KB)
• References

Open Access

Effect of Nickel on the Microstructure, Hardness and Impact Toughness of SM570-TMC Weld Metals 02007

Nova Arief Setiyanto, Herry Oktadinata and Winarto Winarto

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926902007

• Abstract
• PDF (899.0 KB)
• References

Open Access

Pattern and Direction of Microstrain in Q&T Steel Weld Joint 02008

Yurianto, Pratikto, Rudy Soenoko, Wahyono Suprapto and Sulardjaka

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926902008

• Abstract
• PDF (547.4 KB)
• References

Open Access

Electron Beam Welding of Large Components for The Nuclear Industry 02009

Bernd Baufeld and Thomas Dutilleul

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926902009

• Abstract
• PDF (356.2 KB)
• References

Open Access

Electron Beam Welding of 2099-T83 Aluminium-lithium Alloy Thick Plates 02010

Jozef Bárta, Beáta Simeková, Milan Marônek and Mária Dománková

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926902010

• Abstract
• PDF (1.114 MB)
• References

Open Access

Laser Multi-Pass Narrow-Gap Welding – A Promising Technology for Joining Thick-Walled Components of Future Power Plants 02011

Benjamin Keßler, Berndt Brenner, Dirk Dittrich, Jens Standfuß, Eckhard Beyer, Christoph Leyens and Gerhard Maier

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926902011

• Abstract
• PDF (1.134 MB)
• References

Open Access

Challenges and Opportunities in Remote Laser Welding of Steel to Aluminium 02012

Hiren R. Kotadia, Pasquale Franciosa and Dariusz Ceglarek

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926902012

• Abstract
• PDF (435.1 KB)
• References

Open Access

Non-contacted Permanent Magnetic Absorbed Wall-climbing Robot for Ultrasonic Weld Inspection of Spherical Tank 02013

Yulin Ding, Zhenguo Sun and Qiang Chen

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926902013

• Abstract
• PDF (928.2 KB)
• References

Corrosion and Failure Analysis

Open Access

Generalized Formulation for Fatigue Assessment of Laser Stake-welded T-joints Varying Thicknesses and Loading Conditions 03001

Pasquale Gallo, Heikki Remes and Jani Romanoff

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926903001

• Abstract
• PDF (474.2 KB)
• References

Open Access

Failure Mode Prediction of Resistance Spot Welded Quenching and Partitioning Steel 03002

Cheng Luo and Yansong Zhang

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926903002

• Abstract
• PDF (1.198 MB)
• References

Open Access

Analisys of Welding Crack on The Under Frame of Wagon for Cement Bags Transportation Using Euro Code, Measurement and Finite Element 03003

Agus Sasmito, Yudi Irawadi and Hary Soebagyo

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926903003

• Abstract
• PDF (1001 KB)
• References

Open Access

HCF Failure Modes and Mechanisms of Dissimilar Welds of Martensite/Austenite Metals at Elevated Temperature 03004

Chendong Shao, Haichao Cui, Fenggui Lu and Zhuguo Li

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926903004

• Abstract
• PDF (731.4 KB)
• References

Open Access

Fatigue Life Prediction of Welded Joint by Microstructure-based Simulation 03005

Takayuki Shiraiwa, Fabien Briffod and Manabu Enoki

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926903005

• Abstract
• PDF (629.1 KB)
• References

Open Access

The Effect of Microstructure on Stress Corrosion CrackingGrowth Rates of LowAlloy High Strength Steel Welded Joint 03006

Tongjiao Chu, Haichao Cui and Fenggui Lu

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926903006

• Abstract
• PDF (660.7 KB)
• References

Open Access

Weld Repair of Steam Turbine Rotor with 12 Cr Weld to Mitigate Corrosion Issues 03007

Vamadevan Gowreesan, Dhimas Ario, Hepy Hanifa and Wayne Greaves

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926903007

• Abstract
• PDF (746.3 KB)
• References

Open Access

Low-cycle Fatigue and Fracture Behaviour of 9%Ni Steel Flux Cored Arc Welding joint at Cryogenic Temperature 03008

Weidong Mu, Yuzhang Li, Yan Cai and Min Wang

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926903008

• Abstract
• PDF (1.331 MB)
• References

Open Access

Analysis of Weld Cold Cracking In Excavator Bucket Adapter 03009

Wahidun Adam, Pratjojo Dewo and Winarto Winarto

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926903009

• Abstract
• PDF (1.261 MB)
• References

Open Access

Residual Stress Assessment of PWMT Butt Joint with 10mm HSLA S460G2+M Steel using HFMI/PIT FEA and XRD 03010

Noridzwan Nordin, Muhd. Faiz Mat, Yupiter H. P. Manurung, Salina Saidin and Dahia Andud

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926903010

• Abstract
• PDF (447.9 KB)
• References

Open Access

Prevent Cracking in Deposition of Carbon Steel on Inconel 625 03011

M. A. Morsy, M. R. El Koussy and M. M. Farag

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926903011

• Abstract
• PDF (948.7 KB)
• References

Open Access

Effect of Long-term Service on Microstructure and Mechanical Properties of NiCrMoV Steel Welded Joint 03012

Manjie Fan, Peng Wang and Qixing Sun

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926903012

• Abstract
• PDF (542.1 KB)
• References

Open Access

Failure Analysis of Tube Radiant Heater Hot Oil in Refinery Industry 03013

Moch Ardi Dimastiar, Ahmad Taufik and Anne Zulfia Syahrial

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926903013

• Abstract
• PDF (1.144 MB)
• References

Open Access

Preliminary Assessment of 22Cr and 15Cr Materials Selection for CO₂ Enhanced Oil Recovery Program 03014

Harris Prabowo, Yudha Pratesa, Reza M. Ulum, Badrul Munir and Johny W. Soedarsono

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926903014

• Abstract
• PDF (189.9 KB)
• References

Welding Design, Automation, and Simulation

Open Access

Research on Adaptive Controller for Variable Polarity Plasma Arc Welding Power Supply with High-Frequency 04001

Yang Zhou, Bojin Qi and Minxin Zheng

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926904001

• Abstract
• PDF (559.6 KB)
• References

Open Access

Selection of Welding Process for Repairing Shredder Hammer by Integrated Data Envelopment Analysis (DEA) and P-robust Technique 04002

Rahmad Wisnu Wardana, Eakkachai Warinsiriruk and Sutep Joy-A-Ka

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926904002

• Abstract
• PDF (625.6 KB)
• References

Open Access

Controlling the Width of Weld Bead from the Weld Pool Using Machine Vision and Artificial Neural Network 04003

Ario Sunar Baskoro, Duvall Anggraita Purwanto and Agus Widyianto

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926904003

• Abstract
• PDF (1.190 MB)
• References

Open Access

Estimation of Contact Tip to Work Distance (CTWD) using Artificial Neural Network (ANN) in GMAW 04004

Fuad Mahfudianto, Eakkachai Warinsiriruk and Sutep Joy-A-Ka

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926904004

• Abstract
• PDF (979.1 KB)
• References

Open Access

Effect of Squeeze-out and Sizing Ratio to The Residual Circumferential Stress of HFW Pipe 04005

Siens Harianto, Elang Susilaputra, Peter Darto and Ardian Fandika

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926904005

• Abstract
• PDF (480.7 KB)
• References

Additive Smart Manufacturing

Open Access

Influence of Interpass Temperature on Wire Arc Additive Manufacturing (WAAM) of Aluminium Alloy Components 05001

Karan Derekar, Jonathan Lawrence, Geoff Melton, Adrian Addison, Xiang Zhang and Lei Xu

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926905001

• Abstract
• PDF (812.9 KB)
• References

Open Access

WAAM Application for EPC Company 05002

Priyantomo Agustinus Ananda

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926905002

• Abstract
• PDF (630.0 KB)
• References

Open Access

Development of Bead Modelling for Distortion Analysis Induced by Wire Arc Additive Manufacturing using FEM and Experiment 05003

Keval P Prajadhiama, Yupiter HP Manurung, Zaidi Minggu, Fetisia HS Pengadau, Marcel Graf, Andre Haelsig, Tom-Eric Adams and Hui Leng Choo

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926905003

• Abstract
• PDF (568.6 KB)
• References

Open Access

Review on Plasma Atomizer Technology for Metal Powder 05004

Ario Sunar Baskoro, Sugeng Supriadi and Dharmanto

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926905004

• Abstract
• PDF (732.5 KB)
• References

Marine and Offshore

Open Access

Fatigue Life Enhancement of Transverse and Longitudinal T-Joint on Offshore Steel Structure HSLAS460G2+M using Semi-automated GMAW and HFMI/PIT 06001

Dahia Andud, Muhd Faiz Mat, Yupiter HP Manurung, Salina Saidin, Noridzwan Nordin, Norasiah Muhammad and Martin Laitner

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926906001

• Abstract
• PDF (514.4 KB)
• References

Open Access

Effects of High Frequency Mechanical Impact on Fatigue Life of Semi-Automated Gas Metal Arc Welding (GTAW) of HSLA Butt Weld 06002

Salina Saidin, Dahia Andud, Yupiter H. P. Manurung, Muhd. Faiz Mat, Noridzwan Nordin and Martin Leitner

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926906002

• Abstract
• PDF (610.2 KB)
• References

Open Access

Impact Toughness of Gas Metal Arc Welded HY-80 Steel Plate at Sub-zero Temperatures 06003

Herry Oktadinata and Winarto Winarto

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926906003

• Abstract
• PDF (1.063 MB)
• References

Open Access

Microstructure Evolution and Distribution of Mechanical Properties in Shielded Metal Arc Welded Dissimilar DSS 2205 and HY80 Joints 06004

Sunoto Mudiantoro, Winarto Winarto and Herry Oktadinata

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926906004

• Abstract
• PDF (1.350 MB)
• References

Open Access

Assessment of Offshore Piping Composite Repair Technology for Life Extension Program Case in Pertamina Hulu Energy West Madura Offshore 06005

Muhamad Arifin, Arif Cahyono, Idam Putra and Badrul Munir

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926906005

• Abstract
• PDF (583.0 KB)
• References

Materials Engineering

Open Access

The Effect of Melting Temperature Aluminum Metal Casting Using Mixed Degasser Based Sodium Fluoride and Sodium Nitrate 07001

Donanta Dhaneswara, Jaka Fajar Fatriansyah, Raffi Ramadhan and Ahmad Ashari

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926907001

• Abstract
• PDF (4.070 MB)
• References

Open Access

Removal of Oxide Inclusions in Aluminium Scrap Casting Process with Sodium based Fluxes 07002

Widyantoro, Donanta Dhaneswara, Jaka Fajar Fatriansyah, Muhammad Reza Firmansyah and Yus Prasetyo

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926907002

• Abstract
• PDF (479.2 KB)
• References

Open Access

Initial Study for Cerium and Lanthanum Extraction from Bangka Tin Slag through NaOH and HClO₄ Leaching 07003

Badrul Munir, Sulaksana Permana, Anggita Amilia, Ahmad Maksum and Johny W Soedarsono

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926907003

• Abstract
• PDF (459.4 KB)
• References

Open Access

Digitalized Evaluation of Welder Skill by using Cyclogram Characteristics 07004

Seamkong Kuoch, Eakkachai Warinsiriruk and Sutep Joy-A-Ka

Published online: 22 February 2019

DOI: https://doi.org/10.1051/matecconf/201926907004

• Abstract
• PDF (979.9 KB)
• References