EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 269 (2019) MATEC Web Conf., 269 (2019) 01001 References
Open Access
Issue
MATEC Web Conf.
Volume 269, 2019
IIW 2018 - International Conference on Advanced Welding and Smart Fabrication Technologies
Article Number 01001
Number of page(s) 8
Section Welding Technologies
DOI https://doi.org/10.1051/matecconf/201926901001
Published online 22 February 2019
  1. Simoncini M, Forcellese A. Effect of the welding parameters and tool configuration on microand macro-mechanical properties of similar and dissimilar FSW joints in AA5754 and AZ31 thin sheets. Mater Des (2012); 41:50-60. [CrossRef] [Google Scholar]
  2. Honarpisheh M, Asemabadi M, Sedighi M. Investigation of annealing treatment on the interfacial properties of explosive-welded Al/Cu/Al multilayer. Mater Des (2012); 37:122-7. [CrossRef] [Google Scholar]
  3. Mai TA, Spowage AC. Characterization of dissimilar joints in laser welding of steel-Kovar, copper-steel, and copper-aluminum. Mater Sci Eng. A (2004); 374:224-33. [CrossRef] [Google Scholar]
  4. Sheng LY, Yang F, Xi TF, Lai C, Ye HQ. Influence of heat treatment on the interface of Cu/Al bimetal composite fabricated by cold rolling. Composites: Part B (2011); 42:1468-73. [CrossRef] [Google Scholar]
  5. P.L. Threadgill, A.J. Leonard, H.R. Shercliff, P.J. Withers, Friction stir welding of aluminum alloys, International Materials Reviews 54 (2009) 49-93. [Google Scholar]
  6. Z.Y. Ma, Friction stir processing technology: a review, Metallurgical, and Materials Transactions A 39 (2008) 642-658. [CrossRef] [Google Scholar]
  7. A.G. Rao, B.R.K. Rao, V.P. Deshmukh, A.K. Shah, B.P. Kashyap. (2009). Microstructural refinement of a cast hypereutectic Al-30Si alloy by friction stir processing. Elsevier: Materials Letters 63 (2009) 2628-2630. [CrossRef] [Google Scholar]
  8. Mukuna P. Mubiayi, Ester T. Akinlabi, “Friction Stir Welding of Dissimilar Materials between Aluminum Alloys and CopperAn Overview,” Proceedings of the World Congress on Engineering 2013, Vol. III, WCE 2013, July 3 - 5, (2013), ISSN: 2078-0958, London, U.K. [Google Scholar]
  9. Peng Liu, Qingyu Shi, Wei Wang, Xin Wang, Zenglei Zhang, “Microstructure and XRD analysis of FSW joints for copper T2/aluminum 5A06 dissimilar materials”, Materials Letters, 62, (2008), pp 4106-4108. [CrossRef] [Google Scholar]
  10. P. Xue, B.L. Xiao, D.R. Ni, Z.Y. Ma, “Enhanced mechanical properties of friction stir welded dissimilar Al-Cu joint by intermetallic compounds,” Materials Science and Engineering A, (2010) 527, pp 5723-5727. [CrossRef] [Google Scholar]
  11. H. Bisadi, A. Tavakoli, M. Tour Sangsaraki, K. Tour Sangsaraki, “The influences of rotational and the influences of rotational and welding speeds on microstructures and mechanical properties of friction stir welded Al5083, and commercially pure copper sheets lap joints”, Materials and Design, 43, (2013), pp 80-88. [CrossRef] [Google Scholar]
  12. P. Xue, B. L. Xiao, D. Wang, And Z. Y. Ma, “Achieving high property friction stir welded aluminum/copper lap joint at low heat input,” Science and Technology of Welding and Joining,16, No 8, (2011) pp.657-661. [Google Scholar]
  13. Esther T. Akinlabi, Randall D. Reddy, Stephen A. Akinlabi, “Microstructural Characterizations of Dissimilar Friction Stir Welds” Proceedings of the World Congress on Engineering (WCE), 2012, III, pp. 4-6 [Google Scholar]
  14. A. Esmaeili, M. K. BesharatiGivi, H. R. Zareie Rajani, “A metallurgical and mechanical study on dissimilar Friction Stir welding of aluminum 1050 to brass (CuZn30)” Materials Science and Engineering, (2011), A 528, pp. 7093-7102. [CrossRef] [Google Scholar]
  15. P. Xue. B.L. Xiao. D.R, Ni, Z.Y, Ma., Enhanced mechanical properties of friction stir welded dissimilar Al-Cu joint by intermetallic compounds. Elsevier: Materials Science and Engineering A 527 (2010) 5723-5727 [CrossRef] [Google Scholar]
  16. C.W. Tan. Z.G. L. Q, Jiang. Li, Y.B. Chen, X.Y. Microstructural evolution and mechanical properties of dissimilar Al-Cu joints produced by friction stir welding. Elsevier: Materials and Design 51 (2013) 466-473 [CrossRef] [Google Scholar]
  17. Moshwan, Raza. Yusuf, Farazila Yusof. Hasan, M. A. Hassan. Rahmat, S. M. (2014). Effect of tool rotational speed on force generation, microstructure and mechanical properties of friction stir welded AlMg-Cr-Mn (AA 5052-O) alloy. Elsevier: Materials and Design 66 (2015) 118-128 [CrossRef] [Google Scholar]
  18. Aval, Hamed Jamshidi. (2014). Influences of pin profile on the mechanical and microstructural behaviors in dissimilar friction stir welded AA6082– AA7075 butt Joint. Elsevier: Materials and Design 67 (2015) 413-421 [CrossRef] [Google Scholar]
  19. I. Galväo, D. Verdera, D. Gesto, A. Loureiro, D.M. Rodrigues. (2013). Influence of aluminum alloy type on dissimilar friction stir lap welding of aluminum to copper. Elsevier: Journal of Materials Processing Technology 213 (2013) 1920-1928. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.