Open Access
MATEC Web Conf.
Volume 269, 2019
IIW 2018 - International Conference on Advanced Welding and Smart Fabrication Technologies
Article Number 04003
Number of page(s) 10
Section Welding Design, Automation, and Simulation
Published online 22 February 2019
  1. M.R. Karafi, R. Narimani, Y. Hojjat, and M. Gheybi, The International Journal of Advanced Manufacturing Technology, Study on automatic control of arc gap in robotic TIG welding, 50, 953960, (2010). [Google Scholar]
  2. H. Eisazadeh, D.J. Haines, and M. Torabizadeh, Journal of Materials Processing Technology, Effects of gravity on mechanical properties of GTA welded joints, 214, 1136-1142, (2014). [Google Scholar]
  3. S. Okano and M. Mochizuki, Journal of Materials Processing Technology, Transient distortion behavior during TIG welding of thin steel plate, 241, 103-111, (2017). [Google Scholar]
  4. D. Nagesh and G. Datta, Journal of Materials Processing Technology, Prediction of weld bead geometry and penetration in shielded metal-arc welding using artificial neural networks, 123, 303312, (2002). [Google Scholar]
  5. C. Wu, J. Gao, X. Liu, and Y. Zhao, Proceedings of the institution of mechanical engineers, Part B: Journal of Engineering Manufacture, Vision-based measurement of weld pool geometry in constantcurrent gas tungsten arc welding, 217, 879-882, (2003). [Google Scholar]
  6. J. Smith and W. Lucas, Welding Research Abroad, Vision based systems for controlling the arc welding operation and inspecting the weld bead profile, 46, 10-22, (2000). [Google Scholar]
  7. M.A. Houghton, J.J. Lucas, and W. Lucas, Soldagem & Inspecao, Vision systems for monitoring and control of arc welding operations, 12, 293-299, (2007). [Google Scholar]
  8. A.S. BASKORO and Y. SUGA. 232 Investigation of Welding Penetration Control in TIG Welding of an Aluminum Pipe Using Vision Sensing. in The Proceedings of the Materials and processing conference 2006.14. 2006. The Japan Society of Mechanical Engineers. [Google Scholar]
  9. S. Chokkalingham, N. Chandrasekhar, and M. Vasudevan, Journal of Intelligent Manufacturing, Predicting the depth of penetration and weld bead width from the infra red thermal image of the weld pool using artificial neural network modeling, 23, 1995-2001, (2012). [Google Scholar]
  10. P. Ghanty, M. Vasudevan, D. Mukherjee, N. Pal, N. Chandrasekhar, V. Maduraimuthu, A. Bhaduri, P. Barat, and B. Raj, Science and Technology of Welding and Joining, Artificial neural network approach for estimating weld bead width and depth of penetration from infrared thermal image of weld pool, 13, 395-401, (2008). [Google Scholar]
  11. W. Chen and B. Chin, Welding Journal, Monitoring joint penetration using infrared sensing techniques, 69, 181s-185s, (1990). [Google Scholar]
  12. S. Nagarajan, P. Banerjee, and B. Chin, Transport Phenomena in Materials Processing, Thermal imaging for weld quality control in arc welding processes, 146, 171-178, (1990). [Google Scholar]
  13. H.C. Wikle III, F. Chen, S. Nagarajan, and B.A. Chin, Journal of the Chinese institute of engineers, Survey of infrared sensing techniques for welding process monitoring and control, 21, 645-657, (1998). [Google Scholar]
  14. M. Menaka, M. Vasudevan, B. Venkatraman, and B. Raj, Insight-Non-Destructive Testing and Condition Monitoring, Estimating bead width and depth of penetration during welding by infrared thermal imaging, 47, 564-568, (2005). [Google Scholar]
  15. J. Lee and K. Um, Journal of materials processing technology, A prediction of welding process parameters by prediction of back-bead geometry, 108, 106-113, (2000). [Google Scholar]
  16. N. Nandhitha and N. Manoharan, B., Venkataraman, B., Vasudevan, M., Kalyana Sundaram, P. Raj, B.: Prediction of Torch Current Deviation using Feed Forward Neural Network for Monitoring Lack of Penetration from Thermal Images in GTAW of AISI Stainless Steel, Sheela rani, 316, 271-279, (2009). [Google Scholar]
  17. K. Andersen, G.E. Cook, G. Karsai, and K. Ramaswamy, IEEE Transactions on industry applications, Artificial neural networks applied to arc welding process modeling and control, 26, 824830, (1990). [Google Scholar]
  18. I. Milyardi and A.S. Baskoro. Effect of current and speed on porosity in autogenous Tungsten Inert Gas (TIG) welding of aluminum alloys A1100 butt joint. in IOP Conference Series: Materials Science and Engineering. 2018. IOP Publishing. [Google Scholar]
  19. A.S. Baskoro. Monitoring of molten pool image during pipe welding in gas metal arc welding (GMAW) using machine vision. in Advanced Computer Science and Information System (ICACSIS), 2011 International Conference on. 2011. IEEE. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.