Open Access
Issue
MATEC Web Conf.
Volume 269, 2019
IIW 2018 - International Conference on Advanced Welding and Smart Fabrication Technologies
Article Number 02004
Number of page(s) 5
Section Advanced Welding Processes
DOI https://doi.org/10.1051/matecconf/201926902004
Published online 22 February 2019
  1. S. Bozzi, A.L. Helbert-Etter, T. Baudin, B. Criqui, B. and J.G. Kerbiguet, Mater. Sci. Eng. A, 527, 16-17, pp. 4505-4509 (2010). [CrossRef] [Google Scholar]
  2. M. Sakamura, K. Ohishi, K. Ota, and H. Fujii, Strengthening of dissimilar spot welds of Al alloy and steel by friction stirring, Woodhead Publishing Limited (2013). [Google Scholar]
  3. Y.C. Chen, A. Gholinia, A. and P.B. Prangnell, Mater. Chem. Phys., 134, 1, pp. 459-463 (2012). [CrossRef] [Google Scholar]
  4. Y.F. Sun, H. Fujii, N. Takaki, and Y. Okitsu, Mater. Des., 47, pp. 350-357 (2013). [CrossRef] [Google Scholar]
  5. C. S. Jeon, S. T. Hong, Y. J. Kwon, H. H. Cho, and H. N. Han, Trans. Nonferrous Met. Soc. China, 22, pp. s605-s613 (2012). [CrossRef] [Google Scholar]
  6. H. Dong, S. Chen, Y. Song, X. Guo, X. Zhang,.and Z. Sun, Mater. Des., 94, pp. 457-466 (2016). [CrossRef] [Google Scholar]
  7. Y. Uematsu, T. Kakiuchi, Y. Tozaki, and H. Kojin, Sci. and Tech. of Welding and Joining 17, 5, pp. 348-356 (2012). [CrossRef] [Google Scholar]
  8. W. Yuan, R.S. Mishra, S. Webb, Y.L. Chen, B. Carlson, D.R. Herling and G.J. Grant, J. Mater. Process. Tech., 211, 6, pp. 972-977 (2011). [Google Scholar]
  9. R. S. Mishra, and M. W. Mahoney, Friction Stir Welding and Processing, ASM Int., p. 368 (2007). [Google Scholar]
  10. R. S. Coelho, A. Kostka, J. F. dos Santos, and A. Kaysser-Pyzalla, Mater. Sci. Eng. A, 556, pp. 175-183 (2012). [Google Scholar]
  11. G. Buffa, L. Fratini, and M. Piacentini, J. Mater. Process. Technol., 208, 1-3, pp. 309-317 (2008). [CrossRef] [Google Scholar]
  12. T. Liyanage, J. Kilbourne, A. P. Gerlich, and T. H. North, Sci. and Tech. of Welding and Joining, 14, 6, pp. 500-508 (2009). [CrossRef] [Google Scholar]
  13. H. Liu, Y. Zhao, X. Su, L. Yu, and J. Hou, Adv. in Materials Sci. and Eng., 2013, pp. 1-11 (2013). [Google Scholar]
  14. E. Fereiduni, M. Movahedi, and A. H. Kokabi, J. Mater. Process. Technol., 224, pp. 1-10 (2015). [CrossRef] [Google Scholar]
  15. A. Forcellese, F. Gabrielli, and M. Simoncini, Mater. Des., 34, pp. 219-229 (2012). [CrossRef] [Google Scholar]
  16. M. K. Bilici and A. Irfan, Mater. Des., 33, pp. 145-152 (2012). [CrossRef] [Google Scholar]
  17. H. Badarinarayan, Q. Yang, and S. Zhu, Int. J. of Machine Tools & Man. 49, pp. 142-148 (2009). [CrossRef] [Google Scholar]
  18. P. Taylor, K. Miyagawa, M. Tsubaki, T. Yasui, and M. Fukumoto, Welding Int., 23, 9, pp. 648-653 (2009). [CrossRef] [Google Scholar]
  19. K. A. Yasakau, S. Kallip, A. Lisenkov, M. G. S. Ferreira and M. L Zheludkevich, Electrochim. Acta, 211, pp. 126-141 (2016). [CrossRef] [Google Scholar]
  20. G. Figner, R. Vallant, T. Weinberger, H. Schrottner, H. Pasic, and N. Enzinger, Weld. World, 53, no. 1-2, pp. R13-R23 (2009). [CrossRef] [Google Scholar]
  21. J. M. Piccini, and H. G. Svoboda, Procedia Mater. Sci., 8, pp. 868-877 (2015). [CrossRef] [Google Scholar]
  22. R. Z. Xu, D. R. Ni, Q. Yang, C. Z. Liu and Z. Y. Ma, J. Mat. Sci. & Tech., 32, pp. 76-88 (2016). [CrossRef] [Google Scholar]
  23. R. Z. Xu, D. R. Ni, Q. Yang, C. Z. Liu,, and Z. Y. Ma, Mater. Des., 69, pp. 163-169 (2015). [CrossRef] [Google Scholar]
  24. S. Lazarevic, S. F. Miller, J. Li, and B. E. Carlson, J. Manuf. Process., 15, no. 4, pp. 616-624 (2013). [CrossRef] [Google Scholar]
  25. Z. Shen, X. Yang, Z. Zhang, L. Cui, and T. Li, J. Mater., 44, pp. 476-486 (2013). [CrossRef] [Google Scholar]
  26. U. Suhuddin, L. Campanelli, M. Bissolatti, H. Wang, R. Verastegui, and J. F. Santos, Proceedings of the 1st International Joint Symposium on Joining and Welding, Woodhead Publishing Limited, pp 15-21 (2013). [CrossRef] [Google Scholar]
  27. A. M. Takhakh, and M. A. Al-khateeb, J. Eng., 17, 6, pp. 1517-1523 (2011). [Google Scholar]
  28. J. M. Piccini, and H. G. Svoboda, Procedia Mater. Sci., 9, pp. 504-513 (2015). [CrossRef] [Google Scholar]
  29. I. Ibrahim, Y. Uematsu, T. Kakiuchi, Y. Tozaki, and Y. Mizutani, Sci. and Tech. of Welding and Joining, 20, 8, pp. 670-678 (2015). [CrossRef] [Google Scholar]
  30. S. W. Baek, D. H. Choi, C. Y. Lee, B. W. Ahn, Y. M. Yeon, K. Song, and S.B. Jung, Materials Transactions, 51, 5, pp. 1044-1050 (2010). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.