Open Access
| Issue |
MATEC Web Conf.
Volume 269, 2019
IIW 2018 - International Conference on Advanced Welding and Smart Fabrication Technologies
|
|
|---|---|---|
| Article Number | 02011 | |
| Number of page(s) | 7 | |
| Section | Advanced Welding Processes | |
| DOI | https://doi.org/10.1051/matecconf/201926902011 | |
| Published online | 22 February 2019 | |
- N.N., Electricity Generation 2017/2018 Facts and Figures, VGB PowerTech e.V., (2017) [Google Scholar]
- V. Knezevic et al., Procedia Engineering Creep Behaviour of Thick-Wall Alloy 617 Seamless Pipes for 700°C Power Plant Technology, Nr. 55, p. 240-245, (2013) [Google Scholar]
- X. Xie et al., Superalloys for Advanced Ultra-Super-Critical Fossil Power Plant Application” Chapter 3. P.51-76 [Google Scholar]
- D. Di Gianfracesco, Elsevier Science & Technology Materials for Ultra-Supercritical and Advanced Ultra-Supercritical Power Plants”, (2016) [Google Scholar]
- H. W. Ahmad et al., Metals Welding Residual Stress Analysis and Fatigue Strength Assessment of Multi-Pass Dissimilar Material Welded Joint between Alloy 617 and 12Cr Steel, 8 (2018) [Google Scholar]
- S. Li et al., Journal of Materials Processing Technology, Behavior of M23C6 phase in Inconel 617B superalloy during welding, Vol. 258, p. 38-46, (2018). [CrossRef] [Google Scholar]
- A. Klenk, Cluster-Forum Schweißtechnik im Kraftwerksbau, SLV München, Anforderungen an Schweißverbindungen in Hocheffizienz-kraftwerken”, (2009) [Google Scholar]
- B. Kuhn et al., FVW/FVHT, 34. Vortrags-veranstaltung, Beurteilung des Stress-Relaxation-/Strain-Age-Cracking-Verhaltens von Alloy 617B und dessen Schweißverbindungen”, (2011) [Google Scholar]
- J. Mentz et al., Einfluss der Wärmebehandlung auf die Relaxationsrissneigung und die Heißrissneigung von Alloy 617B [Google Scholar]
- H. Xu et al., Materials Characterization, Evolution of carbides and its characterization in HAZ during NG-TIG welding of Alloy 617B”, Vol. 130, p. 270-277 (2017) [CrossRef] [Google Scholar]
- N.N., Hochwarmfeste Nickelbasislegierung NiCr23Co12Mo; Werkstoff-Nr. 2.4673 Stab, Schmiedestück WB 573; Verband der TÜV e. V., Köln, (2013) [Google Scholar]
- G. Göbel et al., Proc. of 26th ICALEO, New Application possibilities for fiber laser welding, (2007) [Google Scholar]
- Dittrich, D et al., Schweißen und Schneiden Laserstrahl-Mehrlagen-Engstspaltschweißen zum verzugsarmen und heißrissfreien Fügen von Aluminiumlegierungen im Dickblechbereich”, Vol. 3, p. 114-117, (2015) [Google Scholar]
- J. Klöwer et al., Procedia Engineering Development of Nickel Alloys Based on Alloy 617 for Components in 700°C Power Plants, Vol. 66, p. 226-231 [Google Scholar]
- N.N., ThyssenKrupp AG, Press release, Higher efficiency, less CO2, New material for 700-degree power plants ready for practical test phase, (2010) [Google Scholar]
- S. Ream, ThyssenKrupp AG, Press release, Trends & Keys to Success In Laser Welding, (2016) [Google Scholar]
- M. Speicher et al., Advances in Materials Technology for Fossil Power Plants, Proc. of 8. Int. Con., Albufeira, 2016, Portugal, Experimental investigations and numerical simulation accompanying the HWT test loop operation [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.