Open Access
| Issue |
MATEC Web Conf.
Volume 269, 2019
IIW 2018 - International Conference on Advanced Welding and Smart Fabrication Technologies
|
|
|---|---|---|
| Article Number | 03010 | |
| Number of page(s) | 7 | |
| Section | Corrosion and Failure Analysis | |
| DOI | https://doi.org/10.1051/matecconf/201926903010 | |
| Published online | 22 February 2019 | |
- J. Billingham,J. V. Sharp,J. Spurrier,P. J. Kilgallon, Review of the performance of high strength steels used offshore Research Report 105 (School of Industrial and Manufacturing Science, Cranfield University, 2003). [Google Scholar]
- K. Nishioka,K. Ichikawa, Progress in thermomechanical control of steel plates and their commercialization, Science and Technology of Advanced Materials, vol. 13, no. 2 (Apr. 2012). [Google Scholar]
- https://masteel.co.uk/2017/01/31/s460g2qm/. Accessed on 4 Jan 2018. [Google Scholar]
- S. Jindal,R. Chhibber,N. Mehta, Issues in welding of HSLA steels, Advanced Materials Research, vol. 365, pp. 44-49 (Switzerland: Trans Tech Publications, 2012) [CrossRef] [Google Scholar]
- R. W. Warke,W. A. Bruce,D. J. Connell,S. R. Harris,M. Kuo,S. J. Norton, Carbon and LowAlloy Steels, Welding Handbook (9th Edition), vol. 4, A. O’Brien, C. Guzman, Eds. (American Welding Society, 2004) [Google Scholar]
- G.B. Marquis,Z. Barsoum, IIW Recommendations for the HFMI Treatment: For Improving the Fatigue Strength of Welded Joints. Singapore: (International Institute of Welding, 2016) [CrossRef] [Google Scholar]
- PITEC GmbH. PIT Short Presentation. https://www.pitec-gmbh.com/application/files/8214/8173/3451/201612-14_17-37_998.pdf. Accessed on 28 Mar. [Google Scholar]
- R. Bjørhovde,J. Brozzetti,G. A. Alpsten,L. Tall, Residual Stresses in Thick Welded Plates, Welding Journal (Welding Research Supplement), pp. 392-405 (Aug 1972) [Google Scholar]
- J. Foehrenbach,V. Hardenacke,M. Farajian, High frequency mechanical impact treatment (HFMI) for the fatigue improvement: numerical and experimental investigations to describe the condition in the surface layer, Welding in the World, vol. 60, no. 4 (July 2016) [Google Scholar]
- D. Simunek,M. Leitner, andM. Stoschka, Numerical simulation loop to investigate the local fatigue behaviour of welded and HFMI-treated joints (IIW Commission XIII Fatigue Of Welded Components And Structures XIII-WG2-136-13) [Google Scholar]
- R. Baptista,V. Infante,C. Branco, Fully Dynamic Numerical Simulation of the Hammer Peening Fatigue Life Improvement Technique, Procedia Engineering, vol. 10 (2011) [Google Scholar]
- M. di Donato, Flow curve determination by torsion tests using inverse modelling, Master’s Degree Dissertation, (Department of Mechanical Engineering, University of Padova, 2016) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.