Open Access
| Issue |
MATEC Web Conf.
Volume 269, 2019
IIW 2018 - International Conference on Advanced Welding and Smart Fabrication Technologies
|
|
|---|---|---|
| Article Number | 01004 | |
| Number of page(s) | 5 | |
| Section | Welding Technologies | |
| DOI | https://doi.org/10.1051/matecconf/201926901004 | |
| Published online | 22 February 2019 | |
- Singh, V. Dey, R. Rai, 5th International Conference of Materials Processing and Characterization (ICMPC 2016), Proceedings 4, 1252-1259, (2017) [Google Scholar]
- Shirvan, I. Choquet, Weld World, 60:821-835, (2016) [CrossRef] [Google Scholar]
- M. Lin, T Eagar, 65th Annual AWS Convention, Texas, April 8-13, (1984) [Google Scholar]
- Y. Feng, Z. Luo, Z. Liu, Y. Li, y. Luo, Y. Huang, Materials and Design 85, 24-31, (2015) [CrossRef] [Google Scholar]
- S. Han et al, Weld World, 57:257-264, (2013) [CrossRef] [Google Scholar]
- V. Nemchinsky, J. Phys. D: Appl. Phys. 29 2659, (1996) [CrossRef] [Google Scholar]
- J. Wang et al, Int. J. Adv. Manuf. Technol., 90:413-420, (2017) [CrossRef] [Google Scholar]
- H. Ham, D. Oh, S. Cho, Science and Technology of Welding and Joining, 17:7, 594-600, (2012) [CrossRef] [Google Scholar]
- P. Kah et al, International Journal of Mechanical and Materials Engineering, 9:15, (2014) [CrossRef] [Google Scholar]
- A. Shirvan, I. Choquet, H. Nilsson, J. Phys. D: Appl. Phys. 49 485201, (2016) [CrossRef] [Google Scholar]
- A. Faraji et al, Int. J. Adv. Manuf. Technol., 71:2059-2071, (2014) [CrossRef] [Google Scholar]
- A. Murphy et al, International Conference on CFD in the Minerals and Process Industries CSIRO, Melbourne, Australia 9-11 December 2009, (2009) [Google Scholar]
- M. Tanaka et al, Metallurgical and Materials Transactions A, Volume 33A, July 2002-2043, (2002) [Google Scholar]
- I. Choquet et al, Proceedings of the Swedish Production Symposium, SPS11, May 3-5, Lund, Sweden, pp. 202-211,( 2011) [Google Scholar]
- B. Jarvis, PhD thesis, University of Wollongong, Wollongong, New South Wales, Australia, (2001) [Google Scholar]
- T. Eagar, Advances in Welding Science & Technology, (1986) [Google Scholar]
- J. Lancaster, Physics in Technology 15 73, (1984) [CrossRef] [Google Scholar]
- Z. Liu et al, Journal of Materials Processing Technology 238 65-72, (2016) [CrossRef] [Google Scholar]
- W. Fan et al, Int J Adv Manuf Technol 92:2207-2216, (2017) [CrossRef] [Google Scholar]
- H. Fujii, Welding International, 19:12, 934-939, (2005) [CrossRef] [Google Scholar]
- K. Mills et al, Phil. Trans. R. Soc. Lond. A, 356: 911-925. (1998) [CrossRef] [Google Scholar]
- G. Haddad, Welding J. 64, 339s, (1985) [Google Scholar]
- The ATLAS Collaboration, Journal of Instrumentation, Volume 3, (2008) [Google Scholar]
- R. Leary et al, Materials Science and Engineering A, 527, 7694-7705, (2010) [CrossRef] [Google Scholar]
- R. French, H. Marin-Reyes, IIW International Conference, 2-3 July, Helsinki, Finland, (2015) [Google Scholar]
- R. French, H. Marin-Reyes, M. Benakis, 8th International Conference on Applied Human Factors and Ergonomics (AHFE 2017), 17-21 Jul 2017, Los Angeles, California, USA, (2017) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.